A study on chemical properties of groundwater and soil in ophiolitic rocks in Firuzabad, east of Shahrood, Iran: with emphasis to heavy metal contamination

In order to assess the chemical properties of groundwater and soil in ophiolitic zone of Firuzabad, in east of Shahrood, Iran, 10 soil samples with regard to sensitive points (vicinity to mine, ophiolitic rocks, and villages) and 10 groundwater samples including nine samples from springs, and also one sample from a well in a village of the study area were taken. These samples were analyzed in laboratories using inductively coupled plasma method. The soil samples were also evaluated for grain size. The obtained results show that most of heavy and major elements were exceeding the permissible levels in soil and water samples in the study area. On the subject of soil quality, concentrations of elements Cr, Mn, Fe, Ca, Mg, Ca, Ni, and Zn are above permissible levels. Enrichment factor and index of geoaccumulation have been calculated for heavy and major elements of all soil samples. According to the obtained results, it may be argued that soil samples are contaminated in relation to the above-mentioned indices. Comparing the concentrations of elements with results of grain size analysis illustrates that the concentrations of Cr, Ni, Fe, Mg, and Co are positively correlated with sand fraction and the concentrations of Al, P, Mn, and Pb are directly proportional with clay fraction in soil samples. The study on water contamination suggests that concentrations of elements Cr, Ni, and Mg in groundwater samples of the study area are above the permissible levels. Some indices like metal index and heavy metal pollution index show that most of the water samples include heavy metal contamination.     

PCDD/F formation from oxy-PAH precursors in waste incinerator flyash

The yield of PCDD/F in relation to the presence of oxygenated PAH in model waste incinerator flyash has been investigated in a fixed bed laboratory scale reactor. Experiments were undertaken by thermal treatment of the model flyash at 250 and 350 °C under a simulated flue gas stream for 2 h. After reaction, the PCDD/F content of the reacted flyash and the PCDD/F released into the exhaust gas, and subsequently trapped by XAD-II resin in a down-stream condensation system were analyzed. The PAHs investigated were, dibenzofuran and benzo[b]naphtho[2,3-d]furan and were spiked onto the model flyash as reactant precursors for PCDD/F formation. The results showed significant formation of furans from both of the PAH investigated, however except from some highly chlorinated dioxin congeners, the formation of dioxins was not so common. Benzonaphthofuran was significantly more reactive than dibenzofuran in PCDD/F formation, in spite of the fact that dibenzofuran is structurally more similar to that of PCDD/F. Thus, there was no clear attribution between the chemical structure of PAH used and the formation of PCDD/F. There were considerable differences between the yields of PCDD/F congeners in the gaseous species and those in the reacted flyash under the same operational conditions. The concentration of PCDD/Fs was reduced at the higher reaction temperature of 350 °C; however, the higher temperature resulted in the majority of the PCDD/F formed on the flyash being released into the gas phase.     

Removal potential of toxic 2378-substituted PCDD/F from incinerator flue gases by waste-derived activated carbons

The application of activated carbons has become a commonly used emission control protocol for the removal or adsorption of persistent organic pollutants from the flue gas streams of waste incinerators. In this study, the 2378-substituted PCDD/F removal efficiency of three types of activated carbons derived from the pyrolysis of refuse derived fuel, textile waste and scrap tyre was investigated and compared with that of a commercial carbon. Experiments were carried out in a laboratory scale fixed-bed reactor under a simulated flue gas at 275 °C with a reaction period of four days. The PCDD/F in the solid matrices and exhaust gas, were analyzed using gas chromatography coupled with a triple quadrupole mass spectrometer. In the absence of activated carbon adsorbent, there was a significant increase in the concentration of toxic PCDD/F produced in the reacted flyash, reaching up to 6.6 times higher than in the raw flyash. In addition, there was a substantial release of PCDD/F into the gas phase, which was found in the flue gas trapping system. By application of the different commercial, refuse derived fuel, textile and tyre activated carbons the total PCDD/F toxic equivalent removal efficiencies in the exhaust gas stream were 58%, 57%, 64% and 52%, respectively. In general, the removal of the PCDDs was much higher with an average of 85% compared to PCDFs at 41%. Analysis of the reacted activated carbons showed that there was some formation of PCDD/F, for instance, a total of 60.6 μg I-TEQ kg⁻¹ toxic PCDD/F was formed in the refuse derived fuel activated carbon compared to 34 μg I-TEQ kg⁻¹ in the commercial activated carbon. The activated carbons derived from the pyrolysis of waste, therefore, showed good potential as a control material for PCDD/F emissions in waste incinerator flue gases.     

