Atmospheric CO2 consumption by rock weathering over a five year period in a large non-perennial tropical river basin of southern India

Environmental Science and Pollution Research - Rivers engage in carbon cycle by transporting the dissolved products of weathering of rocks to the oceans, and this process is sensitive to the global...     

Distribution of Iron, Manganese, Zinc and Atrazine in Groundwater in Parts of Palar and Cheyyar River Basins, South India

A study was carried out in a part of Palar and Cheyyar river basin to evaluate the current status of iron, manganese, zinc and atrazine concentrations, their origin and distribution in groundwater. Groundwater samples were collected during post-monsoon (March 1998 and February 1999) and pre-monsoon (June 1999) periods from 41 sampling wells distributed throughout the study area. The groundwater samples were analyzed for trace metals using AAS and atrazine using HPLC. The concentration of the trace elements in groundwater is predominant during pre-monsoon period. Distribution pattern indicates that the concentration of these elements increases from west to northeast and towards Palar river. Lower concentrations in the central part may be due to recharge of fresh water from the lakes located here. During most of the months, as there is no flow in Palar river, the concentrations of trace elements in groundwater are high. Drinking water standards indicate that Mn and Zn cross the permissible limit recommended by EPA during the pre-monsoon period. A comparison of groundwater data with trace element chemistry of rock samples shows the abundance of trace elements both in the rock and water in the order of Fe > Mn > Zn and Fe > Zn > Mn. This indicates that iron in groundwater is derived from lithogenic origin. Further, Fe, Mn and Zn have good correlation in rock samples, while it is reverse in the case of water samples, indicating the non-lithogenic origin of Mn and Zn. Atrazine (a herbicide) was not detected in any of the groundwater samples in the study area, perhaps due to low-application rate and adsorption in the soil materials.     

Fluoride in weathered rock aquifers of southern India: Managed Aquifer Recharge for mitigation

Climatic condition, geology, and geochemical processes in an area play a major role on groundwater quality. Impact of these on the fluoride content of groundwater was studied in three regions—part of Nalgonda district in Telangana, Pambar River basin, and Vaniyar River basin in Tamil Nadu, southern India, which experience semi-arid climate and are predominantly made of Precambrian rocks. High concentration of fluoride in groundwater above 4 mg/l was recorded. Human exposure dose for fluoride through groundwater was higher in Nalgonda than the other areas. With evaporation and rainfall being one of the major contributors for high fluoride apart from the weathering of fluoride rich minerals from rocks, the effect of increase in groundwater level on fluoride concentration was studied. This study reveals that groundwater in shallow environment of all three regions shows dilution effect due to rainfall recharge. Suitable managed aquifer recharge (MAR) methods can be adopted to dilute the fluoride rich groundwater in such regions which is explained with two case studies. However, in deep groundwater, increase in fluoride concentration with increase in groundwater level due to leaching of fluoride rich salts from the unsaturated zone was observed. Occurrence of fluoride above 1.5 mg/l was more in areas with deeper groundwater environment. Hence, practicing MAR in these regions will increase the fluoride content in groundwater and so physical or chemical treatment has to be adopted. This study brought out the fact that MAR cannot be practiced in all regions for dilution of ions in groundwater and that it is essential to analyze the fluctuation in groundwater level and the fluoride content before suggesting it as a suitable solution. Also, this study emphasizes that long-term monitoring of these factors is an important criterion for choosing the recharge areas.     

Computation of groundwater resources and recharge in Chithar River Basin, South India

Groundwater recharge and available groundwater resources in Chithar River basin, Tamil Nadu, India spread over an area of 1,722 km² have been estimated by considering various hydrological, geological, and hydrogeological parameters, such as rainfall infiltration, drainage, geomorphic units, land use, rock types, depth of weathered and fractured zones, nature of soil, water level fluctuation, saturated thickness of aquifer, and groundwater abstraction. The digital ground elevation models indicate that the regional slope of the basin is towards east. The Proterozoic (Post-Archaean) basement of the study area consists of quartzite, calc-granulite, crystalline limestone, charnockite, and biotite gneiss with or without garnet. Three major soil types were identified namely, black cotton, deep red, and red sandy soils. The rainfall intensity gradually decreases from west to east. Groundwater occurs under water table conditions in the weathered zone and fluctuates between 0 and 25 m. The water table gains maximum during January after northeast monsoon and attains low during October. Groundwater abstraction for domestic/stock and irrigational needs in Chithar River basin has been estimated as 148.84 MCM (million m³). Groundwater recharge due to monsoon rainfall infiltration has been estimated as 170.05 MCM based on the water level rise during monsoon period. It is also estimated as 173.9 MCM using rainfall infiltration factor. An amount of 53.8 MCM of water is contributed to groundwater from surface water bodies. Recharge of groundwater due to return flow from irrigation has been computed as 147.6 MCM. The static groundwater reserve in Chithar River basin is estimated as 466.66 MCM and the dynamic reserve is about 187.7 MCM. In the present scenario, the aquifer is under safe condition for extraction of groundwater for domestic and irrigation purposes. If the existing water bodies are maintained properly, the extraction rate can be increased in future about 10 % to 15 %.     

