Highly active photocatalytic coatings prepared by a low-temperature method

Photocatalytic properties of titanium (IV) oxide (TiO₂) in anatase form can be used for various purposes, including photocatalytic purification of water. For such an application, suspended or fixed photocatalytic reactors are used. Those with fixed phase seem to be preferred due to some advantages, one of which is the avoidance of photocatalyst filtration. To avoid leaching and exfoliation of the fixed phase, an immobilization procedure leading to a good adhesion of a catalyst to a substrate is crucial. Within this work, we present physical and photocatalytic characterization results of five commercially available TiO₂ photocatalysts (P25, P90, PC500, KRONOClean 7000, VPC-10) and one pigment (Hombitan LO-CR-S-M), which were successfully immobilized on glass slides by a “sol suspension” procedure. Different mechanical tests and characterization methods were used to evaluate the stability and morphology of the layers. Evaluation of photocatalytic activity was done by tests under UVA and UV–vis irradiation, using a method based on the detection of the fluorescent oxidation product of terephthalic acid (TPA), i.e., hydroxyterephthalic acid (HTPA). Aeroxide® P90 incorporated into the silica-titania binder was the most photocatalytically active layer and, unlike the others, showed significant increase of photocatalytic activity through the entire range of tested UVA irradiation intensities (2.3 mW/cm²–6.1 mW/cm²). The high mechanical stability of some photocatalytic layers allows using them in water photocatalytic purification reactions.     

Health risk assessment of potentially harmful elements and dietary minerals from vegetables irrigated with untreated wastewater,Pakistan

In the developing world, vegetables are commonly grown in suburban areas irrigated with untreated wastewater containing potentially harmful elements (PHEs). In Pakistan, there is no published work on the bioaccessibility aspect of PHEs and dietary minerals (DMs) in sewage-irrigated soil or the vegetables grown on such soils in Pakistan. Several industrial districts of Pakistan were selected for assessment of the risk associated with the ingestion of vegetables grown over sewage-irrigated soils. Both the total and bioaccessible fraction of PHEs (Cd, Co, Cr, Ni, and Pb) and DMs (Fe, Cu, Mn, Zn, Ca, Mg, and I) in soils and vegetable samples were measured. The concentrations of these PHEs and DMs in sewage-irrigated and control soils were below published upper threshold limits. However, compared to control soils, sewage irrigation over the years decreased soil pH (7.7 vs 8.1) and enhanced dissolved organic carbon (1.8 vs 0.8 %), which could enhance the phyto-availability of PHEs and DMs to crops. Of the PHEs and DMs, the highest transfer factor (soil to plant) was noted for Cd and Ca, respectively. Concentrations of PHEs in most of the sewage-irrigated vegetables were below the published upper threshold limits, except for Cd in the fruiting portion of eggplant and bell pepper (0.06–0.08 mg/kg Cd, dry weight) at three locations in Gujarat and Kasur districts. The bioaccessible fraction of PHEs can reduce the context of dietary intake measurements compared to total concentrations, but differences between both measurements were not significant for Cd. Since the soils of the sampled districts are not overly contaminated compared to control sites, vegetables grown over sewage-irrigated soils would provide an opportunity to harvest mineral-rich vegetables potentially providing consumers 62, 60, 12, 104, and 63 % higher dietary intake of Cu, Mn, Zn, Ca, and Mg, respectively. Based on Fe and vanadium correlations in vegetables, it is inferred that a significant proportion of total dietary Fe intake could be contributed by soil particles adhered to the consumable portion of vegetables. Faecal sterol ratios were used to identify and distinguish the source of faecal contamination in soils from Gujranwala, Gujarat, and Lahore districts, confirming the presence of human-derived sewage biomarkers at different stages of environmental alteration. A strong correlation of some metals with soil organic matter concentration was observed, but none with sewage biomarkers.     

Study of heavy metals in some environmental samples

Fuels like coal and rubber are frequently used for brick burning. However, both coal and rubber contain heavy metals. These heavy metals may elutriate in the wake of fly ash or may adsorb or absorb in the product. The present work deals with the analysis of heavy metals in some samples collected from brick burning industries located in the vicinity of a metropolitan city, Peshawar, Pakistan. Samples from raw clay, product, chimney scale and fossil fuel & rubber were collected and leached with acid mixture. The leachates were concentrated and analyzed by atomic absorption spectrophotometer for the determination of chromium (Cr), lead (Pb), cadmium (Cd) and antimony (Sb). It was observed that heavy metals are present in clay, brick and chimney scale. However, significant amount of these metals was observed in chimney scale. It is inferred that such emanations laden with heavy metals are accompanying the stack gases which are being dumped in to the environment. In order to avoid environmental problems, strict environmental regulations shall be enforced and a constant check on these emanations to the environment must be made to ensure clean air act.     

