Association of generalized dystrophic epidermolysis bullosa with positive acetylcholinesterase and markedly elevated maternal serum and amniotic fluid alpha-fetoprotein

A case of fatal generalized dystrophic epidermolysis bullosa is described in a prematurely born female whose mother had strikingly elevated mid-trimester serum and amniotic fluid alpha-fetoprotein concentrations, a positive amniotic fluid acetylcholinesterase band, and negative serial ultrasound studies. This case lends further support to an association between autosomal recessive generalized dystrophic epidermolysis bullosa and increased levels of alpha-fetoprotein, positive amniotic fluid acetylcholines'terase, and normal ultrasound findings.     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.     

Hydroponic root mats for wastewater treatment—a review

Hydroponic root mats (HRMs) are ecotechnological wastewater treatment systems where aquatic vegetation forms buoyant filters by their dense interwoven roots and rhizomes, sometimes supported by rafts or other floating materials. A preferential hydraulic flow is created in the water zone between the plant root mat and the bottom of the treatment system. When the mat touches the bottom of the water body, such systems can also function as HRM filter; i.e. the hydraulic flow passes directly through the root zone. HRMs have been used for the treatment of various types of polluted water, including domestic wastewater; agricultural effluents; and polluted river, lake, stormwater and groundwater and even acid mine drainage. This article provides an overview on the concept of applying floating HRM and non-floating HRM filters for wastewater treatment. Exemplary performance data are presented, and the advantages and disadvantages of this technology are discussed in comparison to those of ponds, free-floating plant and soil-based constructed wetlands. Finally, suggestions are provided on the preferred scope of application of HRMs.     

Methodological choices in solution-oriented adaptation research: a diagnostic framework

While methodological choices are critical for solution-oriented adaptation research, the current debate on these is underdeveloped and characterized by simple dichotomies such as bottom-up and top-down as well as vaguely defined concepts such as vulnerability. Adaptation challenges and approaches for addressing them are more diverse than these labels suggest. This paper addresses this deficit by developing a diagnostic framework that helps to identify approaches suitable for addressing a given adaptation challenge. The framework was developed out of the necessity to discuss diverse approaches from natural science, social science and practice in a set of adaptation case studies conducted within the European funded MEDIATION project. Based on these case studies complemented by the literature, we iteratively abstracted typical adaptation challenges researched, typical approaches taken, and empirical, theoretical and normative criteria applied for choosing a particular approach. Our results refine the methodological debate by distinguishing between the three general adaptation challenges of identifying adaptation needs, identifying adaptation measures and appraising adaptation options. Adaptation challenges are further classified according to private and public interest involved, individual or various types of collective action involved, data/model availability, decision-making time horizon, etc. For each type of challenge and approach, we give examples and discuss salient issues. Our results point to the opportunity to apply institutional and behavioural research to support the identification of measures and possibly avoiding barriers in practice. The diagnostic framework also serves as the basis for the forthcoming guidance for assessing vulnerability, impacts and adaptation to be published by the UNEP programme of research on climate change vulnerability, impacts and adaptation.     

Concentrations of polybrominated diphenyl ethers (PBDEs) in matched samples of human milk,dust and indoor air

Polybrominated diphenyl ethers (PBDEs) are lipophilic, persistent pollutants found worldwide in environmental and human samples. Exposure pathways for PBDEs remain unclear but may include food, air and dust. The aim of this study was to conduct an integrated assessment of PBDE exposure and human body burden using 10 matched samples of human milk, indoor air and dust collected in 2007–2008 in Brisbane, Australia. In addition, temporal analysis was investigated comparing the results of the current study with PBDE concentrations in human milk collected in 2002–2003 from the same region.PBDEs were detected in all matrices and the median concentrations of BDEs -47 and -209 in human milk, air and dust were: 4.2 and 0.3 ng/g lipid; 25 and 7.8 pg/m³; and 56 and 291 ng/g dust, respectively. Significant correlations were observed between the concentrations of BDE-99 in air and human milk (r = 0.661, p = 0.038) and BDE-153 in dust and BDE-183 in human milk (r = 0.697, p = 0.025). These correlations do not suggest causal relationships — there is no hypothesis that can be offered to explain why BDE-153 in dust and BDE-183 in milk are correlated. The fact that so few correlations were found in the data could be a function of the small sample size, or because additional factors, such as sources of exposure not considered or measured in the study, might be important in explaining exposure to PBDEs. There was a slight decrease in PBDE concentrations from 2002–2003 to 2007–2008 but this may be due to sampling and analytical differences. Overall, average PBDE concentrations from these individual samples were similar to results from pooled human milk collected in Brisbane in 2002–2003 indicating that pooling may be an efficient, cost-effective strategy of assessing PBDE concentrations on a population basis.The results of this study were used to estimate an infant's daily PBDE intake via inhalation, dust ingestion and human milk consumption. Differences in PBDE intake of individual congeners from the different matrices were observed. Specifically, as the level of bromination increased, the contribution of PBDE intake decreased via human milk and increased via dust. As the impacts of the ban of the lower brominated (penta- and octa-BDE) products become evident, an increased use of the higher brominated deca-BDE product may result in dust making a greater contribution to infant exposure than it does currently.To better understand human body burden, further research is required into the sources and exposure pathways of PBDEs and metabolic differences influencing an individual's response to exposure. In addition, temporal trend analysis is necessary with continued monitoring of PBDEs in the human population as well as in the suggested exposure matrices of food, dust and air.     

