Distribution and ecological risk of organochlorine pesticides and polychlorinated biphenyls in sediments from the Mediterranean coastal environment of Egypt

Organochlorine contamination in the Mediterranean coastal environment of Egypt was assessed based on 26 surface sediments samples collected from several locations on the Egyptian coast, including harbors, coastal lakes, bays, and estuaries. The distribution and potential ecological risk of contaminants is described. Organochlorine compounds (OCs) were widely distributed in the coastal environment of Egypt. Concentrations of PCBs, DDTs, and chloropyrifos ranged from 0.29 to 377 ng g⁻¹ dw, 0.07 to 81.5 ng g⁻¹ dw, and below the detection limit (DL) to 288 ng g⁻¹ dw, respectively. Other organochlorinated pesticides (OCP) studied were 1–2 orders of magnitude lower. OCP and PCBs had higher concentrations at Burullus Lake, Abu Qir Bay, Alexandria Eastern Harbor, and El Max Bay compared to other sites. OCP and PCB contamination is higher in the vicinity of possible input sources such as shipping, industrial activities and urban areas. PCB congener profiles indicated they were derived from more than one commercially available mixture. The ratios of commercial chlordane and heptachlor metabolites indicate historical usage; however, DDT and HCHs inputs at several locations appear to be from recent usage. The concentrations of PCBs and DDTs are similar to those observed in sediments from coastal areas of the Mediterranean Sea. Ecotoxicological risk from DDTs and PCBs is greatest in Abu Qir Bay, Alexandria Harbor, and El-Max Bay.     

Seasonal variations of aerosol residence time in the lower atmospheric boundary layer

During a one year period, from Jan. 2002 up to Dec. 2002, approximately 130 air samples were analyzed to determine the atmospheric air activity concentrations of short- and long-lived (222Rn) decay products 214Pb and 210Pb. The samples were taken by using a single-filter technique and gamma-spectrometry was applied to determine the activity concentrations. A seasonal fluctuation in the concentration of 214Pb and 210Pb in surface air was observed. The activity concentrations of both radionuclides were observed to be relatively higher during the winter/autumn season than in spring/summer season. The mean activity concentration of 214Pb and 210Pb within the whole year was found to be 1.4+/-0.27 Bq m(-3) and 1.2+/-0.15 mBq m(-3), respectively. Different 210Pb:214Pb activity ratios during the year varied between 1.78 x 10(-4) and 1.6 x 10(-3) with a mean value of 8.9 x 10(-4) +/- 7.6 x 10(-5). From the ratio between the activity concentrations of the radon decay products 214Pb and 210Pb a mean residence time (MRT) of aerosol particles in the atmosphere of about 10.5+/-0.91 d could be estimated. The seasonal variation pattern shows relatively higher values of MRT in spring/summer season than in winter/autumn season. The MRT data together with relative humidity (RH), air temperature (T) and wind speed (WS), were used for a comprehensive regression analysis of its seasonal variation in the atmospheric air.     

Removal of olive mill waste water phenolics using a crude peroxidase extract from onion by-products

Olive mill waste water (OMWW) originating from a two-phase olive oil-producing plant was treated with a crude peroxidase extract prepared from onion solid by-products. The treatments were based on a 3 × 3 factorial design, employing a series of combinations of pH and H₂O₂, in order to identify optimal operational conditions. The treatment performance was assessed by estimating the removal percentage of total polyphenols. The model established produced a satisfactory fitting of the data (R ² = 0.94, p = 0.0158), while the second-order polynomial equation used to describe the process indicated that peroxidase-catalysed polyphenol removal in diluted OMWW is facilitated at relatively low pH and intermediate H₂O₂ values. A predicted value of 50.7 ± 9.5% removal was calculated under optimal operational conditions (pH 2.76, [H₂O₂] = 3.56 mM). Analysis of an untreated and an optimally treated sample by high performance liquid chromatography revealed that enzyme treatment brought about alteration in the original OMWW polyphenolic profile. The use of peroxidase from onion solid by-products is proposed as an alternative means that could have a prospect in bioremediation applications.     