Integrated process approach for degradation of p-cresol pollutant under photocatalytic reactor using activated carbon/TiO2 nanocomposite: application in wastewater treatment

Environmental Science and Pollution Research - Over the years, biodegradation has been an effective technique for waste water treatment; however, it has its own limitations. In order to achieve a...     

Groundwater quality and its suitability for domestic and agricultural use in Tondiar river basin,Tamil Nadu,India

Assessment of suitability of groundwater for domestic and agricultural purposes was carried out in Tondiar river basin, Tamil Nadu, India. The study area covers an area of 315 km² and lies in a semiarid region. Groundwater is the major source for domestic and agricultural activity in this area. Groundwater samples were collected from 45 wells during pre-monsoon and post-monsoon period in the year 2006. The water samples were analysed for physical and chemical characteristics. Suitability of groundwater for irrigation was evaluated based on salinity hazard, sodium percent, sodium adsorption ratio, residual sodium carbonate, US salinity diagram, Wilcox’s diagram, Kelly’s ratio and permeability index. Ca-HCO₃, mixed Ca–Mg–Cl and Na–Cl were the dominant groundwater types. High hardness and electrical conductivity in this area makes the groundwater unsuitable for drinking and agricultural purposes. Concentration of trace elements (Mn, Cu, Zn, Pb and Ni) did not exceed the permissible limit for drinking and agricultural purposes. Majority of the groundwater samples were unsuitable for domestic and agricultural purposes except for 31% and 36%, which were suitable for drinking and irrigation purposes, respectively.     

Long-term exposure to chromium contaminated waters and the associated human health risk in a highly contaminated industrialised region

Environmental Science and Pollution Research - Disposal of industrial waste is of great concern because it releases toxic metals resulting into the degradation of environments and consequently...     

Groundwater geochemistry and identification of hydrogeochemical processes in a hard rock region, Southern India

Hydrogeochemical investigations were carried out in Chithar River basin, Tamil Nadu, India to identify the major geochemical processes that regulate groundwater chemistry. For this study, long-term (1991–1997) and recent water quality data (2001–2002) for 30 groundwater wells spread over the study area were used to understand the groundwater geochemistry and hydrogeochemical process regulating groundwater quality. Groundwater quality data obtained from more than 400 water samples were employed. Results of electrical conductivity and chloride express large variation between minimum and maximum values and high standard deviation, which suggests that the water chemistry in the study region is not homogeneous and influenced by complex contamination sources and geochemical process. Nitrate and depth to water table expose the influences of surface contamination sources, whereas dissolved silica, fluoride and alkalinity strongly suggest the effect of rock–water interaction. In the study region, weathering of carbonate and silicate minerals and ion exchange reactions predominantly regulate major ion chemistry. Besides, the concentrations of sulphate, chloride and nitrate firmly suggest the impact of agricultural activities such as irrigation return flow, fertiliser application, etc on water chemistry in the study region.     

Formulation and Characterization of Biodegradable Packaging Film Derived from Potato Starch &; LDPE Grafted with Maleic Anhydride—LDPE Composition

There is a paradigm shift from non renewal resources to renewable resources in view of problems of disposal of plastic products after their life cycle. This paper deals with the approach, preparation and product properties of polymer prepared by using polysaccharide based biodegradable polymer. Basic material has been prepared by mixing LDPE, LDPE-g-mA (LDPE grafted with (0.5%) maleic anhydride (1:1)) containing a polar group in the LDPE backbone. Prepared basic material has been compounded in twin screw extruder with 0, 2.5, 5.0, 7.5, 10.0, 12.5 & 15% of Potato Starch. Thereafter, after conditioning blown film samples were prepared using extrusion film blowing technique, under temperature profile ranging from 120 to 160 °C. Packaging films have been prepared with maximum 15% potato starch contents and have been characterized by FTIR, DSC, TGA, and XRD techniques to ascertain its impact on some structural and thermal properties like thermal stability, flexibility, crystallinity, crystal size etc.