For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile. 相似文献
Environmental Science and Pollution Research - Landfilling is one of the most prevalent waste management strategies on a global scale. However, one major drawback of landfills is the production of... 相似文献
Laser forming process is used in forming and bending of metallic and non-metallic sheets. Laser beam irradiation causes a localized temperature increase and a localized mechanical strength decrease. In this article, an external mechanical force is added to a laser beam irradiation, which is called external force-assisted laser forming process, to gain a 90-degree bending angle. Furthermore, Numerical simulation of the process is performed to achieve a good understanding of the process. Simulation results show that more than two-third of the final forming is due to the laser beam irradiation. Equivalent plastic strain values during laser forming and external force-assisted laser forming processes are compared. Results show that equivalent plastic strain in laser forming process increases in a step pattern, with increasing in scan pass numbers. This occurs because when the laser beam irradiates on the sheet surface, it reduces the yield strength of the sheet. Equivalent plastic strain in external force-assisted laser forming process has an oscillatory step nature. This attributes to simultaneous effects of strain hardening and thermal induced reduction of yield strength of the sheet. Simulations were in good accordance with experiments. 相似文献
The aim of this study is to investigate the quality and quantity of hospital wastes in Iran. The generated hospital wastes have been estimated by the number of hospitals and the number of active beds in each province of Iran in 2001. All data and information have been gathered from: (i) Iran Statistics Center, (ii) literature review, and (iii) hospital waste investigations for an average hospital. Physical analyses have been conducted in terms of various materials (plastic, textile, paper, metal, and others) and components (biological, infectious, medical, and regular wastes). Based on the above-mentioned investigation and information, a mathematical model has been developed to calculate the generation of (infectious) hospital wastes for any desired year. Utilizing the model, generated infectious hospital wastes has been estimated as 698,937 tones for 2008 (short-term) and 3,494,387 tones for 2028 (long-term period). If the real infectious wastes are collected separately, then the generated infectious wastes will be reduced by 15.1% of the above-mentioned amount (139,787 tones for 2008, and 698,877 tones for 2028). Results of physical analysis show the components of the hospital waste as: (a) infectious, 67.3%; (b) medical, 8.8%; (c) biological, 1.8%; and (d) common municipal wastes, 22.1%. An appropriate collection method requires training the staff at hospitals along with preparation of the required facilities. Of course, both of these requirements are cost intensive. 相似文献
Release of harmful organic intermediates or byproducts during the manufacture of petrochemical compounds is a serious problem in petrochemical plants. In this work, polysulfone membranes blended with GO/TiO2 nanocomposite were synthesized by phase inversion method and coated with a polyamide layer formed by interfacial polymerization to prepare a thin-film composite (TFC) sample. Analysis and characterization of the sample were carried out by XRD, FE-SEM, BET, FTIR/ATR, AFM, TGA, and zeta potential. Results indicated that incorporation of GO/TiO2 into the membrane structure enhanced porosity, surface roughness, and macrovoid formation along the cross-section of the sublayer and permeability of the membrane. The TFC membranes were applied to remove mononitrotoluene (MNT) and dinitrotoluene (DNT) as the basic intermediates of toluene diisocyanate (TDI). The membranes demonstrated high efficiency (>?90%) for the removal of MNT and DNT according to the charge exclusion mechanism and Donnan effect. Application of the TFC membrane for treatment of wastewater in the TDI plant showed that the removal of pollutants is variable in the range of 45–65% and 53–69% for the membrane with the highest flux and highest rejection in different transmembrane pressure, respectively.
Environmental Science and Pollution Research - Fruits are the valuable and important components of human diet. Among them, Prunus persica is a rich source of different minerals and dietary fibers.... 相似文献
The study was carried out to investigate the effects of filler content and two different compatibilizing agents (Eastman G-3003
and G-3216) on the mechanical properties of polypropylene reinforced with corn stalk and wood flour. In the sample preparation,
three levels of filler loading (30, 40 and 50 wt%) and one level of compatibilizing agent content (2.5 wt%) were used. For
overall trend, with addition of both grades of the compatibilizing agents, tensile and flexural properties of the composites
significantly improved, as compared with the pure PP. Tensile and flexural properties reach a maximum at 40 wt% filler content
and gradually decrease with a further increase in wood particle content. The composites treated with G-3003 gave better results
in comparison with G-3216. This could be caused by the high melt viscosity of G-3003. In general, corn stalk flour filled
composites showed superior mechanical properties. 相似文献