Determinants of household fuel choices among Nigerian family heads: are there gender-differentiated impacts?

The consensus in the literature holds that female-headed households (FHHs) are more vulnerable to social and economic exclusion than male-headed households (MHHs). This paper investigates the socioeconomic determinants of household cooking fuel choices across MHHs and FHHs, using the rich Nigerian Demographic Health Survey data. Using the exogenous switching treatment effect regression (ESTER) technique, the study is able to unravel differences in socioeconomic effects of gender inequality on cooking fuel choices in Nigeria. The results validate the energy ladder hypothesis in the Nigerian case and show that the choices of dirty fuel (biomass) is more prevalent among the de-jure FHH when compared with the de-facto FHH and MHHs. Also, the probability of biomass-use among MHHs would have fallen by 1.3% if MHHs had similar socioeconomic attributes as the FHHs. In the same vain for FHHs, the probability of kerosene-use would have increased by 2%. The study observed no gender gap in kerosene-use. Thus, the established gender gap in biomass- and kerosene-use would have reduced to 6.7% and 2.8%, respectively, if the de-facto FHHs had same socioeconomic attributes as the de-jures. Considering the traditional gendered household division of labor within the households, de-jure FHHs’ energy choices may be due to limited economic opportunities that guarantees cleaner energy options.

     

Development of Thixotropic Coatings Using Dimerized Soybean Oil Fatty Acids: The Case of Polyamide of 1,2-Phenylene Diamine

Soybean oil (SBO) was dimerized and the crude dimer acid product reacted with 1,2-phenylene diamine at 210 ± 5 °C under inert atmosphere to obtain fatty polyamide (FPA). The FPA was used to modify a commercial alkyd resin by reacting a mixture of the alkyd resin with 5 wt% of FPA at 120 °C for 80 min under inert atmosphere. The FTIR spectrum of the FPA modified resin showed evidence of higher degree of H-bonding than was found for the unmodified alkyd. White gloss coatings of 15, 20, 25, and 30% solids were formulated from the modified and unmodified resins and examined for performance with respect to: leveling, sag resistance, drying time, pigment settling, skinning tendency and film hardness. Results showed that the unmodified alkyd coatings exhibited good leveling but poor sag resistance at all solid contents. In contrast, FPA modified alkyd coatings combined good leveling with high sag resistance indicating their thixotropic nature. A strong tendency to pigment settling was observed for unmodified alkyd coatings but was not observed in the FPA modified alkyd coatings. The modified alkyd coatings showed skinning while the unmodified alkyd coatings did not skin. A 30% solids coating formulation of the FPA modified resin showed shorter surface dry time but longer hard dry time than the unmodified alkyd resin coating.     

Temperature-Dependent Persistence of Human Norovirus Within Oysters (<Emphasis Type="Italic">Crassostrea virginica</Emphasis>)

This study characterizes the persistence of human norovirus in Eastern oysters (Crassostrea virginica) held at different seawater temperatures. Oysters were contaminated with human norovirus GI.1 (Norwalk strain 8FIIa) by exposing them to virus-contaminated water at 15 °C, and subsequently holding them at 7, 15, and 25 °C for up to 6 weeks. Viral RNA was extracted from oyster tissue and hemocytes and quantitated by RT-qPCR. Norovirus was detected in hemocytes and oysters held at 7 and 15 °C for 6 weeks and in hemocytes and oysters held at 25 °C for up to 2 and 4 weeks, respectively. Results confirm that NoV is quite persistent within oysters and demonstrate that cooler water temperatures extend norovirus clearance times. This study suggests a need for substantial relay times to remove norovirus from contaminated shellfish and suggests that regulatory authorities should consider the effects of water temperature after a suspected episodic norovirus-contamination event.     

Evaluation of biosurfactants for crude oil contaminated soil washing

An evaluation of the ability of aqueous biosurfactant solutions (aescin, lecithin, rhamnolipid, saponin and tannin) for possible applications in washing crude oil contaminated soil was carried out. The biosurfactants behaviour in soil-water, water-oil and oil-soil systems (such as foaming, solubilization, sorption to soil, emulsification, surface and interfacial tension) was measured and compared with a well-known chemical surfactant (sodium dodecyl sulphate, SDS) at varying concentrations. Results showed that the biosurfactants were able to remove significant amount of crude oil from the contaminated soil at different solution concentrations for instance rhamnolipid and SDS removed up to 80% oil and lecithin about 42%. The performance of water alone in crude oil removal was equally as good as those of the other biosurfactants. Oil removal was due to mobilization, caused by the reduction of surface and interfacial tensions. Solubilization and emulsification effects in oil removal were negligible due to the low crude oil solubilization of 0.11%. Therefore, these studies suggest that knowledge of surfactants' behaviour across different systems is paramount before their use in the practical application of oil removal.     

