Unionists/researchers writing a book in co-operation: Importance in training/research dynamics

This text describes two different experiences of co-operation between unionists and researchers that resulted in writing of a book. We emphasize their similarities and differences and discuss the importance of these experiences in the dynamics of research and training in Ergonomics.     

巴西圣保罗州莫日-瓜苏河流流域中的汞:根据210Pb测年剖面估计的沿海泻湖与河流贡献之间的联系

引言 莫日-瓜苏河位于纳斯吉拉斯州,海拔高1450m.流淌470km后,该河流注入圣保罗州的帕尔杜河.其流域总面积为1400km2,其中有86%位于圣保罗州,包括一个工业化地区[1].     

Evaluation of boron removal from water by hydrotalcite-like compounds

Layered double hydroxides (LDHs) or hydrotalcite (HT)-like compounds with different kinds of metal ions (Mg-Al and Mg-Fe) in the brucite-like sheets were prepared and their adsorption properties were studied in the boron removal from aqueous solution under laboratory conditions. The hydrotalcites were synthesized by the coprecipitation method and were characterized by chemical analyses, X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR) and specific surface area measurements (BET). The affinity of these materials with a mixture of B(OH)(3) and B(OH)(4)(-) was studied as a function of contact time, initial pH of the solutions, HT quantity and B concentration (adsorption isotherms). It was found that 120 min is enough time for the equilibrium state to be reached in boron adsorption. Boron removal was independent of the initial pH of the solutions because of the high buffering capacity of the LDHs. On the other hand, the adsorption capacity increases with increasing the adsorbent quantity. The adsorption isotherms, described by the Langmuir model, are of L-type, suggesting that B(OH)(4)(-) is adsorbed preferentially on HT-like materials. Besides, Mg-Al hydrotalcites showed higher adsorption capacity than Mg-Fe. We proposed that in Mg-Al hydrotalcites, the boron removal occurs by both adsorption on external surface and ion exchange, whereas for Mg-Fe it occurs only by surface adsorption. After treatment of a solution containing 5.2 mgBl(-1) with Mg-Al hydrotalcites the final boron concentration reached the recommended limit by WHO for drinking water (0.5 mgl(-1)).     

Dissipation of DDT in a heavily contaminated soil in Mato Grosso, Brazil

After the prohibition of organochlorine-pesticide use in Brazil for controlling insect vector diseases, Mato Grosso State gathered the exceeding DDT and stored it irregularly in an open air area that belongs to the National Health Foundation, causing soil contamination. This study aimed to evaluate the contamination level and dissipation of p,p'-DDT and p,p'-DDE in this area. For that, surface soil samples were collected on 19 September 2000, 15 December 2000, 4 April 2001 and soil samples 30-40 cm; 60-70 cm and 90-100 cm deep were taken from five points in the studied area on 17 July 2001. The contaminants were determined by a small scale method which consists on extraction and clean-up steps combined into one step by transferring soil samples mixed with neutral alumina to a chromatographic column prepacked with neutral alumina and elution with hexane:dichloromethane (7:3 v:v). The eluate was concentrated and the analytes were quantified by gas chromatography with an electron-capture detector. p,p'-DDT at surface soil ranged from 3,800 to 7,300 mg kg(-1). 30-40 cm deep soil sample concentrations varied from 0.036 to 440 mg kg(-1) while 90-100 cm deep samples varied from 0.069 to 180 mg kg(-1). Volatilization is probably the main dissipation process. The p,p'-DDT is moving slowly downward in the soil profile, however, the levels of this contaminant are high enough to present risk to underground waters.     

Evaluation of copper effects upon Girardia tigrina freshwater planarians based on a set of biomarkers

