Speciation of heavy metals in biosolids of wastewater treatment plants at Mysore,Karnataka, India

Urban wastewater treatment leads to the generation of large quantities of biosolids. Accumulation of biosolids is a problem of environmental relevance due to the existence of heavy metals in the biosolids. Determination of total metal in biosolid provides information relating pollution levels. Determination of their mobilization capacity and behaviour in the environment is an important task. An experimental approach commonly used for studying the mobility, transport and bioavailability of metal in biosolids is the use of selective sequential extraction procedure. In the present study an attempt has been made to study the heavy metal properties in biosolid samples collected from urban wastewater treatment plants located at Mysore, Karnataka. Few heavy metals selected for the present study are cadmium, chromium, copper, iron, nickel and zinc. The concentration of these metals in biosolids and their partition in different fractions are studied. The speciation of metals based on the sequential extraction scheme was carried out. The concentration of heavy metals is lower than that established by European legislation. The residual fraction has the maximum percentage of heavy metals whereas, only a small fraction of heavy metals (Fe, Zn and Cd) are extracted in the most soluble fractions, exchangeable and carbonate fractions.     

Severity analysis of Indian coal mine accidents – A retrospective study for 100 years

A retrospective study on severity analysis of Indian coal mines accidents for 100 years was done considering fatal and serious accidents and the resulting causalities. The impact of recommendations based on safety conferences and committees over the years was studied. An event evaluation algorithm (EEA) was developed for this purpose. The hazard rate functions and cumulative risk functions for major hazards in Indian coal mines were developed. The study evaluated the status of safety level as well as the scope of improvement for Indian coal mines safety.     

Effects of arsenic on reactive oxygen species and antioxidant defense system in tomato plants

In this study, the generation of reactive oxygen species, the induction of oxidative stress, and the response of the antioxidative system in hydroponically grown tomato plants as the cause of arsenic-induced phytotoxicity are investigated. Reduction in plant growth was measured in terms of dry weight and length of roots and shoots, the latter accumulating more arsenic than the roots. The treatment resulted in increased formation of superoxide anion (O₂^.?), H₂O₂, and thiobarbituric acid reactive substances, which indicate augmented lipid peroxidation. Superoxide dismutase, catalase (CAT), and ascorbate peroxidase activities were increased in arsenic-treated tomato plants while CAT activity was insignificantly increased.     

Evolution in mitigation approaches for petroleum oil-polluted environment: recent advances and future directions

Environmental Science and Pollution Research - Increasing petroleum consumption and a rise in incidental oil spillages have become global concerns owing to their aquatic and terrestrial toxicity....     

Antioxidative responses in relation to growth of mustard (Brassica juncea cv. Pusa Jaikisan) plants exposed to hexavalent chromium

Effect of hexavalent chromium (Cr6+) was seen on Brassica juncea cv. Pusa Jaikisan grown for 15 days in hydroponic culture supplemented with 0.2, 2 and 20 microM Cr. The inhibitory response of Cr6+ on growth of B. juncea was concentration and time dependent. The stimulation of plant growth, observed in response to exposure to 0.2 microM Cr6+, during initial 5 days was reversed on prolonged treatment and at higher Cr6+ concentrations (2 and 20 microM Cr6+). Despite reduction in growth, chlorophyll content increased substantially on 15 days exposure to 20 microM Cr6+. Significant increases in lipid peroxidation and tissue concentration of H2O2 occurred in plants exposed to 2 and 20 microM Cr6+. Effect of Cr6+ on antioxidative enzymes in roots and leaves was differential. SOD and CAT activities at lower levels of Cr6+ supply remained higher all through the treatment. While APX was very susceptible to excess Cr6+, GR and GST increased at elevated levels of Cr6+. The results suggested Cr6+ induced depression in plant growth of B. juncea to be a function of increased cellular accumulation of Cr despite increase in the activities of some of the antioxidative enzymes.     

Studies on Rhizospheric Mycoflora of Tea (Camellia sinensis):In vitro Antagonism with Dominant Bacteria

The rhizospheres of established tea bushes have some specificcharacteristics which are associated with the long lived nature of teaplants,viz.,negative rhizospheric effect,lowering of soil pH,antagonistic activities among microbial communities and dominan…     

Heavy Metal Accumulation in Lichens from the Hetauda Industrial Area Narayani Zone Makwanpur District, Nepal

Lichen samples collected in and around Hetauda Industrial area,(HIA) Narayani zone, Makwanpur district, Nepal, were analyzedfor Cr, Ni, Pb, Zn, Ca, Mn, Fe, Si, and Al. The samples fromthe location inside the industrial area have higher levels ofmetal than the outside areas. Pyxine meissnerina growinginside the industrial area accumulated higher levels of all themetals analyzed.     

COVID-19 and increasing demand for medical oxygen: can impurity be a problem?

Environmental Science and Pollution Research -     

N-doped mesoporous alumina for adsorption of carbon dioxide

N-doped mesoporous alumina has been synthesized using chitosan as the biopolymer template. The adsorbent has been thoroughly investigated for the adsorption of CO₂ from a simulated flue gas stream (15% CO₂ balanced with N₂) and compared with commercially available mesoporous alumina procured from SASOL, Germany. CO₂ adsorption was studied under different conditions of pre-treatment and adsorption temperature, inlet CO₂ concentration and in the presence of oxygen and moisture. The adsorption capacity was determined to be 29.4 mg CO₂/g of adsorbent at 55℃. This value was observed to be 4 times higher in comparison to that of commercial mesoporous alumina at a temperature of 55℃. Basicity of alumina surface coupled with the presence of nitrogen in template in synthesized sample is responsible for this enhanced CO₂ adsorption. Adsorption capacity for CO₂ was retained in the presence of oxygen; however moisture had a deteriorating effect on the adsorption capacity reducing it to nearly half the value.     

Occupational injury and accident research: A comprehensive review

In this paper, a comprehensive review of the concepts of occupational injury and accident causation and prevention is presented. Starting with hazard identification, the issues on risk assessment, accident causation, and intervention strategies are discussed progressively. The distinctiveness and overlaps in accident and injury research are highlighted. Both empirical research in terms of hypotheses tested and theoretical research such as accident causation models are compared and contrasted. Finally, based on the critical appraisal of the comprehensive review, future research directions on occupational injury research are delineated.