Effects of gaseous NH(3) and SO(2) on the concentration profiles of PCDD/F in flyash under post-combustion zone conditions

The influence of gaseous ammonia and sulphur dioxide on the formation of 2378-substituted PCDD/F on a reference flyash from a municipal waste incinerator has been investigated using a laboratory scale fixed-bed reactor. The reference flyash samples (BCR-490) was reacted under a simulated flue gas stream at temperatures of 225 and 375°C for 96h. The experiments were carried out in two series: first with simulated flue gas alone, and then with injection of NH(3) or SO(2) gas into the flue gas just before the reactor inlet. It was found that the injection of gaseous ammonia into the flue gas could decrease the concentration of both PCDD and PCDF by 34-75% from the solid phase and by 21-40% from the gas phase. Converting the results to I-TEQ values, it could reduce the total I-TEQ values of PCDD and PCDF in the sum of the flyash and exhaust flue gas by 42-75% and 24-57% respectively. The application of SO(2) led to 99% and 93% reductions in the PCDD and PCDF average congener concentrations, respectively in the solid phase. In the gas phase, the total reductions were 89% and 76% for PCDD and PCDF, respectively. Moreover, addition of SO(2) reduced the total I-TEQ value of PCDD and PCDF in the flyash and exhaust flue gas together by 60-86% and 72-82% respectively. Sulphur dioxide was more effective than ammonia in suppressing PCDD/F formation in flyash under the conditions investigated.     

The association of prenatal exposure to benzophenones with gestational age and offspring size at birth

Environmental Science and Pollution Research - In recent decades, emerging environmental pollutants such as endocrine-disrupting chemicals (EDCs) have become a particular concern. This study...     

Protective effects of quercetin against sodium fluoride-induced oxidative stress in rat erythrocytes

Protective effects of quercetin against oxidative stress induced by sodium fluoride intoxication in rat erythrocytes were evaluated. Rats were divided into five groups consisting of 10 in each for this experiment. The animals of group I received water and standard diet to serve as control group, the animals of groups II and III were treated with quercetin (10 and 20?mg?kg^?1 body weight), administrated intraperitoneally for 7 days followed by sodium fluoride (600?ppm) in drinking water for the next 7 days. The animals of group IV were treated with vitamin C (10?mg?kg^?1) intraperitoneally for 7 days followed by sodium fluoride treatment for next 7 days serving as positive control group. The animals of group V were treated only with sodium fluoride (600?ppm) for the same time and were used as control group. Blood sample were collected via retro-orbital puncture. The antioxidant enzymes, superoxide dismutase, and catalase, as well as the levels of reduced glutathione and lipid peroxidation end products were measured in erythrocytes. There was a significant increase in lipid peroxidation along with a decrease in superoxide dismutase activity in the erythrocytes of sodium fluoride-treated animals. Quercetin treatment prior to fluoride administration normalized the levels of all parameters measured in the rat erythrocytes.     

Factors Influencing Unsafe Behaviors and Accidents on Construction Sites: A Review

Objective. Construction is a hazardous occupation due to the unique nature of activities involved and the repetitiveness of several field behaviors. The aim of this methodological and theoretical review is to explore the empirical factors influencing unsafe behaviors and accidents on construction sites. Methods. In this work, results and findings from 56 related previous studies were investigated. These studies were categorized based on their design, type, methods of data collection, analytical methods, variables, and key findings. A qualitative content analysis procedure was used to extract variables, themes, and factors. In addition, all studies were reviewed to determine the quality rating and to evaluate the strength of provided evidence. Results. The content analysis identified 8 main categories: (a) society, (b) organization, (c) project management, (d) supervision, (e) contractor, (f) site condition, (g) work group, and (h) individual characteristics. The review highlighted the importance of more distal factors, e.g., society and organization, and project management, that may contribute to reducing the likelihood of unsafe behaviors and accidents through the promotion of site condition and individual features (as proximal factors). Conclusion. Further research is necessary to provide a better understanding of the links between unsafe behavior theories and empirical findings, challenge theoretical assumptions, develop new applied theories, and make stronger recommendations.