A comparison of the efficiency of different surfactants for removal of crude oil from contaminated soils

This paper presents the results from study investigating the efficiency with which different surfactants remove crude oil from contaminated soil using a soil washing process. The surfactants studied were aqueous solutions of rhamnolipid, saponin and sodium dodecyl sulfate (SDS). The efficiency of surfactants' removal was quantified and then GC/MS analysis conducted to investigate the distribution of hydrocarbons remaining on the washed soil samples compared to those on a control. The results showed that SDS removed the most crude oil from soil, followed by rhamnolipid and then saponin. However, the different surfactants showed preferences in terms of which crude oil components they removed from the contaminated soil. SDS removed more of the aliphatics than aromatic hydrocarbons whereas saponin removed the aromatic hydrocarbon preferentially to the aliphatic hydrocarbons. Clearly these results provide important information for the selection of surfactants used to remove crude oil from contaminated soils.     

High Pressure Processing and its Application to the Challenge of Virus-Contaminated Foods

High pressure processing (HPP) is an increasingly popular non-thermal food processing technology. Study of HPP’s potential to inactivate foodborne viruses has defined general pressure levels required to inactivate hepatitis A virus, norovirus surrogates, and human norovirus itself within foods such as shellfish and produce. The sensitivity of a number of different picornaviruses to HPP is variable. Experiments suggest that HPP inactivates viruses via denaturation of capsid proteins which render the virus incapable of binding to its receptor on the surface of its host cell. Beyond the primary consideration of treatment pressure level, the effects of extending treatment times, temperature of initial pressure application, and matrix composition have been identified as critical parameters for designing HPP inactivation strategies. Research described here can serve as a preliminary guide to whether a current commercial process could be effective against HuNoV or HAV.     

World supply of non fuel minerals: The geological constraints

The feasibility of trebling production of essential non fuel minerals by AD 2000 is considered in relation to a rise in world population to 6 billion (10⁹). Adequate supplies of common bulk ‘minerals’ like sand and gravel, brick clays and saline deposits, are assured, but mining will place additional strains on local environments. Ores of the metals that can be regarded as available in sufficient quantities include iron, aluminium, chromium, titanium, copper and nickel, and possibly also lead and zinc. In spite of the geological constraints imposed by complexity of geometry and genesis, reasoned resource estimates are possible for these, but they may not be feasible for rarer necessary minerals, such as those of the precious metals, mercury, niobium and flourine. The extraction of even the commonest of the non fuel minerals is conditioned by the availability of abundant energy at economic prices – this should be regarded as the critical factor.     

Crude oil contaminated soil washing in air sparging assisted stirred tank reactor using biosurfactants

This study investigated the removal of crude oil from soil using air sparging assisted stirred tank reactors. Two surfactants (rhamnolipid and sodium dodecyl sulfate, SDS) were tested and the effects of different parameters (i.e. temperature, surfactant concentrations, washing time, volume/mass ratio) were investigated under varying washing modes namely, stirring only, air sparging only and the combination of stirring and air sparging. The results showed that SDS removed more than 80% crude oil from non-weathered soil samples, whilst rhamnolipid showed similar oil removal at the third and fourth levels of the parameters tested. The oil removal ability of the seawater prepared solutions were better than those of the distilled water solutions at the first and second levels of temperature and concentration of surfactant solutions. This approach of soil washing was noted to be effective in reducing the amount of oil in soil. Therefore we suggested that a field scale test be conducted to assess the efficiency of these surfactants.     

Blood Pb Levels in pregnant Nigerian women in Abakaliki, South-Eastern Nigeria

Environmental lead (Pb) exposure and toxicity have been recognised as public health problems of global importance, affecting both the developed and developing nations. In this work, blood Pb of pregnant women that were not exposed to lead by their occupation (n?=?349), with mean ± SD age of 27.0?±?4.8 years and gestational age of 21.8?±?3.1 weeks at recruitment were determined using atomic absorption spectrophotometer. The results showed that 309 (88.5 %) of the women had a mean?±?SD blood Pb of 40.0?±?16.5 μg/dl, which is higher than the current US Centre for Disease Prevention and Control action limit (>10 μg/dl). The observed high prevalence of elevated blood Pb levels may be related to maternal low socioeconomic status. Health education is, therefore, urgently needed to sensitise the general public and the policy makers of the level of Pb exposure in Abakaliki environment and the inherent health implications. In addition to mandatory environmental lead monitoring, blood Pb screening for would-be mother is recommended, and those whose blood Pb are found elevated should be appropriately treated.     

An in-depth human health risk assessment of potentially toxic elements in highly polluted riverine soils,Příbram (Czech Republic)

Environmental Geochemistry and Health - Environmental pollution by potentially toxic element (PTE) and the associated health risks in humans are increasingly becoming a global challenge. The...