Evaluation of a fast wastewater odour characterisation procedure using a chemical sensor array

Sewage treatment works are one of the major sources that cause atmospheric odour pollution. The increase in the number of complaints about odour nuisance is due to the increase in environmental concerns. Unfortunately, the legislation on odour nuisance from sewage treatment works is very limited. In order to determine suitable thresholds on which to base legal standards, reliable and efficient odour measurement methods need to be defined. A chemical sensor array was developed for the purpose of measuring wastewater odour. This paper describes the development of the chemical sensor system which is specifically tuned to odours of wastewater origin and which can give an electronic measure of the wastewater odours. Odour emissions from a wastewater treatment facility were detected by using a quartz crystal microbalance (QCM) sensor array. The array consists of nine sensor elements, which were coated with different materials. In this paper, the usage of these novel instruments in the water industry was shown.     

Evaluation of ecological risk,source, and spatial distribution of some heavy metals in marine sediments in the Middle and Eastern Black Sea region,Turkey

Environmental Science and Pollution Research - In the present study, the concentration levels of heavy metals such as Mn, Fe, Ni, Cu, Zn, Cr, and Pb in sediment samples collected from 16 sampling...     

Strength and durability characterization of pelletized coal–biomass household briquettes

Increase in waste sludge disposal is always seen as a problem from the point of production industry. However, it is clear that the reuse and recycle of sewage sludge could be a serious economic input. The most important action should be to determine the sludge characterizations and direct the producers towards appropriate reuse and recycling opportunities. In this study, reuse method was examined to produce coal briquette, which will constitute an example for waste sludge. In order to make use of the waste sludge, five different coal briquette samples were produced by mixing powdered coal and bitumen together with waste sludge, at different ratios. The overall results indicated that the sample named CB3 having 70% powdered coal, 20% waste sludge, and 10% bitumen was found to be the optimum coal briquette among the other samples produced. The proximate analysis of the optimum briquette sample was carried out according to the Turkish standards and regulations and it was found out that the produced briquette coal can have commercial value with a gross calorific value of 30.03 MJ/kg and 7.30% ash content.     

Cationic dye adsorption onto natural and synthetic zeolites in the presence of Cs+ and Sr2+ ions

Adsorption of diazine dye safranine O (SO) in the presence of Cs⁺ and Sr²⁺ ions was investigated onto natural and synthetic zeolites in order to predict competition of cationic organic species with their radionuclides, which are the main fission products released into the environment. Adsorption of SO was measured up to the 40th day and the surface-diffusion coefficients (D_s) were estimated by applying Nernst–Planck approximation based on a homogeneous-surface-diffusion model. The values of D_s were 10 times higher on natural zeolite than those of synthesized zeolite from fly ash (FA) under hydrothermal conditions. Similarly, distribution coefficients (K_D) were considerably higher on the clinoptilolite-type natural zeolite. The zeolitized product of FA is mainly composed of analcime and sodalite. SO adsorption on natural zeolite was not influenced by Cs⁺ and Sr²⁺ ions, but it decreased at high concentrations on synthetic zeolite. The higher influence of the Sr²⁺ ions on SO⁺ adsorption showed that they compete with each other for the same adsorption sites. These results suggested that natural zeolite cannot be used for remediation of wastewater polluted with Cs and Sr radionuclides in the presence of organic cations, whilst FA zeolite has a potential for Sr removal.     

Land cover changes on the coastal zone of Candarli Bay, Turkey using remotely sensed data

Land cover of the Earth is changing dramatically because of human activities. Information about changes is useful for management of natural resources. Rapid land cover changes have taken place in many coastal areas of Turkey over the last two decades due to urbanization and land degradation. In this paper, land cover change dynamics were investigated by the combined use of satellite remote sensing and geographical information systems. The main objective of the study was to determine land-cover transition rates among land cover types in coastal areas of Turkey. A time series of Landsat TM and ASTER images were used to gather land cover change data of the coastal line of Candarli Bay, Izmir, Turkey. The images were classified using supervised classification and a post-classification comparison approach was used in change detection. The results show significant increase in urban areas but decrease in semi natural and agricultural areas.     

