Suitability of passive sampling for the monitoring of pharmaceuticals in Finnish surface waters

The occurrence of five pharmaceuticals, consisting of four anti-inflammatory and one antiepileptic drug, was studied by passive sampling and grab sampling in northern Lake Päijänne and River Vantaa. The passive sampling was performed by using Chemcatcher® sampler with a SDB-RPS Empore disk as a receiving phase. In Lake Päijänne, the sampling was conducted during summer 2013 at four locations near the discharge point of a wastewater treatment plant and in the years 2013 and 2015 at four locations along River Vantaa. The samples were analyzed by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) in the multiple reaction monitoring mode. The concentrations of carbamazepine, diclofenac, ibuprofen, ketoprofen, and naproxen in Lake Päijänne determined by passive sampling ranged between 1.4–2.9 ng L^?1, 15–35 ng L^?1, 13–31 ng L^?1, 16–27 ng L^?1, and 3.3–32 ng L^?1, respectively. Similarly, the results in River Vantaa ranged between 1.2–40 ng L^?1, 15–65 ng L^?1, 13–33 ng L^?1, 16–31 ng L^?1, and 3.3–6.4 ng L^?1. The results suggest that the Chemcatcher passive samplers are suitable for detecting pharmaceuticals in lake and river waters.     

Overview of passive Chemcatcher sampling with SPE pretreatment suitable for the analysis of NPEOs and NPs

The European Union Water Framework Directive (WFD; 2000/60/EC) is an important piece of environmental legislation that protects rivers, lakes, coastal waters and groundwaters (EC 2000). The implementation of the WFD requires the establishment and use of novel and low-cost monitoring programmes, and several methods, e.g. passive sampling, have been developed to make the sampling process more representative compared to spot sampling. This review considers passive sampling methods focusing mainly on a passive sampler named Chemcatcher®, which has been used for monitoring several harmful compounds in aquatic environments. Also, the sample treatment and analysis of nonylphenol ethoxylates (NPEOs) and nonylphenol (NPs) from water using solid phase extraction (SPE) is briefly summarized. The procedure of Chemcatcher passive sampling is quite similar to that of the SPE extraction since it concentrates the studied compounds from water as well. After sampling, the accumulated substances are extracted from the receiving phase of the sampler. The concentrations of NPEOs and NPs are currently monitored by taking conventional spot samples; SPE can be successfully used as a pretreatment procedure. Chemcatcher® passive sampling technique is a simple and useful monitoring tool and can be applied to new chemicals, such as NPEOs and NPs in aquatic environments.     

Size-exclusion chromatographic study of ECF and TCF softwood kraft pulp bleaching liquors

Background, aims, and scope  

Currently, elemental chlorine-free (ECF) and totally chlorine-free (TCF) bleaching systems are widely used for pulp production. Low and medium molecular weight lignin break-down products are known to have harmful effects on the environment. According to some recent results, also high molecular weight (HMW) material consisting mainly of lignin and carbohydrates may cause toxic effects to the environment. For these reasons, toxicity and structure studies of HMW materials are of great importance. This investigation is a part of a larger project to obtain more structure information of HMW materials and toxicity of ECF and TCF bleaching effluents. Size-exclusion chromatography (SEC) has been commonly used for the characterization of organic macromolecules such as lignin, but to our knowledge, no reports have appeared dealing with the comparison of SEC of ECF and TCF bleaching liquors. The aim of the present study was to get more information about the molecular weight distribution (MWD) of HMW fractions of waste liquors from ECF and TCF bleaching sequences by SEC.     

Pyrolysis of humic acids from digested and composted sewage sludge

Humic acids (HAs) were extracted from four digested sewage sludge samples composted for four months, one, two and four years. HAs were pyrolyzed at three different temperatures applying both conventional and in situ methylation (ISM) pyrolysis. The pyrolysates were analyzed using gas chromatography-mass spectrometry (GC/MS). Derivatization (ISM) and pyrolysis temperature had dramatic effects on the composition and relative amounts of the pyrolysates. Among the derivatized HA fragments aliphatic compounds prevailed under all the pyrolysis conditions tested. Aromatic substances consisting mainly of guaiacyl-type compounds were detected in higher abundances only at elevated temperatures. Without ISM the contribution of aromatic structures to the total pyrogram was considerably greater than that of the aliphatics. Increase of the pyrolysis temperature from 450 degrees C to 600 degrees C had smaller effect on the proportions and composition of the compounds studied than increase from 350 degrees C to 450 degrees C.     