Copper is a common environmental contaminant, which is particularly toxic to living organisms when in high concentrations. To monitor environmental contamination by Cu2+ and other heavy metals, well characterized bioindicator organisms and standardized assays are needed. As a first step toward this end, we have analysed Cu2+ effects upon Girardia tigrina freshwater planarians, based on the assessment of mobility, regeneration performance, micronucleus (MN) frequency in regenerating animals, and reproductive performance. These four biomarkers provided complementary information on Cu2+ toxicity, teratogenicity, mutagenicity and chronic (>96 h of exposure) effects, respectively. The LC50 was calculated for newborn, adult and regenerating planarians, and values of 12+/-0.02 mg l(-1), 42+/-0.08 mg l(-1), 48+/-0.13 mg l(-1), respectively, were obtained after 96 h of exposure. Mobility, for intact adults, and time of regeneration and MN frequency, for regenerating animals, were significantly affected by Cu2+ concentrations as low as 0.10 mg l(-1). MN assay for regenerating G. tigrina neoblasts showed higher sensitivities than MN assays performed with other bioindicator freshwater organisms, such as moluscs or fish. Chronic exposure effects were clearly evidenced by assessment of reproductive performance, with significant reduction in fecundity and fertility rates upon exposure to Cu2+ concentrations as low as 0.05 mg l(-1). Therefore, G. tigrina can be regarded as a useful bioindicator species for the detection and evaluation of Cu2+ effects upon freshwater invertebrates, allowing insights on the effects of Cu2+ (and possibly other heavy metals) in a freshwater environment.     

Pollination syndromes ignored: importance of non-ornithophilous flowers to Neotropical savanna hummingbirds

Generalization prevails in flower–animal interactions, and although animal visitors are not equally effective pollinators, most interactions likely represent an important energy intake for the animal visitor. Hummingbirds are nectar-feeding specialists, and many tropical plants are specialized toward hummingbird-pollination. In spite of this, especially in dry and seasonal tropical habitats, hummingbirds may often rely on non-ornithophilous plants to meet their energy requirements. However, quantitative studies evaluating the relative importance of ornithophilous vs. non-ornithophilous plants for hummingbirds in these areas are scarce. We here studied the availability and use of floral resources by hummingbirds in two different areas of the Cerrado, the seasonal savannas in Central Brazil. Roughly half the hummingbird visited plant species were non-ornithophilous, and these contributed greatly to increase the overall nectar availability. We showed that mean nectar offer, at the transect scale, was the only parameter related to hummingbird visitation frequency, more so than nectar offer at single flowers and at the plant scale, or pollination syndrome. Centrality indices, calculated using hummingbird–plant networks, showed that ornithophilous and non-ornithophilous plants have similar importance for network cohesion. How this foraging behaviour affects reproduction of non-ornithophilous plants remains largely unexplored and is probably case specific, however, we suggest that the additional energy provided by non-ornithophilous plants may facilitate reproduction of truly ornithophilous flowers by attracting and maintaining hummingbirds in the area. This may promote asymmetric hummingbird–plant associations, i.e., pollination depends on floral traits adapted to hummingbird morphology, but hummingbird visitation is determined more by the energetic "reward" than by pollination syndromes.     

Automated micro-transfer printing with cantilevered stamps

This paper demonstrates the use of a flexible instrumented stamp to enable automated micro transfer printing as a route to large-area, deterministic assembly of microstructured device components or ‘inks’. The ability to instrument the stamp, a critical component for retrieval and placement of a micro device, to detect contact and monitor localized forces during critical events in the printing process not only allows for the development of a robust manufacturing process, but also for a unique vantage point from which to study fundamental issues and phenomena associated with adhesion and delamination of thin films from a variety of substrate materials. This paper presents basic design analysis on the requirements of the cantilevers for compatibility with a typical transfer printing environment. Off-the-shelf thin film strain gages are integrated with a thin elastomeric post as a preliminary prototype and the feasibility of transfer printing with it is demonstrated. Further, the set-up is calibrated to produce force signals for event detection and in situ diagnosis of the process.     

A time-compressed simulated geomagnetic storm influences the nest-exiting flight angles of the stingless bee Tetragonisca angustula

Insects have been used as models for understanding animal orientation. It is well accepted that social insects such as honeybees and ants use different natural cues in their orientation mechanism. A magnetic sensitivity was suggested for the stingless bee Schwarziana quadripunctata, based on the observation of a surprising effect of a geomagnetic storm on the nest-exiting flight angles. Stimulated by this result, in this paper, the effects of a time-compressed simulated geomagnetic storm (TC-SGS) on the nest-exiting flight angles of another stingless bee, Tetragonisca angustula, are presented. Under an applied SGS, either on the horizontal or vertical component of the geomagnetic field, both nest-exiting flight angles, dip and azimuth, are statistically different from those under geomagnetic conditions. The angular dependence of ferromagnetic resonance (FMR) spectra of whole stingless bees shows the presence of organized magnetic nanoparticles in their bodies, which indicates this material as a possible magnetic detector.