Passive sampling of glycol ethers and their acetates in indoor air

This study examined the performances of a thermal desorbable radial diffusive sampler for the weekly measurement of eight glycol ethers in indoor air and described the results of an application of this method carried out as part of HABIT'AIR Nord - Pas de Calais program for the air monitoring of these compounds in sixty homes located in northern France. The target compounds were the four glycol ethers banned from sale to the public in France since the 1990s (i.e. 2-methoxy ethanol, 2-ethoxy ethanol and their acetates) and four other glycol ethers derivatives of which the use have increased considerably (i.e. 1-methoxy-2-propanol, 2-butoxy ethanol and their acetates).A test program was carried out with the aim of validating the passive sampling method. It allowed the estimation of all the parameters of a method for each compound (calibration, analytical precision, desorption efficiency, sampling rate in standard conditions, detection limit and stability of sample before and after exposure), the examination of the influence of environmental factors on the sampling rate by some exposure chamber experiments and the assessment of the uncertainty of the measurements.The results of this evaluation demonstrated that the method has turned out to be suitable for six out of eight glycol ethers tested. The effect of the environmental factors on the sampling rates was the main source of measurement uncertainty. The measurements done in sixty homes revealed a relative abundance of 1-methoxy-2-propanol that was found in more than two thirds of homes at concentration levels of 4.5 microg m(-3) on average (a maximum value of 28 microg m(-3)). 1-methoxy-2-propanol acetate and 2-butoxy ethanol were also detected, but less frequently (in 19% of homes) and with the concentrations below 12 microg m(-3). The highest levels of these glycol ethers appear to be in relation to the emissions occurring at the time of cleaning tasks.     

Consequence analysis by means of characteristic curves to determine the damage to buildings from bursting spherical vessels

Since the damage suffered by buildings as a consequence of explosions usually affect the people inside them, it is important to take it into account when performing consequence analysis. The aim of this paper is to provide a methodology to estimate consequences to buildings from pressure waves produced by spherical vessel burst. This is done by combining characteristic overpressure–impulse–distance curves [González Ferradás, E., Diaz Alonso, F., Sanchez Perez, J.F., Miñana Aznar, A., Ruiz Gimeno, J. and Martinez Alonso, J., 2006, Characteristic overpressure–impulse–distance curves for vessel burst, Process Safety Progress, 25(3): 250–254] with PROBIT equations. The main advantage of this methodology is that it allows an overview of all the magnitudes involved, as damage is shown in the same graph as the overpressure, impulse and distance. In this paper diagrams and equations are presented to determine minor damage to buildings (broken windows, displacement of doors and window frames, tile displacement, etc.), major structural damage (cracks in walls, collapse of some walls) and collapse (the damage is so extensive that the building is partially or totally demolished).     

Soil characteristics, heavy metal availability and vegetation recovery at a former metallurgical landfill: Implications in risk assessment and site restoration

Pedological and botanical characteristics of a former metallurgical landfill were examined to assess the risks of heavy metals mobility and to evaluate remediation feasibility. In addition to very high heavy metals levels (Cu, Cr, Mn, Ni, Pb, Zn), the soil was characterized by a lack of clear horizonation, a relatively high pH, a high mineral and organic carbon contents, a low nitrogen level and a high C/N ratio. A two step sequential extraction showed that heavy metals were poorly labile (i.e. not soluble in diluted CaCl2), indicating that their leaching under natural conditions was probably very low. However, extraction with DTPA generated significant amounts of metals (mainly Pb and Cu), suggesting they were potentially mobilizable. A botanical survey of the area showed a biodiverse plant community (28 species and 11 families), with no obvious toxicity symptoms. Measurements of metal contents in dominant species confirmed that they were closely similar to those reported for species growing in unpolluted environments. Consequently, for an effective site restoration, indigenous species could be well suited to cope with local conditions in a phytostabilization strategy.     

Characteristic overpressure–impulse–distance curves for the detonation of explosives, pyrotechnics or unstable substances

A number of models have been proposed to calculate overpressure and impulse from accidental industrial explosions. When the blast is produced by explosives, pyrotechnics or unstable substances, the TNT equivalent model is widely used. From the curves given by this model, data are fitted to obtain equations showing the relationship between overpressure, impulse and distance. These equations, referred to here as characteristic curves, can be fitted by means of power equations, which depend on the TNT equivalent mass. Characteristic curves allow determination of overpressure and impulse at each distance.     

L'utilisation de souches de micro-organismes de collection pour l'etude de la biodegradabilite des pesticides

Use of Microbial strains from collection in the study of pesticide biodegradability. 5 different herbicides and 1 metabolite of herbicide were subjected to biodegradation by different microbial strains and simultaneously by soil suspensions.To take account of possible co-metabolisme a supplementary source of carbon was added in the culture media. Results were discussed.     