Characterization of the humic material formed by composting of domestic and industrial biowastes Part 1. HPLC of the cupric oxide oxidation products from humic acids

The changes induced by humification of anaerobically digested sewage sludge, source separated biowaste, and pulp mill biosludge were determined by extracting the fractions of bitumen and humic and fulvic acids from the samples of fresh and humified composts. In all cases, a distinct decrease in the amount of bitumen could be detected during humification. The amount of humic acids increased in sewage sludge and biowaste samples, but decreased in pulp mill biosludge sample during humification. The humic acids were degraded by CuO oxidation and the phenolic degradation products were analysed by reversed-phase high-performance liquid chromatography. The yield of these aromatic degradation products was in the range 0.9–2.0 % for each sample. The main phenolic degradation products were 4-hydroxybenzoic acid, vanillic acid, 4-hydroxybenzaldehyde, vanillin, syringaldehyde, and acetovanillone. Two lignin dimers, dehydrodivanillin and dehydrodiacetovanillone, were also identified.     

Polychlorinated phenols,guaiacols and catechols in environment

Emissions, bioaccumulation and possible food chain enrichment of polychlorinated phenols, guaiacols and catechols have been studied by analyses of water, snow, ash, benthic animal, fish and bird samples in Finland. Seventeen individual compounds were analyzed using authentic reference model compounds and internal standard by GC/ECD. Although the enrichment potential of the studied compounds appeared to be lower than that of the chlorinated hydrocarbons, they proved to be very general pollutants and some of them showed specific bioaccumulation to certain species and high persistency thus forming environmental hazards.     

Mutagenesis of mammalian cells in culture by chlorophenols,chlorocatechols and chloroguaiacols

The mutagenicity of 4 chlorinated phenols, 4 chlorinated catechols, 3 chlorinated guaiacols, one chloromethoxyphenol and one wood preservative mixture was studied in a mammalian cell assay, in which Chinese hamster cells V79 are used. Of the compounds studied 2,4,6-trichlorophenol, 2,3,4,6-tetrachlorophenol, 3,4,6-trichlorocatechol, 4,5,6-trichloroguaiacol and the wood preservative were mutagenic in the test system used.     

Uptake of radioiodide by Paenibacillus sp., Pseudomonas sp., Burkholderia sp. and Rhodococcus sp. isolated from a boreal nutrient-poor bog

Radionuclides, like radioiodine(~(129)I), may escape deep geological nuclear waste repositories and migrate to the surface ecosystems. In surface ecosystems, microorganisms can affect their movement. Iodide uptake of six bacterial strains belonging to the genera Paenibacillus,Pseudomonas, Burkholderia and Rhodococcus isolated from an acidic boreal nutrient-poor bog was tested. The tests were run in four different growth media at three temperatures. All bacterial strains removed iodide from the solution with the highest efficiency shown by one of the Paenibacillus strains with 99% of iodide removed from the solution in one of the used growth media. Pseudomonas, Rhodococcus and one of the two Paenibacillus strains showed highest iodide uptake in 1% yeast extract with maximum values for the distribution coefficient(K_d) ranging from 90 to 270 L/kg DW. The Burkholderia strain showed highest uptake in 1% Tryptone(maximum K_d170 L/kg DW). The Paenibacillus strain V0-1-LW showed exceptionally high uptake in 0.5% peptone + 0.25% yeast extract broth(maximum K_d 1,000,000 L/kg DW). Addition of 0.1% glucose to the 0.5% peptone + 0.25% yeast extract broth reduced iodide uptake at 4℃ and 20℃ and enhanced iodide uptake at 37℃ compared to the uptake without glucose. This indicates that the uptake of glucose and iodide may be competing processes in these bacteria. We estimated that in in situ conditions of the bog,the bacterial uptake of iodide accounts for approximately 0.1%–0.3% of the total sorption of iodide in the surface, subsurface peat, gyttja and clay layers.     

Molecular orbital studies on brominated diphenyl ethers. Part I--conformational properties

Polybrominated diphenyl ethers (PBDEs) are widely used as additive flame retardants and quantities in the environment are on the rise. Because they are structurally related to polychlorinated biphenyls and also to thyroid hormones, there is serious concern that PBDEs may pose a danger to human health. Knowledge of their conformational properties is key to assessing their environmental fate and risk. The conformational properties of PBDEs were investigated by quantum chemical methods including semiempirical self-consistent field molecular orbital (SCF-MO), ab initio SCF-MO and density functional theory (DFT). Conformational analyses of model congeners 2,2',4,6'-tetrabromodiphenyl ether and 2,3,4,4',5,6-hexabromodiphenyl ether, based on energy maps calculated by semiempirical AM1 method, may indicate that all PBDE congeners except those with the tetra-ortho-bromination are conformationally flexible (or soft) due to low energy barriers for interconversion of stable conformers. The results of the conformational analyses are in conformity with recently published X-ray crystallographic data. For comparison with the results of the semiempirical method, higher level ab initio and DFT models were applied as well. The optimized geometries all lie well inside low energy regions on the maps and thus also ascertain the semiempirical calculations. According to computed geometric parameters and net atomic charges, the model B3LYP/3-21G* seemed to give better results than B3LYP/6-31G* and HF/6-31G*.