Antimony distribution and mobility in topsoils and plants (Cytisus striatus, Cistus ladanifer and Dittrichia viscosa) from polluted Sb-mining areas in Extremadura (Spain)

A study about topsoil antimony distribution and mobility from the soils to the biomass has been afforded in three abandoned Sb mining areas located at Extremadura. Physico-chemical characteristics of the soils and total antimony levels were measured in soils and autochthonous plant species (Cytisus striatus, Cistus ladanifer and Dittrichia viscosa). Comparison with corresponding values in reference areas isolated from the mining activities is discussed. Antimony mobility in the soils was estimated by measuring the water extractable fraction; low results were obtained for the three soil areas, with no statistical differences. Plant ability to accumulate antimony was estimated by use of plant accumulation coefficients (PAC). Seasonal (spring vs. autumn) effects on the antimony content in the plant species. Cytisus striatus from Mari Rosa mine presented antimony excluder characteristics, whereas Dittrichia viscosa specimens growing in San Antonio mine showed a significant antimony bioaccumulation.     

Evaluating the sustainability of a regional system using Fisher information in the San Luis Basin, Colorado

This paper describes the theory, data, and methodology necessary for using Fisher information to assess the sustainability of the San Luis Basin (SLB) regional system over time. Fisher information was originally developed as a measure of the information content in data and is an important method in information theory. Our adaptation of Fisher information provides a means of monitoring the variables of a system to characterize dynamic order, and, therefore, its regimes and regime shifts. This work is part of the SLB Sustainability Metrics Project, which aimed to evaluate movement over time towards or away from regional sustainability. One of the key goals of this project was to use readily available data to assess the sustainability of the system including its environmental, social and economic aspects. For this study, Fisher information was calculated for fifty-three variables which characterize the consumption of food and energy, agricultural production, environmental characteristics, demographic properties and changes in land use for the SLB system from 1980 to 2005. Our analysis revealed that while the system displayed small changes in dynamic order over time with a slight decreasing trend near the end of the period, there is no indication of a regime shift. Therefore, the SLB system is stable with very slight movement away from sustainability in more recent years.     

Process design for the environment: A multi-objective framework under uncertainty

Designing chemical processes for the environment requires consideration of several indexes of environmental impact including ozone depletion, global warming potentials, human and aquatic toxicity, photochemical oxidation, and acid rain potentials. Current methodologies, such as the generalized waste reduction algorithm (WAR), provide a first step towards evaluating these impacts. However, to address the issues of accuracy and the relative weights of these impact indexes, one must consider the problem of uncertainties. Environmental impacts must also be weighted and balanced against other concerns, such as their cost and long-term sustainability. These multiple, often conflicting, goals pose a challenging and complex optimization problem, requiring multi-objective optimization under uncertainty. This paper will address the problem of quantifying and analyzing the various objectives involved in process design for the environment. Towards this goal, we proposed a novel multi-objective optimization framework under uncertainty. This framework is based on new and efficient algorithms for multi-objective optimization and for uncertainty analysis. This approach finds a set of potentially optimal designs where trade-offs can be explicitly identified, unlike cost-benefit analysis, which deals with multiple objectives by identifying a single fundamental objective and then converting all the other objectives into this single currency. A benchmark process for hydrodealkylation (HDA) of toluene to produce benzene modeled in the ASPEN simulator is used to illustrate the usefulness of the approach in finding environmentally friendly and cost-effective designs under uncertainty.     

Interaction of North Brazil Current rings with the Lesser Antilles Arc and Barbados Island: laboratory experiments and observations

