A study of the elemental leachability and retention capability of compost

In this work a comparison is made between the different approaches that can be taken to evaluate the mobility of elements in compost. The practical consequences of the results obtained are also discussed in terms of methods for cleaning up compost and using compost in environmental remediation. The mobility of potentially toxic elements in compost is evaluated by leaching with four selected eluents, i.e. diluted sulfuric acid, oxalate, citrate and EDTA. In contrast to the chelating agents, diluted sulfuric acid was found to generally have a low leaching capability for removal of heavy metals from compost. This implies that the risk of heavy metal leaching caused by natural rainfall is likely to be low. The results obtained in the leaching experiment were compared with previous results obtained from sequential fractionation. This comparison confirmed that both methods gave similar results for predicting the lability of elements in compost. A non-linear regression analysis of the leaching curves was also conducted. The leaching curves for elements with high lability could be fitted with a two components model. The labile components identified by the kinetic model are approximately in accordance with the fractions obtained from the first step of the sequential extraction method. The kinetic speciation method is shown to be a relatively rapid and simple procedure for compost which gives more information about element lability than simple leaching experiments. The leaching reagents used in this work were not effective enough to be used for cleaning up compost with a high metal content. Compost was however shown to have a high affinity for heavy metals, with the order of affinity of metal for the compost being very similar to that seen for humic acid. Compost may therefore prove to be a good remediation material for metal contaminated waste.     

A framework for understanding climate change impacts on coral reef social–ecological systems

Corals and coral-associated species are highly vulnerable to the emerging effects of global climate change. The widespread degradation of coral reefs, which will be accelerated by climate change, jeopardizes the goods and services that tropical nations derive from reef ecosystems. However, climate change impacts to reef social–ecological systems can also be bi-directional. For example, some climate impacts, such as storms and sea level rise, can directly impact societies, with repercussions for how they interact with the environment. This study identifies the multiple impact pathways within coral reef social–ecological systems arising from four key climatic drivers: increased sea surface temperature, severe tropical storms, sea level rise and ocean acidification. We develop a novel framework for investigating climate change impacts in social–ecological systems, which helps to highlight the diverse impacts that must be considered in order to develop a more complete understanding of the impacts of climate change, as well as developing appropriate management actions to mitigate climate change impacts on coral reef and people.     

Kinetics of biochemically driven metal precipitation in synthetic landfill leachate

This study investigates the effectiveness of using metal sulphide and carbonate precipitation mechanisms combined with a landfill‐derived mixed bacterial population. The study was conducted under controlled substrate conditions in anaerobic batch reactors. High chemical oxygen demand (COD):sulphate ratios, butyrate, propionate, and acetate were used anaerobically by bacteria for growth with associated sulphate reduction as well as sulphide and carbonate generation. Propionate and butyrate degradation occurred during sulphate reduction by sulphate‐reducing bacteria while acetate degradation was associated with methanogenesis by methanogenic bacteria. Using low COD, sulphate ratios showed limited acetate utilization, but sulphate reduction still occurred. Precipitation of Cd, Cu, Zn, Ni, and Fe sulphides occurred quickly and was completed in 15 to 30 days, while Ca, Mn, and Mg carbonates formed after 40 to 50 days and some soluble metal remained even after 120 days. The rate of metal precipitation was in the order of Cd>Cu>Zn>Ni>Fe>Mn>Mg>Ca. Bacterially mediated metal precipitation occurred slower than that recognized for chemical precipitation. These findings suggest that contaminant transport models based on chemical equilibrium metal behaviors may over‐predict metal removal by bio‐precipitation. © 2002 Wiley Periodicals, Inc.     

WalkSafe: a school-based pedestrian safety intervention program

OBJECTIVE: To evaluate the effectiveness of the WalkSafe program, an elementary school-based pedestrian safety program in a single high-risk district in Miami-Dade County. METHODS: Sixteen elementary schools were identified in a single high-risk district and enrolled in a one-year study. All schools implemented the WalkSafe program on the last week of January 2003. A pre, post, and three-month post testing of pedestrian safety knowledge was conducted. An observational component was also implemented at four schools that were randomly chosen. Engineering recommendations and law enforcement initiatives were also performed. RESULTS: A total of 6467 children from K-5th grade from 16 elementary schools participated in the program. Of these 5762 tests were collected over three different testing times. A significant difference (p-value < 0.001) was found between the pre and post testing conditions across all grade levels. There was no significant difference found between the post and three-month post testing conditions across all grade levels (p-value > 0.05). The observational data collected at four schools across the different testing times demonstrated a significant difference found between pre and post testing conditions for Group A (stop at the curb and look left, right, left) and also for Group B (midstreet crossing and darting out) (p-value < 0.05). There was no difference found between comparing the pre-test or post-test condition with the three-month post-test time. There were many environmental modifications that were recommended and actually performed. CONCLUSION: The WalkSafe program implemented in a single high-risk district was shown to improve the pedestrian safety knowledge of elementary school children. The observational data demonstrated improved crossing behaviors from pre-test to post-testing conditions. Future research will focus on sustaining the program in this district and expanding the program throughout our county.     

