The photocatalytic disinfection of urban waste waters

In this paper we present the results of the photocatalytic disinfection of urban waste water. Two microbial groups, total coliforms and Streptococcus faecalis, have been used as indexes to test disinfection efficiencies. Different experimental parameters have been checked, such as the effect of TiO2, solar or UV-lamp light and pH. Disinfection of water samples has been achieved employing both UV-lamp and solar light in agreement with data shown by other authors. The higher disinfection rates obtained employing an UV-lamp may be explained by the stronger incident light intensity. Nevertheless no consistent differences have been found between TiO2-photocatalysis and direct solar or UV-lamp light irradiation at natural sample pH (7.8). At pH 5 the presence of TiO2 increases the relative inactivation rate compared with the absence of the catalyst. After the photocatalytic bacterial inactivation, the later bacterial reappearance was checked for total coliforms at natural pH and pH 5, with and without TiO2. Two h after the photocatalytic treatment, CFU increment was almost nill. But 24 and 48 h later an important bacterial CFU increment was observed. This CFU increment is slower after irradiation with TiO2 at pH 5 in non-air-purged samples.     

Mercury biomethylation assessment in the estuary of Bilbao (North of Spain)

The relationship between the microbial methylation of mercury and the microbial activities in sediments and water collected from the estuary of Bilbao (North of Spain) was studied in three different sampling points and in two different seasons. Three different cultures were prepared with a sediment slurry to distinguish between biotic and abiotic methylation pathways and the variations of the methylmercury concentration and the variations of the population of total number of bacteria (TDC), anaerobic heterotrophic bacteria (AHB), sulphate-reducing bacteria (SRB) and Desulfovibrio were measured. From this work, it can be concluded that the variation of MeHg concentrations is a result of the methylation/demethylation processes in the sediments, and that the abiotic processes have a negligible contribution to those processes. According to the statistical analysis of the results (partial least squares analysis) a significant statistical correlation was established between methylmercury and the SRB counts.     

Analysis of heavy metal distribution in superficial estuarine sediments (estuary of Bilbao, Basque Country) by open-focused microwave-assisted extraction and ICP-OES

Open-focused microwave-assisted extraction and ICP-OES determination of As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn from surface sediments of the estuary of Bilbao (Basque Country, North of Spain) was carried out. All the samples were collected at three different tributaries of the estuary (Asua, Galindo and Nerbioi-Ibaizabal) every two months during 1999. The digestion procedure was proposed from the conclusions of a fractionated factorial design, and the precision and accuracy of the method was verified using a certified reference sediment (RTC008-050). The results of the analysis were statistically treated by means of principal component analysis and correlation analysis. The principal component analysis of sediment data (32 samples × 9 metals) indicated different patterns of contamination regarding the tributary and sampling station. The two main patterns observed were a steady increment of the metal concentration along all the campaigns in the samples collected in the Galindo River and a seasonal variation in the Nerbioi-Ibaizabal River, with higher metallic content during summertime and lower content during wintertime.     

Main results of strategic noise maps and action plans in Navarre (Spain)

According to Directive 2002/49, strategic noise maps and their correspondent action plans were carried out in the Autonomous Community of Navarre, Spain. Six strategic noise maps were produced for 120 km of major roads as well as a strategic noise map for the Agglomeration of the Region of Pamplona (ARP) with a population of 280,199 inhabitants. In the ARP, a total of 36,400 people (13.0 %) are exposed to Ln levels over 55 dBA and 42,300 people (15.1 %) are exposed to Lden levels over 65 dBA. With regard to major roads, a total of 3,900 people are exposed to Ln levels over 55 dBA and 2,400 people are exposed to Lden levels over 65 dBA. When designing action plans, different prioritisation criteria concerning rank-based effectiveness measures (mainly the amount of people benefitting from them) were taken into account.     

Alternative models for environmental management in SMEs: the case of Ekoscan vs. ISO 14001

In the case of SMEs, ISO 14001 and EMAS have been the most used models of reference for implementing Environmental Management Systems (EMSs). Their success has eclipsed that of other alternative SME models deployed in the European Union and Japan. In this paper the authors analyze the content and objectives of one of these models, the Ekoscan model, and compare it to the ISO 14001. Furthermore, a survey composed of 262 participating companies is presented, where motivations, obstacles and benefits of adopting both models in SMEs are compared. The article concludes that only the drivers differ in a significant way, since the perceived obstacles and benefits of adopting the respective models by the SMEs are similar (although their respective signaling and market value are different).     

