A Comparative Study of Doum fiber and Shrimp Chitin Based Reinforced Low Density Polyethylene Biocomposites

The aim of this paper was to study the effects of reinforcing low density polyethylene (LDPE) by using bio-fillers (Doum cellulose or Shrimp chitin) on the mechanical properties. Both, Doum cellulose extracted frsom Doum leaves and Shrimp chitin extracted from shrimp co-products were compounded with LPDE without and with compatibilizer. The biocomposites were prepared by melt blending in a twin-screw extruder. Torsion and flexural tests were performed to investigate the impact of each reinforcement on the biocomposite mechanical properties. The SEM was carried out to study the filler/polymer interface adhesion. The present study has demonstrated that Doum fibers and shrimp chitin succeed in improving the mechanical properties of LPDE bio-composites. The results also showed that the use of maleic anhydride-grafted polyethylene as a compatibilizer improves filler adhesion/matrix and mechanical properties. This study exhibits that polyethylene composites based on Doum fibers or shrimp chitin can be used to replace the polyethylene materials in several fields like packaging and automotive industries.     

Degradation of the herbicide imazapyr by Fenton reactions

The degradation of the herbicide imazapyr has been carried out by three advanced oxidation processes involving iron ions as catalysts: Fentons reagent, photo-Fenton and electro-Fenton. We show that all processes are rapid and efficient. The kinetic rate constant was found to be k=5.4×10⁹ M^–1 s^–1. The mineralization of imazapyr is almost complete using the photo-Fenton and electro-Fenton processes.     

Extraction and Characterization of Nanocrystalline Cellulose from Doum (<Emphasis Type="Italic">Chamaerops humilis</Emphasis>) Leaves: A Potential Reinforcing Biomaterial

The aim of this investigation was to extract nanocrystalline cellulose (NCC) from Moroccan Doum fibers (Chamaerops humilis) by chemical treatment to examine their potential for use as reinforcement fibers in bionanocomposite applications. The chemical composition, morphological and structural properties of the Doum fibers was determined at different stages of chemical treatment. Morphological (transmission electron microscopy and scanning electron microscopy), structural characterization (X-ray diffraction, Fourier transformed infrared), thermal characterization (thermogravimetric analysis). The suspension electrostatic stabilization (zeta potential) of NCCs was also carried out. The results of these characterization analysis found that average size of the NCC is 220 nm in length and 11 nm in diameter, with high crystallinity index (93 %), a thermal stability comparable to that of untreated Doum fibers (degradation temperature 340 °C), which is reasonably promising for the use of these nanofibers in reinforced-polymer manufacturing, and a good stability in water suspension that it allows their utilization such as reinforcement of the water-soluble polymers to prepare the bio-nanocomposite.     

Textural characterization of media composed of compacted pieces of cardboard and polyethylene using a gas tracer method

The aim of this work is the experimental determination of effective transport properties of porous media consisting of compacted pieces of cardboard and polyethylene (PE). The proposed method itself is more general and can be applied to many different materials and contexts. Three major transport properties were determined: porosity, tortuosity factor and permeability. Three parameters characterizing the media were varied over a wide range: the bulk density, the size of the elements entering the mix, and the proportion of cardboard and PE in the mix. The properties were measured by means of a specially designed experimental device based on miscible gas tracing. The porosity and tortuosity factor were simultaneously determined by parametric identification, based on the experimental sample output response to an inlet gas concentration step change compared to the results of a direct numerical model. Permeability was calculated in the standard way from the measurement of the pressure drop across the sample. The reproducibility of the measurements was very good. It was found that changing the material density of the medium significantly affects all three structural properties. When the bulk density is varied between 300 and 900 kg m(-3), the tortuosity factor varies in a range as large as 18-8 and the permeability decreases by a ratio of 2-3. The tortuosity factor shows unusual variation, characterized by a decrease when density is increased above 500 kg m(-3). The size of the elements does not significantly affect the structural properties of the medium in the range of parameters studied.     

Modelling the potential impacts of land use/cover change on terrestrial carbon stocks in north-west Morocco

Terrestrial ecosystems store more carbon (C) than the atmosphere and provide ecosystem services (ES) such as global climate regulation, by sequestering carbon within biomass and soil. Land use land cover (LULC) change is considered a key factor, playing an important role in the dynamic variations of carbon storage. The aim of this paper is to assess the effects that LULC has had on carbon stocks and consequently on climate change regulation in north-western Morocco over 21 years. To achieve this aim, the Integrated Valuation of ES and Trade-offs (InVEST) model is used to assess status and variation in the net amount of carbon stored by the different types of LULC, and the economic value of the carbon sequestered in the remaining stock. The results show that the total carbon stock increased from 4.81TgC in 1996 to 4.98TgC in 2017. Over the 21 years, the LULC changes had the greatest effect on carbon storage - an increase of 6.87% with 0.17TgC of carbon sequestered, since the majority of unused land was changed to forest and cultivated land. Based on the global costs of atmospheric carbon, we estimate the economic value of carbon storage services to be between US$1,800,000 and US$3,570,000 for the whole period, with an average yearly increment of between US$86,000 and US$170,000. The results show that the ecosystem management has had a substantial climate mitigation effect. Also, the possibility of paying for ES could inform policy on the adoption of LULC to support livelihood and management choices.     

Degradation of diuron by the electro-Fenton process

The degradation of the herbicide diuron has been undertaken by electrochemical advanced oxidation in aqueous solution. This process generates catalytically hydroxyl radicals that are strong oxidizing reagents for the oxidation of organic substances. Hydroxyl radicals degrade diuron in less than 10 min. Kinetic results evidence a pseudo-first-order degradation, with a rate constant of reaction between diuron and hydroxyl radicals of 4.8x10⁹ M^–1 s^–1. Several degradation products were identified by chromatography-mass spectrometry (LC-MS). The mineralization degree of a 1.7x10^–4 M diuron solution reached 93% at 1,000 coulombs.     

Influence of weather and air pollution on the occurrence of idiopathic pulmonary embolism in the region of Sousse (Tunisia)

Environmental Science and Pollution Research - Pulmonary embolism (PE) is the most serious manifestation of thromboembolic conditions. Its incidence varies considerably between countries,...