Titania-supported silver-based bimetallic nanoparticles as photocatalysts

Photocatalytic process has shown recently a great potential as an environmental friendly and clean remediation technology for organic pollutants in wastewater. This work described the synthesis of silver-based bimetallic nanoparticles using colloid chemistry and the subsequent immobilization onto titania to form composite photocatalytic materials (titania-supported Ag–Pt nanoparticles). The photocatalysts were characterized by X-ray diffraction, electron microscopy, and nitrogen physisorption. The catalytic activity of the photocatalysts was evaluated by photocatalytic degradation of phenol and 2-chlorophenol (2-CP) in synthetic wastewater solutions. The photocatalytic processes were conducted in a batch photoreactor containing appropriate solutions of phenol and 2-CP with UV irradiation of 450 W. UV-visible spectrophotometer was used for analyzing the concentration of phenol and 2-CP in solutions. Parameters affecting the photocatalytic process such as the solution pH, phenol and 2-CP concentrations, and catalyst concentration were investigated. The results obtained revealed that TiO₂-supported Ag/Pt nanoparticles showed a higher activity for UV-photocatalytic degradation of both phenol and 2-CP pollutants in the solution (as compared to the plain rutile TiO₂). The photodegradation processes were optimized by the 0.5-g/L catalyst with a pollutant concentration of 50 mg/L for all the samples. Complete degradation for both phenol and 2-CP was achieved after 120 min.     

Assessment of persistent toxic substances in the environment of Egypt

The objective of this review is to provide a comprehensive assessment of the threats posed by persistent toxic substances (PTS) to the environment and human health in Egypt and to identify priorities, data gaps and recommendations for future intervention to control, reduce or eliminate releases of PTS. Data on available concentrations of persistent toxic substances in the different environmental compartments and their impacts on the ecosystem, and humans have been assembled and summarized. Despite extensive studies, most of the data available deal with limited studies or hot spot situations. Localized inputs of PTS have been identified from freshwater discharges in coastal areas (e.g., Nile estuaries and coastal lakes) and near sewage outfalls from highly industrialized and populated cities. Data are often missing for certain contaminants and in some compartments and geographical areas. The lack of standardized methodologies makes it difficult to compare and use existing data to provide exact conclusions on spatial and temporal trends. In spite of these restrictions, available data indicate that it is unlikely that present levels of cyclodiene pesticides would adversely affect marine organisms. Compounds which are proven to be of concern are DDT, PCBs, gamma-HCH, PAHs, HCB and organotin compounds. Other compounds are suspected to be ubiquitous but data are lacking. Based on few recent data, the reported levels of organochlorine pesticides in fish and human milk samples suggest a concentration decline during the 1990s consistent with the regulatory restrictions on the use of these compounds. It is essential to activate monitoring programs to fill data gaps in appropriate abiotic and biotic. Monitoring programs should be follow standard procedures and include improved QA/QC protocols.     

A new antidiabetic foot bacteria formula from marine chitosan nanosilver-metal complex

Environmental Science and Pollution Research - In more than two-thirds of the diabetic foot ulcer (DFUs) cases, lower limb amputation of foot ulceration is caused by the infection. The role of...     

Bioaccumulation of organochlorine contaminants in fish species from Lake Qarun,a protected area of Egypt

The purpose of this study was to determine concentrations of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) in Nile tilapia (Oreochromis niloticus) and Bouri fish (Mugil cephalus) from Lake Qarun, a protected area of Egypt, and evaluate the relative ecological risk of these compounds. Different tissues of the fish species were analyzed for 26 chlorinated pesticides and 29 PCB congeners. Total concentrations (µg/kg wet weight, ww) of OCPs ranged between 1487 and 6217 (mean: 3260) and of PCBs between 9.0 and 61 (mean: 34). The trend of detected organochlorine pollutants was: endrin aldehyde > dieldrin > hexachlorobenzene > PCBs > endrin > 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethanes (DDTs). Heptachlor epoxide; oxy-, cis-, and trans-chlordane; trans-nonachlor; β-hexachlorocyclohexane; δ-hexachlorocyclohexane; and endosulfan I and endosulfan sulfate levels were below the detection limit. The ratios of (1,1-dichloro-2,2-bis(p-chlorophenyl)ethylenes [DDEs] + 1,1-dichloro-2,2-bis(p-chlorophenyl)ethanes [DDDs])/ΣDDTs in fish tissues indicated no recent DDT exposure. Concentrations of DDTs and PCBs were generally comparable or higher than those found in studies of similar species worldwide. The concentrations of hexachlorobenzene, dieldrin, and endrin aldehyde in fish muscles exceeded the maximum residue level recommended by various organizations.     