Surface geophysical exploration: developing noninvasive tools to monitor past leaks around Hanford’s tank farms

A characterization program has been developed at Hanford to image past leaks in and around the underground storage tank facilities. The program is based on electrical resistivity, a geophysical technique that maps the distribution of electrical properties of the subsurface. The method was shown to be immediately successful in open areas devoid of underground metallic infrastructure, due to the large contrast in material properties between the highly saline waste and the dry sandy host environment. The results in these areas, confirmed by a limited number of boreholes, demonstrate a tendency for the lateral extent of the underground waste plume to remain within the approximate footprint of the disposal facility. In infrastructure-rich areas, such as tank farms, the conventional application of electrical resistivity using small point-source surface electrodes initially presented a challenge for the resistivity method. The method was then adapted to directly use the buried infrastructure, specifically the steel-cased wells that surround the tanks, as “long” electrodes for both transmission of electrical current and measurements of voltage. Overcoming the drawbacks of the long electrode method has been the focus of our work over the past 7 years. The drawbacks include low vertical resolution and limited lateral coverage. The lateral coverage issue has been improved by supplementing the long electrodes with surface electrodes in areas devoid of infrastructure. The vertical resolution has been increased by developing borehole electrode arrays that can fit within the small-diameter drive casing of a direct push rig. The evolution of the program has led to some exceptional advances in the application of geophysical methods, including logistical deployment of the technology in hazardous areas, development of parallel processing resistivity inversion algorithms, and adapting the processing tools to accommodate electrodes of all shapes and locations. The program is accompanied by a full set of quality assurance procedures that cover the layout of sensors, measurement strategies, and software enhancements while insuring the integrity of stored data. The data have been shown to be useful in identifying previously unknown contaminant sources and defining the footprint of precipitation recharge barriers to retard the movement of existing contamination.     

THE CANADIAN FLOOD DAMAGE REDUCTION PROGRAM

Ad hoc investments in structural flood control measures and continuing high disaster assistance payments by both senior levels of government have often failed to reduce the damage sustained due to floods in Canada. The national Hood Damage Reduction Program, undertaken by the federal government in conjunction with the provinces, has a new comprehensive approach. This joint program emphasizes the non-structural means of reducing flood damages over the long term but also allows for structural measures where these offer the best solution for existing development in the flood plain. The historical and constitutional context, the rationale and details of the program and its success to date are outlined.     

The influence of pH and household plumbing on water lead concentration

The water lead concentrations measured in the homes of children who were part of the Edinburgh Lead study are related to the characteristics of the water supply and the household plumbing. At the time of the study one of the City of Edinburgh's two water supplies was lime treated to reduce plumbosolvency but in the second supply this treatment had not yet become effective. This allows us to estimate the extent to which this type of water treatment reduces water lead concentrations, in houses with lead plumbing, to comply with existing and proposed limits for lead in water. The kitchen cold water was supplied from a lead storage tank in 69 (15%) of the houses. These houses had the highest lead concentrations and water treTo whom correrspondence should be addressed.     

Influence of diesel fuel on seed germination

The use of plant-based systems to remediate contaminated soils has become an area of intense scientific study in recent years and it is apparent that plants which grow well in contaminated soils need to be identified and screened for use in phytoremediation technologies. This study investigated the effect of diesel fuel on germination of selected plant species. Germination response varied greatly with plant species and was species specific, as members of the same plant family showed differential sensitivity to diesel fuel contamination. Differences were also seen within plant subspecies. At relatively low levels of diesel fuel contamination, delayed seed emergence and reduced percentage germination was observed for the majority of plant species investigated. Results suggest the volatile fraction of diesel fuel played an influential role in delaying seed emergence and reducing percentage germination. In addition, the remaining diesel fuel in the soil added to this inhibitory effect on germination by physically impeding water and oxygen transfer between the seed and the surrounding soil environment, thus hindering the germination response.