Constitutive model for municipal solid waste incorporating mechanical creep and biodegradation-induced compression

A constitutive model is proposed to describe the stress–strain behavior of municipal solid waste (MSW) under loading using the critical state soil mechanics framework. The modified cam clay model is extended to incorporate the effects of mechanical creep and time dependent biodegradation to calculate total compression under loading. Model parameters are evaluated based on one-dimensional compression and triaxial consolidated undrained test series conducted on three types of MSW: (a) fresh MSW obtained from working phase of a landfill, (b) landfilled waste retrieved from a landfill after 1.5 years of degradation, and (c) synthetic MSW with controlled composition. The model captures the stress–strain and pore water pressure response of these three types of MSW adequately. The model is useful for assessing the deformation and stability of landfills and any post-closure development structures located on landfills.     

Fluoride removal by a continuous flow electrocoagulation reactor

Long-term consumption of water containing excessive fluoride can lead to fluorosis of the teeth and bones. Electrocoagulation (EC) is an electrochemical technique, in which a variety of unwanted dissolved particles and suspended matter can be effectively removed from an aqueous solution by electrolysis. Continuous flow experiments with monopolar aluminium electrodes for fluoride removal were undertaken to investigate the effects of the different parameters such as: current density (12.5-50A/m(2)), flow rate (150-400 mL/min), initial pH (4-8), and initial fluoride concentration (5-25mg/L). The highest treatment efficiency was obtained for the largest current and the removal efficiency was found to be dependent on the current density, the flow rate and the initial fluoride concentration when the final pH ranged between 6 and 8. The composition of the sludge produced was analysed using the X-ray diffraction (XRD) spectrum. The strong presence of the aluminium hydroxide [Al(OH)(3)] in the above pH range, which maximizes the formation of aluminium fluoride hydroxide complex [Al(n)F(m)(OH)(3n-m)], is the main reason for defluoridation by electrocoagulation. The results obtained showed that the continuous flow electrocoagulation technology is an effective process for defluoridation of potable water supplies and could also be utilized for the defluoridation of industrial wastewater.     

Phosphate solubilizing actinomycetes in the estuarine environment: an inventory.

Sediment samples were collected from different stations of the Vellar estuary for isolation of total actinomycetes and phosphate solubilizing actinomycetes. Phosphatase activity in the sediments was also investigated Consistently a higher number of actinomycetes, phosphate solubilizing actinomycetes and phosphatase activity were recorded from the clay sediments than the sandy sediments at all the stations. In all, 7 strains showed positive phosphatase activity. Among them, one strain PS-3 exhibited good activity and was further investigated for optimum phosphorus solubilization at different pH (6, 6.5, 7, 7.5 and 8) and incubation (1st day to 20th day) periods. The solubilizing activity was maximum at the pH 7 and an incubation period of 13 days was required for an appreciable quantity of phosphorus to be leached into the medium. Based on the chemotaxonomical and conventional methods of identification, the strain PS-3 has been tentatively identified as Streptomyces galbus. The present study indicates that phosphatase enzyme and S. galbus along with other actinomycetes species would play a major role in solubilizing the phosphate in the estuarine ecosystem and increasing the soluble phosphate concentration thereby enhancing the productivity     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

Partial purification and anti-leukemic activity of L-asparaginase enzyme of the actinomycete strain LA-29 isolated from the estuarine fish, Mugil cephalus (Linn.)

The actinomycete strain LA-29 isolated from the gut contents of the fish, Mugil cephalus of the Vellar estuary showed excellent L-asparaginase activity The enzyme was purified 18-fold and the final recovery of protein was 1.9%, which exhibited an activity of 13.57 IU/mg protein. The partially purified L-asparaginase inhibited the growth of leukemia cells in male wistar rats. Average survival period of the rats was more in an optimum enzyme dose of 100 units and the survival period was less when the dosages were increased and at the same time the enzyme became less effective when the dosages were decreased. Higher survival of 17.2 days was recorded when 100 units of the enzyme was given in three intermittent doses (50/25/25 units) at the interval of 24 hr. Analysis of cell components of the strain LA-29 has revealed the wall type-I which is the characteristic of the genus Streptomyces. Further the morphological, physiological and biochemical features along with the micromorphological results obtained for the strain LA-29 were compared with that of the Streptomyces species found in Bergey's Manual of Determinative Bacteriology and the strain LA-29 has been tentatively identified as Streptomyces canus.     