Persistent organochlorine pesticide and PCB residues in surface sediments of Lake Qarun,a protected area of Egypt

Organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) were determined in sediment samples collected from 34 locations in Lake Qarun, Egypt to elucidate their concentrations, distribution, possible sources and potential ecological risk. A total of 25 OCPs and 29 PCBs were identified and quantified. OCPs and PCBs were found to be ubiquitous pollutants in the aquatic environment of Lake Qarun, particular near urban areas reflecting the local usage and input of these pollutants. Total concentrations of OCPs and PCBs in sediments ranged from 1.01 to 164.8 ng g^?1 and 1.48 to 137.2 ng g^?1, respectively. Among OCPs, γ-HCH, heptachlor, aldrin, endrin, p,p′-DDE, oxy-chlordane and endosulfan I and II were the most abundant compounds. The composition of PCB congeners was dominated by the tri-, tetra-, penta- and hexa-chlorinated biphenyls. The ratios of certain metabolites (isomers) to their parent compounds (mixtures) indicated there are still new inputs of lindane, endrin, heptachlor and technical endosulfan to Qarun Lake, while the ratios of (p,p′-DDE + p,p′-DDD)/∑p,p′-DDTs indicate earlier usage of DDT. Contamination levels of PCBs and HCHs can be categorized as moderate to high compared to other urbanized regions worldwide. According to established sediment quality guidelines, γ-HCH, endrin and chlordanes would be more concerned OCP species for the ecotoxicological risk in Lake Qarun.     

Effective photodegradation of methomyl pesticide in concentrated solutions by novel enhancement of the photocatalytic activity of TiO2 using CdSO4 nanoparticles

Annihilation of electrons–holes recombination process is the main remedy to enhance the photocatalytic activity of the semiconductors photocatalysts. Doping of this class of photocatalysts by foreign nanoparticles is usually utilized to create high Schottky barrier that facilitates electron capture. In the literature, because nonpolar nanoparticles (usually pristine metals, e.g., Ag, Pt, Au, etc.) were utilized in the doping process, the corresponding improvement was relatively low. In this study, CdSO₄-doped TiO₂ nanoparticles are introduced as a powerful and reusable photocatalyst for the photocatalytic degradation of methomyl pesticide in concentrated aqueous solutions. The utilized CdSO₄ nanoparticles form polar grains in the TiO₂ matrix due to the electrons leaving characteristic of the sulfate anion. The introduced nanoparticles could successfully eliminate the harmful pesticide under the sunlight radiation within a very short time (less than 1 h), with a removal capacity reaching 1,000 mg pesticide per gram of the introduced photocatalyst. Moreover, increase in the initial concentration of the methomyl did not affect the photocatalytic performance; typically 300, 500, 1,000, and 2,000 mg/l solutions were completely treated within 30, 30, 40, and 60 min, respectively, using 100 mg catalyst. Interestingly, the photocatalytic efficiency was not affected upon multiple use of the photocatalyst. Moreover, negative activation energy was obtained which reveals super activity of the introduced photocatalyst. The distinct photocatalytic activity indicates the complete annihilation of the electrons–holes recombination process and abundant existence of electrons on the catalyst surfaces due to strong electrons capturing the operation of the utilized polar CdSO₄ nanoparticles. The introduced photocatalyst has been prepared using the sol–gel technique. Overall, the simplicity of the synthesizing procedure and the obtained featured photocatalytic activity strongly recommend the introduced nanoparticles to treat the methomyl-containing polluted water.     

Super effective Zn-Fe-doped TiO2 nanofibers as photocatalyst for ammonia borane hydrolysis

In this study, the photocatalytic activity of TiO₂ nanofibers toward ammonia borane hydrolysis has been strongly modified by doping the nanostructure by ZnO and Fe₂O₃ oxides. Due to the differences in the work function and band gap energy among the three semiconductors (TiO₂, ZnO and Fe₂O₃), illumination of TiO₂ leads to accumulate the electrons and holes on the conduction and valance bands of Fe₂O₃ and ZnO, respectively. Accordingly, the experimental results indicated that the surface of the obtained nanofibers is very active which results in an instant hydrolysis of ammonia borane molecules reaching the active zone surrounding the nanofibers. Moreover, negative activation energy was determined as increasing the temperature led to decrease the photocatalytic performance. Furthermore, kinetic studies indicated that the heterogeneous catalytic reaction describing the ammonia borane hydrolysis process is zero order which additionally supports the super activity of the introduced nanofibers. It was also observed that Fe₂O₃ content in the introduced nanofibers has distinct influence as the best performance was obtained at 1 wt%. The modified TiO₂ nanofibers were prepared by calcination of electrospun nanofibers composed of titanium isopropoxide, zinc acetate and iron acetate in air at 700 °C for 1 h. Overall, the present study opens a new avenue to overcome the fast electrons/holes recombination dilemma facing TiO₂-based nanostructures.