Cathode ray tube glass recycling: an example of clean technology.

In this study the use of 'cleaned' end of life (EOL) cathode ray tube (CRT) glass as a raw material in ceramic glazes is described. At present, the recycling and industrial utilization of CRT, a glass material from TV and computer sets, is a subject of intense research with particular regard to the so-called open-loop recycling, namely cycles different from that of the origin. However, the use of CRT glass as a secondary raw material is strictly related to the demand of high-quality raw material. The good preliminary results reached by introducing clean TV and PC monitor panel and cone glass into ceramic glaze formulations pushed research toward the setting-up of a base glaze that is exploitable for the production of pigmented, silk-screened and flame-hardened glazes (products used industrially for coating floor tiles). The aesthetic and chemical characterization of the tiles glazed by this product showed an extremely similar behaviour to originals that did not contain CRT glass. The good technical results achieved have been supported by the life cycle assessment analysis, which has demonstrated a reduction of the environmental impact of the CRT glass-containing ceramic glaze with respect to the standard one.     

Sustainability considerations in remediation,retrofit, and seismic upgrading of historic masonry structures

This paper addresses the problem of sustainability in remediation, retrofit, and seismic upgrading of historic masonry structures. Different rehabilitation techniques and some successful applications throughout the Balkans and Italy are described, with particular emphasis to the shear reinforcement of wall panels. The selected techniques aim at improving the seismic performance, preserving the structures for future generations, having the least impact in altering the architectural and heritage values, as well as being sustainable, in terms of reduced carbon dioxide emissions, reversibility, and low energy consumption. The use of cross-laminated timber (CLT), natural fibers, and fiber-reinforced Polymers (FRP) jacketing with natural lime coatings are discussed. The paper concludes by summarizing key successes of the proposed rehabilitation solutions in conservation engineering and suggests areas in which these could be used with great advantage.

     

Use of municipal incinerator bottom ash as sintering promoter in industrial ceramics

The use of glassy frits obtained from municipal incinerator bottom ash and glass cullet, as sintering promoters in the production process of porcelainized stoneware, was investigated. The emphasis was on studying the similarities and differences with respect to the standard body. The characterization involved the application of several techniques: chemical analysis, X-ray powder diffraction, linear shrinkage during firing, water absorption, bending strength and spot resistance test. The results show that, the addition of these glassy frits in the body improve the characteristics of water absorption and spot resistance which is related to the absence of surface porosity originated by the glassy phase. Moreover, addition of glassy frits to the porcelanized stoneware body does not change significantly its bending strength. In the firing conditions used there is a slight worsening in the tiles planarity, while there is a significant modification of the color, which becomes darker with respect to the base body.     

Chemical stability of geopolymers containing municipal solid waste incinerator fly ash

Municipal solid waste incinerators every year produce tons of fly ashes which, differently from coal fly ashes, contain large amounts of toxic substances (heavy metals, dioxins, furans). The stabilization/solidification (S/S) technology known as geopolymerization is proposed with the purpose to bond physically and chemically incinerator fly ashes (IFA) in a solid matrix, in order to reduce pollutant mobility. The chemical stability of geopolymers with Si/Al ratio of 1.8–1.9 and Na/Al ratio of 1.0, synthesized by alkali activation of metakaolin and the addition of 20 wt% of two different kinds of IFA, is presented. The concentration of the alkaline solution, water to solid ratio and curing process have been optimized. The room temperature consolidation of IFA containing geopolymers has been tested for leachability in water for 1 day, accordingly to EN 12457 regulation and extended to 7 days to increase the water attack on solid granules. Leachable metals in the test solution, determined by ICP_AES, fall within limit values set by regulation for non-dangerous waste landfill disposal. Geopolymeric matrix evolution with leaching time has been also evaluated in terms of pH and electrical conductivity increase in solution.     

Glass-ceramics obtained by the recycling of end of life cathode ray tubes glasses

This work is concerned with open-loop recycling of end of life Cathode Ray Tubes glass (an unsolved problem when considering that in Europe almost 90% of EOL electronic goods is disposed of in landfills), focusing on the development of glass-ceramics from panel or funnel glass with dolomite and alumina, and the evaluation of the tendency towards crystallisation with particular attention on composition and thermal treatment. Glasses were melted at a temperature of about 1500 degrees C and transformed into glass-ceramics by different thermal treatments (900 degrees C to approximately 1100 degrees C temperature range and 0.5 to approximately 8h soaking time). By using the evaluation of thermal, mineralogical and microstructural data it has been pointed out that a good degree of crystallisation is reached at about 1000 degrees C and with a high proportion of waste glass (50-75%) if 40-45% of CaO and MgO bearer (dolomite) is introduced. In this way alkaline and alkaline-earth silicate and aluminosilicate mainly develop probably with a surface mechanism.