A detailed field-based evaluation of naphthenic acid mobility in groundwater

An anaerobic plume of process-affected groundwater was characterized in a shallow sand aquifer adjacent to an oil sands tailings impoundment. Based on biological oxygen demand measurements, the reductive capacity of the plume is considered minimal. Major dissolved components associated with the plume include HCO₃, Na, Cl, SO₄, and naphthenic acids (NAs). Quantitative and qualitative NA analyses were performed on groundwater samples to investigate NA fate and transport in the subsurface. Despite subsurface residence times exceeding 20 years, significant attenuation of NAs by biodegradation was not observed based on screening techniques developed at the time of the investigation. Relative to conservative tracers (i.e., Cl), overall NA attenuation in the subsurface is limited, which is consistent with batch sorption and microcosm studies performed by other authors. Insignificant biological oxygen demand and low concentrations of dissolved As (< 10 µg L^− 1) in the plume suggest that the potential for secondary trace metal release, specifically As, via reductive dissolution reactions driven by ingress of process-affected water is minimal. It is also possible that readily leachable As is not present in significant quantities within the sediments of the study area. Thus, for similar plumes of process-affected groundwater in shallow sand aquifers which may occur as oil sands mining expands, a reasonable expectation is for NA persistence, but minimal trace metal mobilization.     

Toxic equivalent concentrations (TEQs) for baseline toxicity and specific modes of action as a tool to improve interpretation of ecotoxicity testing of environmental samples

The toxic equivalency concept is a widely applied method to express the toxicity of complex mixtures of compounds that act via receptor-mediated mechanisms such as induction of the arylhydrocarbon or estrogen receptors. Here we propose to extend this concept to baseline toxicity, using the bioluminescence inhibition test with Vibrio fischeri, and an integrative ecotoxicity endpoint, algal growth rate inhibition. Both bioassays were validated by comparison with literature data and quantitative structure-activity relationships (QSARs) for baseline toxicity were developed for all endpoints. The novel combined algae test, with Pseudokirchneriella subcapitata, allows for the simultaneous evaluation of specific inhibition of photosynthesis and growth rate. The contributions of specific inhibition of photosynthesis and non-specific toxicity could be differentiated by comparing the time and endpoint pattern. Photosynthesis efficiency, measured with the saturation pulse method after 2 h of incubation, served as indicator of specific inhibition of photosynthesis by photosystem II inhibitors. Diuron equivalents were defined as toxicity equivalents for this effect. The endpoint of growth rate over 24 h served to derive baseline toxicity equivalent concentrations (baseline-TEQ). By performing binary mixture experiments with reference compounds and complex environmental samples from a sewage treatment plant and a river, the TEQ concept was validated. The proposed method allows for easier interpretation and communication of effect-based water quality monitoring data and provides a basis for comparative analysis with chemical analytical monitoring.     

Characterization of hard- and softwood biochars pyrolyzed at high temperature

A wide range of waste biomass/waste wood feedstocks abundantly available at mine sites provide the opportunity to produce biochars for cost-effective improvement of mine tailings and contaminated land at metal mines. In the present study, soft- and hardwood biochars derived from pine and jarrah woods at high temperature (700 °C) were characterized for their physiochemical properties including chemical components, electrical conductivity, pH, zeta potential, cation-exchange capacity (CEC), alkalinity, BET surface area and surface morphology. Evaluating and comparing these characteristics with available data from the literature have affirmed the strong dictation of precursor type on the physiochemical properties of the biochars. The pine and jarrah wood feedstocks are mainly different in their proportions of cellulose, hemicellulose and lignin, resulting in biochars with heterogeneous physiochemical properties. The hardwood jarrah biochar exhibits much higher microporosity, alkalinity and electrostatic capacity than the softwood pine. Correlation analysis and principal component analysis also show a good correlation between CEC–BET–alkalinity, and alkalinity–ash content. These comprehensive characterization and analysis results on biochars’ properties from feedstocks of hardwood (from forest land clearance at mine construction) and waste pine wood (from mining operations) will provide a good guide for tailoring biochar functionalities for remediating metal mine tailings. The relatively inert high-temperature biochars can be stored for a long term at mine closure after decades of operations.