Review of pollutants removed by electrocoagulation and electrocoagulation/flotation processes

The word “electrocoagulation” (EC) will be sometimes used with “electroflotation” (EF) and can be considered as the electrocoagulation/flotation (ECF) process. Through the process of electrolysis, coagulating agents such as metal hydroxides are produced. When aluminium electrodes are used, the aluminium dissolves at the anode and hydrogen gas is released at the cathode. The coagulating agent combines with the pollutants to form large size flocs. As the bubbles rise to the top of the tank they adhere to particles suspended in the water and float them to the surface. In fact, a conceptual framework of the overall ECF process is linked to coagulant generation, pollutant aggregation, and pollutant removal by flotation and settling when it has been applied efficiently to various water and wastewater treatment processes. This review paper considers a significant number of common applications of EC and ECF processes which have been published in journal and conference papers.     

Impact of metals on histopathology and expression of HSP 70 in different tissues of Milk fish (Chanos chanos) of Kaattuppalli Island, South East Coast, India

Histological and Immunohistochemical studies were carried out to document the possible impact of heavy metal contamination in different tissues of Chanos chanos. Heavy metals such as Cu, Pb, Zn, Cd, Mn and Fe were predominant in water, sediment and biota of Kaattuppalli Island and varied significantly between two different sites. Histological changes such as swelling of muscle fiber and break down of muscle bundles were noted in the muscle. Similarly gill filament cell proliferation, increase in intercellular spaces and primary and secondary lamellar epithelium were evident in gills. The hepatocytes showed damage of central vein and rupture of irregular hepatic plate with more number of vacuoles in the fish collected from polluted site compared to that from the less polluted site. The impact of pollution was also assessed in different tissues by immunohistochemistry using primary antibody (mouse monoclonal HSP70 antibody 1:2000) and secondary antibody (HRP conjugated antibody) for expression of stress protein. Immunostaining analysis showed expression of HSP70 with high intensity in the tissues of fish collected from polluted site compared to less polluted sites. Further, HSP70 positive cells were analyzed from six locations per fish tissue section. One-way analysis of variance (ANOVA) followed by least significant difference (LSD) was used to check if the expression was significant. Results indicate that the values are statistically significant at the two different sampling sites (P<0.05).     

EVIDENCE OF CHAOTIC BEHAVIOR IN SINGAPORE RAINFALL1

ABSTRACT: This paper focuses on the investigation of the existence of chaotic behavior in the Singapore rainfall data. The procedure for the determination of the minimum number of variables essential and the number of variables sufficient to model the dynamics of the rainfall process was studied. An analysis of the rainfall behavior of different time periods was also conducted. The correlation dimension was used as a basis for discriminating stochastic and chaotic behaviors. Daily rainfall records for durations of 30, 20, 10, 5, 4, 3, 2, and 1 years from six stations were analyzed. The delay time for the phase-space reconstruction was computed using the autocorrelation function approach. The results provide positive evidence of the existence of chaotic behavior in the daily rainfall data. The minimum number of variables essential to model the dynamics of the rainfall process was identified to be 3 while the number of variables sufficient to model the dynamics of the rainfall process ranges from 11 to 18. The results also suggest that the attractor dimensions of rainfall data of longer time periods are higher than that of shorter time periods. The study suggests a minimum number of 1500 data points required for the computation of the correlation dimension of the rainfall data.     

Selection of optimum fish oil fuel blend to reduce the greenhouse gas emissions in an IC engine—A hybrid multiple criteria decision aid approach

The increasing demand on energy due to population growth and rising of living standards has led to considerable use of fossil fuels which has in turn, had an adverse impact on environmental pollution and depletion of fossil fuels in Internal Combustion (IC) engine sector. Alternative fuel blend evaluation in IC engine fuel technologies is a very important strategic decision involving decisions balancing within a number of criteria and opinions from different decision maker of IC engine experts. The selection of appropriate source of biodiesel and proper blending of biodiesel plays a major role in alternate energy production. This paper describes an application of hybrid Multi Criteria Decision Making (MCDM) technique for the selection of optimum biodiesel blend in the IC engine. The proposed model, Analytical Network Process (ANP) is integrated with Technique for Order Performance by Similarity to Ideal Solution (TOPSIS) to evaluate the optimum blend. Here the ANP is used to determine the relative weights of the criteria, whereas TOPSIS is used for obtaining the final ranking of alternative blends. An efficient pair-wise comparison process and ranking of alternatives can be achieved for optimum blend selection through the integration of ANP and TOPSIS. The obtained preference order for the blends are as B20 > B40 > Diesel > B60 > B80 > B100. This paper highlights a new insight into MCDM techniques to evaluate the best fuel blend for the decision makers such as engine manufactures and R&D engineers to meet the fuel economy and emission norms to empower the green revolution.