Can nuclear aquatic environmental DNA be a genetic marker for the accurate estimation of species abundance?

The Science of Nature - We present the first study that compares phenological variation in parasite load and inflammatory response in a lizard with asynchronous male and female gonadal cycles....     

Transportation and fate of cationic surfactant in river water

The degradation, sorption, transportation and material balance of cationic surfactants discharged from domestic waste into river water was studied. Ion-pair solid-phase extraction behavior showed that the sorption of cationic surfactants as an ion-pair with anionic surfactant onto river sediment was so strong that little cationic surfactant was found in the bulk water. Cationic surfactant was found in river sediment at more than 500 times higher concentration than that in the bulk water. The degradation of the cationic surfactant was very slow in river water and much slower in the sediment. A material balance of cationic surfactant was estimated for a river running through Toyama City by measuring the flow rate and the concentration of cationic surfactant in the water at several points. It was found that more than 30% of cationic surfactant introduced to the river was lost during the river running through ca. 3 km in 3 h. This reduction probably comes from a quick transfer of the cationic surfactant from river water to sediment and water weed by means of adsorption or precipitation with suspending solids.     

Removal of Linear and Branched p-Alkylphenols from Aqueous Solution by Combined Use of melB Tyrosinase and Chitosan Beads

In this study, melB tyrosinase was applied for enzymatic removal of linear and branched p-alkylphenols from aqueous solutions. First, systematic studies were carried out to estimate the effects of the process parameters such as the temperature, pH value, and enzyme dose on quinone conversion of p-cresol as a model phenol compound. A variety of p-alkylphenols were removed from aqueous solutions through the tyrosinase-catalyzed quinone conversion and subsequent nonenzymatic adsorption of quinone derivatives on chitosan beads at pH 6.0 and 30 °C under the optimum conditions determined for p-cresol. The % removal values of 98–100 were obtained for p-n-alkylphenols. Branched p-alkylphenols with a weak estrogenic activity containing 4-tert-butylphenol and 4-tert-pentylphenol, which underwent no quinone conversion by commercially available mushroom tyrosinase in the absence of H₂O₂, were also effectively removed by further increasing either the melB tyrosinase concentration or the amount of added chitosan beads. The present technique is much effective in the fact that a series of reactions rapidly progress under mild conditions and the chitosan beads can be readily separated from the reaction medium after the enzymatic treatment.     

A novel mechanical plant compression system for biomass fuel and acquisition of squeezed liquid with water-soluble lignin as anti-virus materials

Journal of Material Cycles and Waste Management - Plant biomass could be a viable alternative renewable resource, but the moisture content must be reduced to use it as fuel. Mechanical compression...     

Designing a purification process for chromium-, copper- and arsenic-contaminated wood

The disposal of chromated copper arsenate (CCA)-treated wood is becoming a serious problem in many countries due to increasing levels of contamination by the hazardous elements, chromium, copper and arsenic. The present experiment was conducted as a preliminary step toward one-step solvent extraction of CCA-treated wood. Because chromium, copper and arsenic have different chemical characteristics, it is best to consider them separately prior to designing a one-step extraction process. As a basis, various two-step extraction processes were first designed and tested experimentally to determine feasibility. Among these combinations, the treatment combining oxalic acid as the 1st step and a sodium oxalate solution under acidic conditions (pH 3.2) as the 2nd step was found to be an effective way of extracting CCA elements from treated wood. Extraction efficiency reached 100% for arsenic and chromium and 95.8% for copper after a 3-h sodium oxalate treatment, following a 1-h pre-extraction process with oxalic acid. On the other hand, the same combination under alkaline conditions (pH 11.2) during the 2nd step was ineffective for copper removal, indicating that pH plays an important role in complexation with sodium oxalate solution. The present results suggest that the extraction of CCA elements using a combination of oxalic acid and acidic sodium oxalate solution is a promising basis for application to a one-step extraction method.     

Behavior of di(2-ethylhexyl) phthalate discharged from domestic waste water into aquatic environment

The behavior of di(2-ethylhexyl) phthalate (DEHP) discharged from domestic waste water into river water, sediment and submerged aquatic vegetation was investigated. The concentrations of DEHP were found to be between 8-25 microg L(-1) in river water, 1,000-2,000 microg kg(-1) in sediment and less than 20-2,000 microg kg(-1) in submerged aquatic vegetation. The experiments performed in laboratory were on the biodegradation of DEHP in water and sediment, and also adsorption equilibrium of DEHP between water and sediment. The results obtained from the investigations made it clear that the high enrichment of DEHP from water to sediment was caused from not only its high adsorptive potential but also slow degradation in sediment.     

