The grassroot development planning process: the role of physical planning in the rural environment

The concern of this paper is with the spatial consequences of development in a given rural setting and the way in which physical planning fits into the revival of a dying rural area, particularly in Third World Countries. It is based on experience derived from Dekinal in Benue State, Nigeria and endeavours to define a rural area by briefly discussing its characteristics and highlighting its problems. It proposes a comprehensive development planning process to induce development based on available resources.     

Behavior of a surface applied radionuclide and a dye tracer in structured and repacked soil monoliths

There has been increasing evidence in recent years about the impact of soil structure on vadose zone hydrology and the distribution of surface applied chemical substances. We have carried out a combined dye and radionuclide tracer study on two monoliths from the same location, one structured and one repacked, as part of an ongoing study to investigate the link between preferential flow, leaching of surface applied substances and their distribution within the soil.A tracer solution containing 1300 Bq/L (58)Co and 0.31 micromol/L Sulforhodamine B (SB) was added with roughly constant irrigation during a period of three weeks. The dye served as a tracer for water movement within the soil and thus allowed linkage of the radiotracer ((58)Co) with the flow pattern. Both were monitored in the outflow and measured within profile sections after monolith disassembly. Preferential flow in the structured monolith promoted the bypass and transport of both tracers, although transport was impeded at depths greater than 30 cm by compacted soil and reduced hydraulic conductivity. Eighty four percent of radiocobalt and 8% of SB were found in the upper 4 cm of the structured monolith. The homogenized monolith, on the other hand, showed mostly chromatographic infiltration and a more efficient soil filtering capacity with 91% of radiocobalt and 20% SB residing in the upper 4 cm. Furthermore no tracer was found in the outflow of the homogenized monolith during normal to high irrigation or at greater depth within the monolith. We have related flow characteristics and sorption of radiotracers by quantifying dye distributions and radionuclide activities throughout the profiles. Activities within the flow paths are up to 20-times higher than those measured in the soil matrix, and a fraction of radiocobalt follows the dye tracer in spite of cobalt's low mobility. The dye can thus be used to trace radionuclide distribution within the soil block.     

Removal of Remazol Brilliant Violet-5R dye using periwinkle shells

The purpose of this research is to obtain optimal processing conditions for the adsorption of Remazol Brilliant Violet-5R (RBV-5R) dye onto activated carbon prepared from periwinkle shells (PSAC) by chemical activation with KOH using response surface methodology. Central composite design (CCD) was used to determine the effects of three preparation variables; CO₂ activation temperature, CO₂ activation time and KOH:char impregnation ratio (IR) on two responses; percentage RBV-5R dye removal and PSAC yield. Based on the CCD, two quadratic models were developed for percentage RBV-5R dye removal and PSAC yield, respectively. The most influential factor on each experimental design response was identified from the analysis of variance (ANOVA). The optimum conditions for the adsorption of RBV-5R dye onto PSAC were CO₂ activation temperature of 811 °C, CO₂ activation time of 1.70 h and IR of 3.0, resulting in 81.28% RBV-5R dye removal and 28.18% PSAC yield. PSAC prepared under optimum conditions was mesoporous with a Brunauer–Emmett–Teller surface area of 1894 m²·g^?1, total pore volume of 1.107 cm³·g^?1 and average pore diameter of 2.32 nm. The surface morphology and functional groups of the activated carbon were respectively determined from the scanning electron microscopy and Fourier transform infrared analysis.     

Adsorption of methylene blue onto activated carbon derived from periwinkle shells: kinetics and equilibrium studies

Periwinkle shell, an abundant and inexpensive natural resource, was used to prepare activated carbon by physicochemical activation with potassium hydroxide (KOH) and carbon dioxide (CO₂) as the activating agents at 850 °C for 2 h. The adsorption equilibrium and kinetics of methylene blue dye on such carbon were then examined at 25 °C. Adsorption isotherm of the methylene blue (MB) on the activated carbon was determined and correlated with common isotherm equations. The equilibrium data for methylene blue adsorption well fitted to the Langmuir equation, with maximum monolayer adsorption capacity of 500.00 mg/g. Two simplified kinetic models including pseudo-first-order and pseudo-second-order equation were selected to follow the adsorption processes. The adsorption of methylene blue on activated carbon derived from periwinkle shell could best be described by the pseudo-second-order equation. The kinetic parameters of this best-fit model were calculated and discussed.     

Clustering of the abundance of West Nile virus vector mosquitoes in Peel Region,Ontario, Canada

Understanding the spatial–temporal distribution of vector mosquitoes is essential in designing an efficient mosquito control strategy to reduce the risk of the mosquito-borne disease. In this paper, we apply a non-parametric clustering method, CLUES, to the surveillance data of West Nile virus vector mosquitoes collected by light traps in Peel Region, Ontario, during the mosquito seasons in 2004–2010. In order to obtain robust and reliable results, a statistical smoothing procedure LOWESS is applied to the original time series data. It was found that the mosquito trap sites can be clustered into three groups. The weather impact on the mosquito abundance of each clustered group are similar, while the interannual variability and the highest abundance and peak time in each mosquito season are different. The impact of weather factors on this clustering is investigated.     

An FTIR investigation of isocyanate skin absorption using in vitro guinea pig skin

Isocyanates may cause contact dermatitis, sensitization and asthma. Dermal exposure to aliphatic and aromatic isocyanates can occur in various exposure settings. The fate of isocyanates on skin is an important unanswered question. Do they react and bind to the outer layer of skin or do they penetrate through the epidermis as unreacted compounds? Knowing the kinetics of these processes is important in developing dermal exposure sampling or decontamination strategies, as well as understanding potential health implications such exposure may have. In this paper the residence time of model isocyanates on hairless guinea pig skin was investigated in vitro using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectrometry. Model isocyanates tested were octyl isocyanate, polymeric hexamethylene diisocyanate isocyanurate (pHDI), polymeric isophorone diisocyanate isocyanurate (pIPDI) and methylenediphenyl diisocyanate (MDI). Isocyanates in ethyl acetate (30 microL) were spiked directly on the skin to give 0.2-1.8 micromol NCO cm(-2) (NCO = -N=C=O), and absorbance of the isocyanate group and other chemical groups of the molecule were monitored over time. The ATR-FTIR findings showed that polymeric isocyanates pHDI and pIPDI may remain on the skin as unreacted species for many hours, with only 15-20% of the total isocyanate group disappearing in one hour, while smaller compounds octyl isocyanate and MDI rapidly disappear from the skin surface (80+% in 30 min). Isocyanates most likely leave the skin surface by diffusion predominantly, with minimal reaction with surface proteins. The significance of these findings and their implications for dermal exposure sampling and isocyanate skin decontamination are discussed.     

Identification of best available techniques in the seafood industry: a case study

A Best Available Techniques (BAT) analysis of a mussel canning processing facility in northwest Spain was undertaken to investigate potential cleaner production and efficiency improvements. Potential techniques were identified from the literature and from our experience in the seafood sector. BATs were then assessed for possible implementation in a mussel canning facility. This work describes, in considerable detail, the advantages and disadvantages of the techniques discussed.