Projections of industrial water withdrawal under shared socioeconomic pathways and climate mitigation scenarios

We estimated global future industrial water withdrawal (IWW) by considering socioeconomic driving forces, climate mitigation, and technological improvements, and by using the output of the Asia–Pacific Integrated Model/Computable General Equilibrium (AIM/CGE) model. We carried out this estimation in three steps. First, we developed a sector- and region-specific regression model for IWW. The model utilized and analyzed cross-country panel data using historical statistics of IWW for 10 sectors and 42 countries. Second, we estimated historical IWW by applying a regression model. Third, we projected future IWW from the output of AIM/CGE. For future projections, we considered and included multiple socioeconomic assumptions, namely different shared socioeconomic pathways (SSPs) with and without climate mitigation policy. In all of the baseline scenarios, IWW was projected to increase throughout the twenty-first century, but growth through the latter half of the century is likely to be modest mainly due to the effects of decreased water use intensity. The projections for global total IWW ranged from 461 to 1,560 km³/year in 2050 and from 196 to 1,463 km³/year in 2100. The effects of climate mitigation on IWW were both negative and positive, depending on the SSPs. We attributed differences among scenarios to the balance between the choices of carbon capture and storage (CCS) and renewable energy. A smaller share of CCS was accompanied by a larger share of non-thermal renewable energy, which requires a smaller amount of water withdrawal per unit of energy production. Renewable energy is, therefore, less water intensive than thermal power with CCS with regard to decarbonizing the power system.     

Pore structure and adsorption properties of activated carbon prepared from granular molded waste paper

We have previously manufactured activated carbon using waste paper board, which was prepared by adding 8% phenol resin adhesive to torn waste newspaper and hot-pressing. In this study, the pretreatment process of the raw material was simplified; the waste paper was extruded to form granules. The activated carbon was manufactured by the carbon dioxide activation method using the granules as the raw material. The properties of the activated carbon were evaluated based on the pore structure, the iodine adsorption number, and the adsorption of toluene vapor in a sealed chamber. The activated carbon, which was manufactured at an activation temperature of 1100°C and a treatment time of 60min, exhibited a specific surface area of 1241m²/g and an iodine adsorption number of 1120mg/g. These results were similar to those obtained for two commercially available activated carbons. The extent of toluene vapor adsorption by this activated carbon was similar to that observed for the two commercial activated carbons over a period of 130min.     

Determination of chlorine in air with the pyridine-pyrazolone reagent

An improved method for the determination of chlorine in air is described. The principle of this method is based on the absorption of chlorine in p-toluenesulfonamide aqueous solution, followed by color development with a pyridine-pyrazolone reagent. Both the chlorine absorbed in the solution and the color developed with the reagent were stable. Positive interference by nitrogen dioxide was not observed.     

Reductive dechlorination of non-ortho substituted polychlorinated biphenyls by ultraviolet irradiation in alkaline 2-propanol

The photodechlorination pathways of 3,3′,4,5,5′-pentachlorobiphenyl (3,3′,4,5,5′-PentaCB) and the related lower polychlorinated biphenyl congeners irradiated at 254 nm in alkaline 2-propanol were elucidated. Steric effect is the most important factor for controlling the dechlorination pattern of these substrates. Electronic effect also influences the photoreactivity of chlorine substituents.     

Lead contamination in surface soil on roads from used lead–acid battery recycling in Dong Mai,Northern Vietnam

Used lead–acid battery (ULAB) recycling has caused numerous health and environmental issues in developing countries. Surface soil pollution from ULAB recycling activities has been linked with elevated levels of lead in human blood. We measured surface soil lead in and surrounding the ULAB recycling village of Hung Yen in northern Vietnam in 2011, 2013, and 2014. The data were analyzed statistically and discussed with respect to distance from the contamination source, year of measurement, contamination pathway, and countermeasures against the contamination. Transportation routes from the smelter or collection site displayed the greatest concentration of surface soil lead (median 6400–10,000 mg/kg). Surface soil lead decreased significantly with distance along the road from the ULAB recycling site, although such a decrease was not observed for rice fields, agricultural roads, or garden soil. Re-suspension and adherence by traffic were identified as key pollution pathways. Distance from the source, covering of the surface of roads, construction of walls, and position relative to the source were shown to be the most effective factors in the reduction of surface soil lead pollution. Application of a combination of these measures should result in improvement in the health of residents.     

Niche differentiation and fine-scale projections for Argentine ants based on remotely sensed data.

Modeling ecological niches of species is a promising approach for predicting the geographic potential of invasive species in new environments. Argentine ants (Linepithema humile) rank among the most successful invasive species: native to South America, they have invaded broad areas worldwide. Despite their widespread success, little is known about what makes an area susceptible--or not--to invasion. Here, we use a genetic algorithm approach to ecological niche modeling based on high-resolution remote-sensing data to examine the roles of niche similarity and difference in predicting invasions by this species. Our comparisons support a picture of general conservatism of the species' ecological characteristics, in spite of distinct geographic and community contexts.     

Evaluation of metals in the residue of paper sludge after recovery of pulp components using an ionic liquid

The quantity of sludge produced by the paper industry in Japan in 2011 was estimated to be 27.91 million tons wet weight. This amount is the third largest among all industrial wastes. To explore ways of reusing recovered paper pulp and safely disposing of the residue, we investigated the distribution of metals in the process of recovery of pulp from two types of paper sludge using an ionic liquid. 32 and 46 % of pulp from paper sludge A and B was recovered using ionic liquid, respectively; the resultant weight reduction of the solid mass was comparable to that of incineration. There were virtually no heavy metals but aluminum in the recovered pulp, which makes its reuse viable at present. The characteristics of the metals in the residues differed according to the treatment used and properties of the paper sludge. Copper accounted for ~10 % in the ionic liquid used for recovery of pulp from the paper sludges. This suggests that [bmIm]Cl has the potential to dissolve a specific amount of copper compared to other metals.     

道路交通事故信息文本预处理技术研究与实践

文本预处理是文本挖掘的关键一步,建立与信息相匹配的标准语义集合能缩短信息处理的时间,提高信息的提取率和识别精度。根据国家交通事故信息采集规范要求,从国家公共安全行业标准中抽取相关交通事故基本信息的标准词汇及代码,构建了一套含有12个属性项目、185个标准词汇的交通事故信息文本预处理用标准化语义集合,并将其应用于国家安全生产监督管理总局的事故查询系统,对系统中2004—2014年期间所收集的8 156件重大道路交通事故信息中的文本数据进行分析。结果表明:利用这套语义集合能更多地提取交通事故信息,可为准确捕捉交通事故特征和研究交通事故发生机理提供重要依据,也为开发交通事故自动信息识别系统创造了重要的条件。     

Factors affecting the biodegradability of biodegradable polyester in soil

The biodegradabilities of two polyester, P(3HB-co-3HV) and PCL, in soil were studied to examine the factors affecting the biodegradability of biodegradable plastics in soil. The polymers were mixed with soil and the time course of the biodegradation of the polymer was measured by analyzing the residual polymer. The polymer biodegraded little in early period of the test, but did in the first-order kinetics after a certain time which was dependent on the test substance and soil used. The rate constant and the induction period of the biodegradation were determined from the residual curve. The rate constant and the induction period for P(3HB-co-3HV) increased and reached to the constant values with increasing the particle size of the test substance. Both values depended on the kind of test soil and on the sampling date for the same kind of soil. The variation in the biodegradability among the same kind of soil was primarily attributed to the variation in water content of the soil. The rate constant and the induction period of PCL were smaller and longer than P(3HB-co-3HV), respectively.