Upgrading of poly(vinyl chloride) by chemical modifications using sodium sulfide

The recycling of poly(vinyl chloride) (PVC) is one of the most important issues in the treatment of waste plastics. To improve PVC recycling, it is necessary to develop new recycling techniques, including new techniques for the dechlorination of chlorine-containing polymers. It has been established that wet dechlorination of PVC in NaOH/ethylene glycol solution is more effective than dry dechlorination. In this study, the wet process was used, and the chemical modification of PVC by nucleophilic substitution was considered for upgrading waste PVC. Chlorine was substituted in solution by several nucleophilic reagents, thus changing the properties of PVC. The reaction of PVC in Na2S/ethylene glycol solution at 170°C resulted in the formation of a mixture comprising 32% elimination and 26% substitution products. The scanning electron microscopy/energy dispersive X-ray spectroscopy mappings and elementary analysis of PVC indicated that this chlorine-substitution process led to cross-linking by sulfur.     

Destruction of polychlorinated naphthalenes by a high-temperature melting treatment (GeoMelt process)

A series of treatment experiments were carried out to evaluate the applicability of a high-temperature melting treatment (GeoMelt process) to the destruction of polychlorinated naphthalene (PCN) formulation. We started with 10-kg-scale experiments in which a small melting furnace was used and then scaled up to a 1-t-scale experiment in which a melting furnace that resembled an actual treatment system was used. These runs were evaluated whether destruction efficiency (DE) of total PCNs was more than 99.999 % and whether concentrations of PCNs and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/DFs) in vitrified materials, emission gas, and scrubber water were below the target levels. Because DE values and the target levels of PCNs and PCDDs/DFs in these runs were satisfactory, then we carried out a demonstrative experiment using the actual treatment system and confirmed destruction of PCNs. Based on good results of the demonstrative experiment, stock of PCN formulation was successfully treated continuously.     

Detection of dicofol and related pesticides in human breast milk from China, Korea and Japan

Previously, we demonstrated that the concentrations of DDTs were greater in breast milk collected from Chinese mothers than from Japanese and Korean mothers. To investigate dicofol as a possible source of the DDTs in human breast milk, we collected breast milk samples from 2007 to 2009 in China (Beijing), Korea (Seoul, Busan) and Japan (Sendai, Takarazuka and Takayama). Using these breast milk samples, we quantified the concentrations of dichlorobenzophenone, a pyrolysis product of dicofol (simply referred to as dicofol hereafter), dichlorodiphenyltrichloroethane and its metabolites (DDTs) using GC-MS. Overall, 12 of 14 pooled breast milk samples from 210 mothers contained detectable levels of dicofol (>0.1 ng g⁻¹ lipid). The geometric mean concentration of dicofol in the Japanese breast milk samples was 0.3 ng g⁻¹ lipid and significantly lower than that in Chinese (9.6 ng g⁻¹ lipid) or Korean breast milk samples (1.9 ng g⁻¹ lipid) (p < 0.05 for each). Furthermore, the ΣDDT levels in breast milk from China were 10-fold higher than those from Korea and Japan. The present results strongly suggest the presence of extensive emission sources of both dicofol and DDTs in China. However, exposure to dicofol cannot explain the large exposure of Chinese mothers to DDTs because of the trace levels of dicofol in the ΣDDTs. In the present study, dicofol was confirmed to be detectable in human breast milk. This is the first report to identify dicofol in human samples.     

Solubility parameters for determining optimal solvents for separating PVC from PVC-coated PET fibers

Poly(vinyl chloride) (PVC) in PVC-coated poly(ethylene terephthalate) (PET) fabrics can be separated through dissolution in a suitable solvent, leaving only the PET fibers. We investigated the solubility of PVC in 30 solvents using swelling tests. The results were compared with those obtained using the Hansen, Gutmann, Swain, E _T(30), and Kamlet–Taft parameters. For this purpose, Gaussian plots of the PVC swellability versus solubility parameter were used to decide the applicability of the solubility parameter system. Only Gutmann’s electron acceptor–donor parameter (AN + DN) and the Kamlet–Taft parameters β and π* could describe the PVC-solvent system satisfactorily. Tetrahydrofuran (THF), methyl ethyl ketone (MEK), N,N-dimethylformamide (DMF), cyclohexanone, and cyclopentanone were tested for separating PVC from PET at different temperatures. THF dissolved PVC at 20 °C, while cyclohexanone and cyclopentanone did so at 40 °C. Traces of PVC remained on the PET fibers when DMF was used. Complete dissolution of PVC was not achieved at any temperature with MEK. The present work shows that solubility parameters are a helpful tool for the search for suitable solvents. It shows also that solubility parameters have to be selected carefully, since their usefulness depends strongly on the polymer properties.