Is tree growth reduction related to direct foliar injuries or soil chemistry modifications?

In the context of intense emissions causing atmospheric pollution, tree growth reductions could be related to soil chemistry modifications or direct foliar injuries. To verify these hypotheses, mineral soils were sampled in an area (Murdochville, Canada) where previous studies had demonstrated that tree growth was impacted by smelter emissions and that forest floor lead concentrations could be used as a proxy for atmospheric pollutant depositions. Samples were analysed for Al, Pb (concentrations and isotope ratios), basic cations (Ca, K, P, and Mg) and Zr. Mass balance calculations were performed on soil profiles to assess vertical migration of elements. Pb concentrations in litter diminished gradually with distance from the smelter. The Pb isotope ratios in these organic soil layers were close to those measured in the Murdochville ores. These patterns were not encountered in mineral soil layers. Pb isotope ratios in these layers were close to those measured in uncontaminated geological materials, and Pb concentrations and basic cation depletions were not related to the proximity of the smelter. Growth reduction was closely associated with litter Pb concentrations, which were used as a proxy for atmospheric deposition, but was not correlated with any elemental concentration or cation depletion measured in mineral soil layers. Our overall results suggest that trees responded mainly to direct atmospheric emissions, which caused foliar damage, rather than to soil chemistry modifications.     

Changes in yolk total proteins and lipid components and embryonic growth rates during lobster (<Emphasis Type="Italic">Homarus americanus</Emphasis>) egg development under a simulated seasonal temperature cycle

From August 2000 to June 2001, seven egg-carrying female lobster (Homarus americanus) from the Îles de la Madeleine population (Gulf of St. Lawrence, Canada) were held under a simulated seasonal temperature cycle to monitor egg development from extrusion to hatching. For the first time, changes in the yolk components (total lipids and major lipid classes, total proteins) and embryo growth of single eggs were monitored separately over the entire development period. Under the controlled temperature conditions, egg development proceeded in three phases. (1) Autumn, from extrusion to early December, was marked by a rapid increase in the Perkinss eye index and rapid declines in yolk total proteins and triacylglycerols (TAG). Embryo daily growth rate was estimated between 1 and 2 µg proteins day^–1. (2) Winter, from late December to early April (temperature stable at ca. 1°C) was characterized by a stationary phase in the evolution of the eye index and yolk lipid use, and embryo growth slowed significantly. (3) Spring, from late April to hatching in June was the period with the most rapid changes in yolk TAG and embryo growth rates >6 µg proteins day^–1 were recorded. Almost 65% of the live biomass (total proteins) of the hatching larvae was accumulated during the last few weeks of development. An index of embryo growth efficiency was estimated as the slope of the relationship between embryo total proteins and yolk TAG during egg development. A relationship was found between the initial mean egg dry weight and the embryo growth efficiency index suggesting that under the same experimental conditions bigger eggs used yolk lipids more efficiently and sustained faster embryonic growth than smaller eggs. The relationship may also explain why larger larvae originate from larger eggs.Communicated by R.J.Thompson, St Johns     

Efficacy of Cinnamaldehyde Against Enteric Viruses and Its Activity After Incorporation Into Biodegradable Multilayer Systems of Interest in Food Packaging

Cinnamaldehyde (CNMA), an organic compound that gives cinnamon its flavor and odor, was investigated for its virucidal activity on norovirus surrogates, murine norovirus (MNV) and feline calicivirus (FCV), and hepatitis A virus (HAV). Initially, different concentrations of CNMA (0.1, 0.5 and 1 %) were individually mixed with each virus at titers of ca. 6–7 log₁₀ TCID₅₀/ml and incubated 2 h at 4 and 37 °C. CNMA was effective in reducing the titers of norovirus surrogates in a dose-dependent manner after 2 h at 37 °C, while HAV titers were reduced by 1 log₁₀ after treatment with 1 % of CNMA. When incubation time was extended, HAV titers were reduced by 3.4 and 2.7 log₁₀ after overnight incubation at 37 °C with 1 and 0.5 % of CNMA, respectively. Moreover, this paper analyzed, for the first time, the antiviral activity of adding an active electrospun interlayer based on zein and CNMA to a polyhydroxybutyrate packaging material (PHB) in a multilayer form. Biodegradable multilayer systems prepared with 2.60 mg/cm² (~9.7 %) of CNMA completely inactivated FCV according to ISO 22196:2011, while MNV titers were reduced by 2.75 log₁₀. When the developed multilayer films were evaluated after one month of preparation or at 25 °C, the antiviral activity was reduced as compared to freshly prepared multilayer films evaluated at 37 °C. The results show the excellent potential of this system for food contact applications as well as for active packaging technologies in order to maintain or extend food quality and safety.