Stable and radioiodine concentrations in cow milk: dependence on iodine intake

For testing the potential use of stable iodine as a countermeasure to reduce radioiodine transfer to milk, concentrations of stable iodine and radioiodine in the milk of dairy cows fed different amounts of stable iodine were measured. The results indicated that, compared to a normal average stable iodine intake of about 20 mg d(-1) for cows, low iodine dietary intake (<1.5 mg d(-1)) resulted in a reduced transfer of radioiodine to milk by 25%, varying stable iodine intakes in the range of 10-500 mg d(-1) did have no significant effect; at stable iodine intake rates above 1000 mg I d(-1), a reduction by a factor of approximately two was achieved. The high dietary iodine intakes--being about 100 times the normal iodine supply--required to reduce the radioiodine transfer significantly, will result in stable iodine concentrations in milk in excess of advised or legal limits for human consumption. Nevertheless, the provision of stable iodine via the milk pathway might be considered for emergency situations when stable iodine is used as a preventative measure for dose reduction to humans.     

The transfer of 137Cs and 90Sr from feed to rabbits

Radiological assessment of the impact of nuclear weapons testing on the local population in the Semipalatinsk Test Site (STS) requires comprehensive site-specific information on radionuclide behaviour in the environment. However, information on radionuclide behaviour in the conditions of the STS is rather sparse and, in particular, there are no data in the literature on parameters of radionuclide transfer from feed to rabbit products which have been identified as contributors to internal dose to the inhabitants. The transfer of (137)Cs and (90)Sr to rabbit meat was studied under laboratory conditions in a controlled experiment with 32 locally bred rabbits maintained in the Kazakh Agricultural Research Institute. The equilibrium transfer coefficients for (137)Cs and (90)Sr from feed to rabbit meat were estimated to be 0.4 d kg(-1) and 0.15 d kg(-1), respectively. The biological half-lives were estimated to be 0.1 d for (137)Cs and 0.14 d for (90)Sr. Whereas for (137)Cs the distribution in the body is relatively homogeneous, there are large differences between the organs and tissues for (90)Sr for which, as expected, the highest concentrations were found in bone.     

Spatiotemporal Variability of Modeled Watershed Scale Surface‐Depression Storage and Runoff for the Conterminous United States

This study explores the viability of using simulated monthly runoff as a proxy for landscape‐scale surface‐depression storage processes simulated by the United States Geological Survey’s National Hydrologic Model (NHM) infrastructure across the conterminous United States (CONUS). Two different temporal resolution model codes (daily and monthly) were run in the NHM with the same spatial discretization. Simulated values of daily surface‐depression storage (treated as a decimal fraction of maximum volume) as computed by the daily Precipitation‐Runoff Modeling System (NHM‐PRMS) and normalized runoff (0 to 1) as computed by the Monthly Water Balance Model (NHM‐MWBM) were aggregated to monthly and annual values for each hydrologic response unit (HRU) in the CONUS geospatial fabric (HRU; n = 109,951) and analyzed using Spearman’s rank correlation test. Correlations between simulated runoff and surface‐depression storage aggregated to monthly and annual values were compared to identify where which time scale had relatively higher correlation values across the CONUS. Results show Spearman’s rank values >0.75 (highly correlated) for the monthly time scale in 28,279 HRUs (53.35%) compared to the annual time scale in 41,655 HRUs (78.58%). The geographic distribution of HRUs with highly correlated monthly values show areas where surface‐depression storage features are known to be common (e.g., Prairie Pothole Region, Florida).     

Molecular tools for bathing water assessment in Europe: Balancing social science research with a rapidly developing environmental science evidence-base

The use of molecular tools, principally qPCR, versus traditional culture-based methods for quantifying microbial parameters (e.g., Fecal Indicator Organisms) in bathing waters generates considerable ongoing debate at the science–policy interface. Advances in science have allowed the development and application of molecular biological methods for rapid (~2 h) quantification of microbial pollution in bathing and recreational waters. In contrast, culture-based methods can take between 18 and 96 h for sample processing. Thus, molecular tools offer an opportunity to provide a more meaningful statement of microbial risk to water-users by providing near-real-time information enabling potentially more informed decision-making with regard to water-based activities. However, complementary studies concerning the potential costs and benefits of adopting rapid methods as a regulatory tool are in short supply. We report on findings from an international Working Group that examined the breadth of social impacts, challenges, and research opportunities associated with the application of molecular tools to bathing water regulations.     

Review of Russian language studies on radionuclide behaviour in agricultural animals: 3. Transfer to muscle

Over 150 publications reporting studies conducted in the former USSR were reviewed to provide transfer coefficients (F_f) to the muscle of domestic animals from experiments using chronic administration, often for long timescales in large scale experiments. Only a few of these studies were made available in the English language literature or taken into account in international reviews. The values derived have been compared with expected values reported by the IAEA's Handbook of parameter values for the prediction of radionuclide transfer in temperate environments (TRS 364) where possible. The information presented here has been used in the current updating of parameters recommended for environmental assessments by the IAEA. Many of the reported values are for Sr due to the Mayak accident and Cs due to the Chernobyl accident. Nevertheless, the reported data for a wide range of radionuclides, in particular for Ru, Sb, and Zn markedly improve the extent of available data.     

Review of Russian-language studies on radionuclide behaviour in agricultural animals: part 4. Transfer to poultry

Data on radionuclide transfer to domestic chickens and ducks obtained from research performed in the former Soviet Union were reviewed to provide transfer coefficient values (Ff) to poultry and edible egg contents. The majority of the data are from experiments with ⁹⁰Sr and ¹³⁷Cs, reflecting the importance of these radionuclides after global fallout and major radiation accidents. Data for ³H, ⁵⁴Mn, ⁵⁹Fe, ⁶⁰Co, ²²Na ⁶⁵Zn, ¹³¹I and U are also given. The values derived have been compared with those in the current IAEA Handbook of parameter values for the prediction of radionuclide transfer in temperate environments (TRS 364) and the recent revision which incorporates the values from this paper. The Russian-language data give improved estimates for many radionuclides and the revised handbook is now based on the better quality data given for chronic administration.     

LogD: lipophilicity for ionisable compounds

The octanol/water partition coefficient (Kow) for organic compounds is widely used in predictive environmental studies. A significant proportion of contaminants of surface and ground water are ionisable (e.g. many pesticides, pharmaceuticals, metabolites). Such compounds may be partially ionised dependent on the pH. Since the neutral and ionic species exhibit different polarities, the Kow value of ionisable pesticides is pH dependent. It is therefore essential to determine Kow values over the full range of pH that occurs in the environment in order to get appropriate predictors. Numerous methods are available to measure lipophilicity but only a few are appropriate for ionisable pesticides (e.g. pH metric and filter probe methods). Parameters such as pH and ionic strength need to be carefully controlled when working with ionisable compounds. Variation of these factors probably explains why literature can yield Kow values that differ by more than one order of magnitude for some compounds. In this article, Kow values obtained for six acidic pesticides with three different methods are compared as well (data from the literature, measured by pH metric method and calculated with five computer programs). The values used in predictive regression equations needs to be either measured with a suitable method or selected from the literature with great care.