Determination trace amounts of copper, nickel, cobalt and manganese ions in water samples after simultaneous separation and preconcentration

In the present article, a simple, rapid, sensitive and economical method has been developed for the simultaneous separation and preconcentration of the trace amounts of copper, nickel, cobalt and manganese in water samples by using modified XAD-4 resins. The sorption was quantitative in the pH range 6.0–9.0, whereas quantitative desorption occurred instantaneously with 5.0 mL of 2 M HNO₃, and selected elements have been determined by using flame atomic absorption spectrometry. Dynamic ranges were 0.04–3.5, 0.1–6.0, 0.04–4.5 and 0.04–4.0 μg/mL for copper, nickel, cobalt and manganese, respectively. The detection limits were 9.2, 28.6, 12.3 and 5.7 ng/mL for Cu(II), Ni(II), Co(II) and Mn(II), respectively. The effects of the experimental parameters, including the sample pH, eluent type, interference ions and breakthrough volume, were studied for separation and preconcentration of Cu(II), Ni(II), Co(II) and Mn(II) ions. Determination of these ions in standard samples confirmed that the proposed method has good accuracy. The proposed method was used for the determination of these ions in water samples.     

DECLINING POTENTIOMETRIC LEVELS IN FORT WALTON BEACH AREA,FLORIDA1

ABSTRACT: The Fort Walton Beach area is presently faced with an excessive drawdown of the potentiometric level in the upper Floridan aquifer. Based on available data, the potentiometric level in the Floridan aquifer has dropped 162 feet since 1936. This declining potentiometric level can lead to problems and possible loss of the natural resource on a long-term basis. However, if corrective measures or programs for proper management of groundwater resources are undertaken at this time, the potential problems may be averted.     

Urban wild meat consumption and trade in central Amazonia

The switch from hunting wild meat for home consumption to supplying more lucrative city markets in Amazonia can adversely affect some game species. Despite this, information on the amounts of wild meat eaten in Amazonian cities is still limited. We estimated wild meat consumption rates in 5 cities in the State of Amazonas in Brazil through 1046 door-to-door household interviews conducted from 2004 to 2012. With these data, we modeled the relationship between wild meat use and a selection of socioeconomic indices. We then scaled up our model to determine the amounts of wild meat likely to be consumed annually in the 62 urban centers in central Amazonia. A total of 80.3% of all interviewees reported consuming wild meat during an average of 29.3 (CI 11.6) days per year. Most wild meat was reported as bought in local markets (80.1%) or hunted by a family member (14.9%). Twenty-one taxa were cited as consumed, mostly mammals (71.6%), followed by reptiles (23.2%) and then birds (5.2%). The declared frequency of wild meat consumption was positively correlated with the proportion of rural population as well as with the per capita gross domestic product of the municipality (administrative divisions) where the cities were seated. We estimated that as much as 10,691 t of wild meat might be consumed annually in the 62 urban centers within central Amazonia, the equivalent of 6.49 kg per person per year. In monetary terms, this amounts to US$21.72 per person per year or US$35.1 million overall, the latter figure is comparable to fish and timber production in the region. Given this magnitude of wild meat trade in central Amazonia, it is fundamental to integrate this activity into the formal economy and actively develop policies that allow the trade of more resilient taxa and restrict trade in species sensitive to hunting.     

Preconcentration of cadmium and copper ions on magnetic core–shell nanoparticles for determination by flame atomic absorption

Magnetic core–shell nanoparticles modified by (3-aminopropyl) trimethoxy silane were prepared and used as adsorbent for the extraction and preconcentration of cadmium and copper ions. The ions were desorbed with nitric acid followed by determination with flame atomic absorption spectrometry. The extraction conditions were investigated systematically. The method was applied for the determination of Cd(II) and Cu(II) ions in different water samples. The accuracy was also evaluated through analysis of certified reference material.     

Effect of biocides on the precipitation of calcium fluoride in the presence of anionic copolymeric inhibitors

The inhibitory efficiency of anionic copolymers and the effect of the biocides sodium hypochlorite, glutaraldehyde, and tris(hydroxymethyl)nitromethane on the precipitation behavior of calcium fluoride (CaF₂) were studied. The efficiency of polymeric inhibitors was traced from conductivity measurements by using half-life (t_1/2) method. X-ray diffraction parameters have been measured for calcium fluoride scale minerals. An anionic copolymer (K-798) acts as one of the best inhibitors for the precipitation process of the calcium fluoride in water as compared to K-775. It is assigned to the fact that the copolymer (K-798) contains both sulfonic acid and sulfonated styrene groups while the polymer (K-775) having only the sulfonic acid group. It was further observed that the biocides have no appreciable effect on the performance of the anionic polymeric inhibitors.     

Estimating abundance: a non parametric mark recapture approach for open and closed systems

We present a novel, non-parametric, frequentist approach for capture-recapture data based on a ratio estimator, which offers several advantages. First, as a non-parametric model, it does not require a known underlying distribution for parameters nor the associated assumptions, eliminating the need for post-hoc corrections or additional modeling to account for heterogeneity and other violated assumptions. Second, the model explicitly deals with dependence of trials by considering trials to be dependent; therefore, cluster sampling is handled naturally and additional adjustments are not necessary. Third, it accounts for ordering, utilizing the fact that a system with a small population will have a greater frequency of recaptures “early” in the survey work compared to an identical system with a larger population. We provide mathematical proof that our estimator attains asymptotic minimum variance under open systems. We apply the model to a data set of bottlenose dolphins (Tursiops truncatus) and compare results to those from classic closed models. We show that the model has an impressive rate of convergence and demonstrate that there’s an inverse relationship between population size and the proportion of the population that need to be sampled, while achieving the same degree of accuracy for abundance estimates. The model is flexible and can apply to ecological situations as well as other situations that lend themselves to capture recapture sampling.