Evaluation of kinetics and mechanism properties of CO2 adsorption onto the palm kernel shell activated carbon

Environmental Science and Pollution Research - The volumetric adsorption kinetics of carbon dioxide (CO2) onto the synthesized palm kernel shell activated carbon via single-stage CO2 activation and...     

Kinetic of formation for single carbon dioxide and mixed carbon dioxide and tetrahydrofuran hydrates in water and sodium chloride aqueous solution

A laboratory-scale reactor system is built and operated to measure the kinetic of formation for single and mixed carbon dioxide–tetrahydrofuran hydrates. The T-cycle method, which is used to collect the kinetic data, is briefly discussed. For single carbon dioxide hydrate, the induction time decreases with the increase of the initial carbon dioxide pressure up to 2.96 MPa. Beyond this pressure, the induction time is becoming relatively constant with the increase of initial carbon dioxide pressure indicating that the liquid phase is completely supersaturated with carbon dioxide. Experimental results show that the inclusion of tetrahydrofuran reduces the induction time required for hydrate formation. These observations indicate hydrate nucleation process and onset growth are more readily to occur in the presence of tetrahydrofuran. In contrast, the presence of sodium chloride prolongs the induction time due to clustering of water molecules with the ions and the salting-out effects. It is also shown that the degree of subcooling required for hydrate formation is affected by the presence of tetrahydrofuran and sodium chloride in the hydrate forming system. The presence of tetrahydrofuran in the hydrate system significantly reduces the amount of carbon dioxide uptake. The apparent rate constant, k, for those systems are reported.     

Cluster analysis of inorganic elements in particulate matter in the air environment of an equatorial urban coastal location

Concentrations of nine inorganic elements (Na, Zn, Ca, Fe, Ni, Mn, Cu, Cd and Al) in particulate matter (PM₁₀) in the air of an equatorial urban coastal location during 2009 were studied during summer and winter monsoon seasons using high-volume sampling techniques. Atomic absorption spectrophotometry was used to analyse the samples. The concentrations of most inorganic elements were higher during summer than winter, except for Cu and Zn. The main inorganic elements in PM₁₀ are Na, Zn and Ca. High concentrations of Na and Ca are due to marine aerosols. Analysis of enrichment factors showed that inorganic elements are from non-crustal sources. Cluster analysis identified five clusters in the summer and six in the winter: (1) PM₁₀–Ni, (2) Zn–Na, (3) Fe–Cu–Ca–Cd, (4) Mn and (5) Al for summer; and (1) PM₁₀, (2) Zn, (3) Fe–Ni, (4) Cu–Ca–Na–Cd, (5) Mn and (6) Al for winter. Combining both correlation and cluster analysis, it was found that Fe–Cu–Cd was from industry/vehicle emissions, Zn was from resuspended soil, Mn was from metallurgical processes, Ni was from a nearby power plant and Al was from crustal sources. Inorganic element concentrations could be a good indicator of local sources of PM₁₀.     

Optimal conditions of Al and Fe extraction from laterite soil using D-optimal design

This paper reports pioneering work in identifying an alternative coagulation agent of wastewater treatment, given the availability of commonly used agents are of a higher cost relative to more natural sources, such as soil. The alternative proposed is laterite soil from northern Malaysia because it contains high amounts of Al and Fe, which are well-known coagulants. The soil was grinded and sieved to obtain uniform particle sizes of <250???m. Al and Fe were extracted from the soil. Extraction agents: (1) HCl, (2) NaOH, and (3) HCl?+?NaCl were chosen. It was found that the most effective agent to extract Fe was 5?N HCl while to extract Al was HCl?+?NaCl, 2 and 4?N, respectively. D-optimal design observed that extraction time t, temperature T, and ratio of amount of laterite soil to amount of extractants r, showed a significant effect on Al extraction. In contrast, the combination of factors t and r exhibited insignificant effect on Fe extraction while other factors were significant. The optimum conditions for extraction of both Al and Fe were 90?°C, 40?min, for r?=?1:15, which gave [Fe]?=?1,870?mg/l and [Al]?=?0.17?mg/l and 90?°C, 90?min, for r?=?1:10, which gave [Fe]?=?2,900?mg/l and [Al]?=?0.130?mg/l. Since concentration of Fe extracted from laterite soil was high, it was concluded that laterite soil can be considered as an alternative and novel source of coagulant applicable in a wastewater treatment coagulation process.     

Upgrading of bio-oil from palm kernel shell by catalytic cracking in the presence of HZSM-5

Upgrading of bio-oil extracted from palm kernel shell (PKS) was performed using a lab-scale fixed-bed reactor with HZSM-5 as a catalyst. The catalytic cracking was carried out at optimized conditions: 0.3-MPa pressure, temperature of 500°C, and oil to catalyst ratio of 1:5. One of the challenges in upgrading bio-oil by catalytic cracking is deactivation of catalyst due to coke formation on catalyst surface. To overcome coke deposition, the upgrading process was carried out at 0.3-MPa pressure. Characterization of raw and upgraded bio-oil obtained through catalytic cracking was discussed in detail, indicating improvement in its physical properties. The distribution of products after cracking of bio-oil includes 58.89 wt% of organic liquid product, 15.63 wt% of aqueous fraction, 7.84 wt% of coke, and 17.64 wt% of gases. The degree of deoxygenation and calorific value of organic liquid product is 43.74% and 31.65 MJ/kg respectively. Organic liquid product obtained comprises 17.55% of hydrocarbons within the gasoline range. Hence, HZSM-5 proved its effectiveness for upgrading the bio-oil in a continuous mode.     

Factors affecting vehicle exhaust emissions,driver motivations as a mediator

Environmental Economics and Policy Studies - Reducing the negative effects of vehicle emissions is one of the main priorities for governments worldwide. Comprehensive understanding of the costs and...