Interdisciplinary studies on the technical and economic feasibility of deep underground coal gasification with CO<Subscript>2</Subscript> storage in bulgaria

This paper presents the outcome of a feasibility study on underground coal gasification (UCG) combined with direct carbon dioxide (CO₂) capture and storage (CCS) at a selected site in Bulgaria with deep coal seams (>1,200 m). A series of state-of-the-art geological, geo-mechanical, hydrogeological and computational models supported by experimental tests and techno-economical assessments have been developed for the evaluation of UCG-CCS schemes. Research efforts have been focused on the development of site selection requirements for UCG-CCS, estimation of CO₂ storage volumes, review of the practical engineering requirements for developing a commercial UCG-CCS storage site, consideration of drilling and completion issues, and assessments of economic feasibility and environmental impacts of the scheme. In addition, the risks of subsidence and groundwater contamination have been assessed in order to pave the way for a full-scale trial and commercial applications. The current research confirms that cleaner and cheaper energy with reduced emissions can be achieved and the economics are competitive in the future European energy market. However the current research has established that rigorous design and monitor schemes are essential for productivity and safety and the minimisation of the potential environmental impacts. A platform has been established serving to inform policy-makers and aiding strategies devised to alleviate local and global impacts on climate change, while ensuring that energy resources are optimally harnessed.     

Strategic noise map of a major road carried out with two environmental prediction software packages

The main objective of this study is to analyze the differences found in the results of noise mapping using two of the most popular software techniques for the prediction of environmental noise. The location selected to conduct the comparative study is an area encompassed by the ring road that surrounds the city of Pamplona and on a grid, with a total of 6 × 10⁵ points, approximately. In fact, and as the Environmental Noise Directive points out, it is a major road designated by a Member State (Spain). Configuration of the calculation parameters (discretization of the sources, ground absorption, reflection order, etc.) was as equivalent as possible as far as programs allow. In spite of that, a great number of differences appear in the findings. Although in 95.5% of the points the difference in the noise level calculated from the two programs was less than 3 dB, this general statistic result concealed some great differences. These are due to the various algorithms that programs implement to evaluate noise levels. Most differences pertain to highly screened receivers or remote ones. In the former, the algorithm of visibility is the main cause of such differences. In the latter, differences are mainly brought about by a different implementation of the propagation under homogeneous and favorable atmospheric conditions from both software systems.     

The problem of sampling on built heritage: a preliminary study of a new non-invasive method

The relevance of a risk assessment of the built heritage was clearly justified due to the fact that it acts as a pollutant repository and hazardous pollutants have the capacity to penetrate into materials. However, the limitation of the sampling processes due to the high value of the built heritage makes a correct evaluation difficult. For that reason, in the present work, the potential of agar gels as non-invasive samplers of built heritage deterioration products, like crusts and patinas, was evaluated. Different gels of agar and Carbopol® (as control gel) were applied on these built surfaces considering several factors: the treatment time, the effectiveness of the addition of EDTA (ethylenediaminetetraacetic acid, C₁₀H₁₆N₂O₈) and its concentration and the use of a buffer at pH 7.5. All these factors were evaluated in order to determine the capacity of these gels as sampling systems under non-controlled atmospheric conditions. The results obtained in the assays were evaluated by visual examination, by evolution of pH and by the most important techniques used in the risk assessment analysis of the built heritage (Raman spectroscopy, scanning electron microscope (SEM)/energy dispersive X-ray (EDX) and inductively coupled plasma mass spectrometry (ICP-MS)). In this evaluation, the agar gels showed an intrinsic capacity as sampler with respect to the gel Carbopol® and thus, the best option between the studied gels consisted on agar gels with 2 % of EDTA and the longest application time. On the whole, the agar gels showed an interesting potential as non-invasive samplers of built heritage deterioration materials which should be studied more in depth.     

关于新时期师德建设的探索

本文笔者通过回顾历史上优秀的师德观,明确加强新时期师德建设的意义;分析现阶段师德面临的新问题,探讨应如何正视和解决这些问题,以加强新时期师德建设。     

Pattern recognition and classification of sediments according to their metal content using chemometric tools. A case study: the estuary of Nerbioi-Ibaizabal River (Bilbao, Basque Country)

Chemometrics are increasingly used in environmental monitoring studies, but are still far from being accepted as routine tools by field specialists. The multivariate character of usually highly correlated environmental data recommends the use of advanced chemometrics as part of the analytical methodology in order to get information on the basic structure of data. In this work, we have applied a battery of non-supervised (Principal Component Analysis (PCA)) and supervised (k-Nearest Neighbour (k-NN), Soft Independent Modelling of Class Analogies (SIMCA), Linear Discriminant Analysis (LDA) and Artificial Neural Networks (ANNs)) multivariate techniques on a specific environmental dataset. The dataset consists on the concentration of 14 elements (Al, As, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sn, V and Zn) in 95 sediments collected at eight different locations of the estuary of the Nerbioi-Ibaizabal River (Bilbao, Basque Country) during 12 sampling campaigns conducted every 3 months between 2005 and 2008. The study aims to present a simple methodology of general applicability which may result in a flexible and practical tool to assess chemical pollution in sediments of a given specific site.