Assessing different sources of uncertainty in hydrological projections of high and low flows: case study for Omerli Basin,Istanbul, Turkey

This study investigates the assessment of uncertainty contribution in projected changes of high and low flows from parameterization of a hydrological model and inputs of ensemble regional climate models (RCM). An ensemble of climate projections including 15 global circulation model (GCM)/RCM combinations and two bias corrections (change factor (CF) and bias correction in mean (BC)) was used to generate streamflow series for a reference and future period using the Hydrologiska Byråns Vattenbalansavdelning (HBV) model with the 25 best-fit parameter sets based on four objective functions. The occurrence time of high flows is also assessed through seasonality index calculation. Results indicated that the inputs of hydrological model from ensemble climate models accounts for greater contribution to the uncertainty related to projected changes in high flows comparing to the contribution from hydrological model parameterization. However, the uncertainty contribution is opposite for low flows, particularly for CF method. Both CF and BC increases the total mean variance of high and low flows. The variability in the occurrence time of high flows through RCMs is greater than the variability resulted from hydrological model parameters with and without statistical downscaling. The CF provides more accurate timing than BC and it shows the most pronounced changes in flood seasonality.     

Cost analysis of alternative methods for wastewater handling in small communities

Wastewater collection and treatment is quite important for sustainable management. It would be uneconomical and impractical to provide sewer systems and separate wastewater treatment plants (WWTP) for small communities. The decision process in wastewater planning is rather important in terms of comparing the alternatives considered. The two important points in the management of wastewater at rural areas not connected to a sewer system are to develop an optimized operation strategy and to make sure that the complete system is environmentally and economically sustainable. In some regions, package treatment could be an alternative solution. However, in cases where there is an existing large WWTP, a cluster system, where sewage generated by small communities could be transported via conveyors to a centralized WWTP, could be employed. In this study, the wastewater treatment and disposal problems in small communities were addressed and an alternative wastewater handling scenario was proposed. Additionally, three wastewater handling scenarios were compared. As a case study, Gebze villages were selected.     

Investigation of the blood biochemical status of gas station workers

The aim of this study was to examine occupation-associated effects on blood cytokine and immunoglobulin g (IgG) levels, antioxidant enzyme activities (SOD, GSHPx, and catalase), nitrite and nitrate levels, and malondialdehyde (MDA) concentrations in gas station workers (GSWs). Trace elements (Cu, Zn, and Pb) in serum, and the amount of hemoglobin in erythrocytes were also determined. Forty male GSWs and 30 male controls were included in the study. No significant difference was observed between the hemoglobin levels of GSWs and those in controls. Proinflammatory cytokine levels, such as tumor necrosis factor-α and interleukin-8 were significantly increased in GSWs’ sera. Interleukin-1β and interleukin-6 were below the detection limit of the assay in both the groups. Cytokine receptor interleukin 2R concentration and IgG levels were also significantly increased. Approximately, two-fold increase in nitrite and nitrate concentrations was found in GSWs’ sera. Erythrocyte antioxidant enzyme levels were significantly lower in GSWs’ blood. MDA concentration, a measure of lipid peroxidation, was found to be significantly elevated. Zn levels were significantly decreased, whereas Cu and Pb levels were increased in GSWs’ sera. Smoking was not found to be a major confounder for the association between exposure and blood parameters.     

Sequential (anaerobic/aerobic) biological treatment of Dalaman SEKA Pulp and Paper Industry effluent

In the pulp and paper industry, lignin and other color compounds are removed by chemical agents in bleaching process. Use of chlorine-based agents results in production of degradation products which include various chloro-organic derivatives. Since these new compounds are highly chlorinated, they cause a problem in the treatment of pulp and paper industry wastewaters. Chemical precipitation, lagooning, activated sludge, and anaerobic treatment are the processes used for treating pulp and paper effluents. Furthermore, a combination of these processes is also applicable. In this study, the effluent of Dalaman SEKA Pulp and Paper Industry was examined for its toxic effects on anaerobic microorganisms by anaerobic toxicity assay. Additionally, this wastewater was applied to a sequential biotreatment process consisting of an upflow anaerobic sludge blanket as the anaerobic stage and a once-through completely mixed stirred tank as the aerobic stage. Results indicated that: (1) Dalaman SEKA Pulp and Paper Industry wastewater exerted no inhibitory effects on the anaerobic cultures under the studied conditions, and (2) application of a sequential biological (anaerobic/aerobic) system to treat the Dalaman SEKA Pulp and Paper Industry wastewater resulted in approximately 91% COD and 58% AOX removals at a HRT of 5 and 6.54 h for anaerobic and aerobic, respectively.