The interaction of North Brazil Current (NBC) rings with the Lesser Antilles Arc (LAA) and the Barbados Island (BI) is addressed by experimental modeling and observations. Our results compare well with previous experimental results and numerical simulations. Several sizes, intensities and two different vorticity profiles (non-isolated and initially isolated vortices) were tested. Three regimes were found namely: (1) the vortex surrounds the BI and its translational motion (TM) stops North of BI; (2) the vortex passes through the corridor between the LAA and the BI by reducing its size; and (3) The vortex stopped at the entrance to the corridor South of the BI. Isolated vortices were prone to stopped North of the BI. Apparently the intensity in the outer vorticity ring has an influence on the fate of the NBC ring. Non-isolated vortices can also stop its TM North of the BI because when in \(\beta\) plane they develop an outer ring similar to the isolated vortices. From these results we conclude that intense and big NBC rings are likely to stop its TM North of the BI. Medium and moderate vortices stops its TM South of the BI and they reduce their size until they are able to pass through the corridor between the LAA and the BI. Mild vortices of all sizes stop South of the corridor, close to the BI and the LAA. Drifter trajectories and Sea Surface Height altimetry confirm the results.     

Recent Changes in the Riparian Forest of a Large Regulated Mediterranean River: Implications for Management

The structure of the floodplain forests of the Middle Ebro River (NE Spain) was examined at patch and landscape scales along a three-step chronosequence defined according to the extent of flow regulation-induced hydrogeomorphic changes, with the ultimate purpose of producing baseline information to guide through management and restoration plans. At patch scale, a total of 6,891 stems within 39 plots were registered for species, diameter and health status. The stem density, size class distribution, canopy dieback and mortality were further compared by means of non-parametric tests. At landscape scale, the temporal evolution of the area occupied by forest stands of different ages in the floodplain along the chronosequence was evaluated using four sets of aerial photographs dated in 1927, 1957, 1981 and 2003. The within-patch structure of pioneer forests (<25–30 years old) was characterized by dense and healthy populations of pioneer species (Populus nigra, Salix alba and Tamarix spp.), but the area occupied by these forest types has progressively decreased (up to 37%) since the intensification of river regulation (ca. 1957). In contrast, non-pioneer forests (>25–30 years old) were characterized by declining and sparse P. nigra–S. alba–Tamarix spp. stands, where late-seral species such as Ulmus minor and Fraxinus angustifolia were frequent, but only as small-size stems. At landscape scale, these type of senescent forests have doubled their surface after river regulation was intensified. Populus alba only appeared in the oldest plots recorded (colonized before 1957), suggesting sexual regeneration failure during the last five decades, but usually as healthy and dense stands. Based on these findings, measures principally aimed at recovering some hydrogeomorphic dynamism are recommended to guarantee the self-sustainability of the floodplain forest ecosystem.     

Volatile Organic Compounds in the Area of Madrid: A Chemometrical Approach

Multivariate techniques have been applied to the set of dataobtained after one year sampling of volatile organic compounds(VOCs), including volatile aldehydes in the area of Madrid inorder to evaluate the possible correspondence among groups ofanalysed compounds, as far as modelling of different emissionsources in relation to location and season. The measurements were carried out at four sites in Madrid, characteristic for urban and suburban areas. Additionally, as reference, a rural area 100 km far from the city was considered. Results of correlation analysis, factor and cluster analysis are presented.Higher correlations were found between variables related withtraffic emissions. Factor analysis results showed two mainsignificant variables related to anthropogenic and biogenicemissions respectively. In relation to cluster analysis, samples were grouped according to sampling site and seasonal variations.     

Relative Assessment of Indicators in Sustainability Enhancement (RAISE): a first approach in the manufacturing stage of products

The estimation of the sustainability performance of products requires tools to provide systematic approaches to the definition of impacts, indicators and comparative scenarios from early design stages. This paper illustrates the Relative Assessment of Indicators in Sustainability Enhancement (RAISE) methodology that is based on the measure of negative impacts generated during any product life cycle stage. This approach includes a systematic process for the definition and evaluation of indicators to compare the sustainability performance of products considering each indicator individually and using a holistic index of sustainability to entail an overall comparison between products from manufacturing scenarios. The RAISE method is developed with the aim of assessing sustainability performance of product life cycle stages and incorporating this assessment into the decision-making process when comparing different manufacturing scenarios. A guitar capo manufactured in polymeric material is used as case study to demonstrate the use of the method. In this paper, only the manufacturing stage is considered; however, the method can also be employed in other stages of the life cycle.