Size-exclusion chromatographic study of ECF and TCF softwood kraft pulp bleaching liquors

Background, aims, and scope  

Currently, elemental chlorine-free (ECF) and totally chlorine-free (TCF) bleaching systems are widely used for pulp production. Low and medium molecular weight lignin break-down products are known to have harmful effects on the environment. According to some recent results, also high molecular weight (HMW) material consisting mainly of lignin and carbohydrates may cause toxic effects to the environment. For these reasons, toxicity and structure studies of HMW materials are of great importance. This investigation is a part of a larger project to obtain more structure information of HMW materials and toxicity of ECF and TCF bleaching effluents. Size-exclusion chromatography (SEC) has been commonly used for the characterization of organic macromolecules such as lignin, but to our knowledge, no reports have appeared dealing with the comparison of SEC of ECF and TCF bleaching liquors. The aim of the present study was to get more information about the molecular weight distribution (MWD) of HMW fractions of waste liquors from ECF and TCF bleaching sequences by SEC.     

Heavy metals in bottom sediments of Lake Umbozero in Murmansk Region, Russia

Sediment cores collected from different locations of Lake Umbozero were studied with respect to concentration and mobility of trace and heavy metals Co, Cu, Fe, Mn, Ni, Pb, U, and Zn. Lake Umbozero is the second largest lake in the Murmansk Region and subjected to contamination by air-borne emissions and river transportation from the nearby metallurgical and mining industries. Unlike its neighboring, more industry-prone Lake Imandra, Lake Umbozero is relatively unexplored with respect to its state of pollution. In our study, metal distribution in sediments was found to vary with respect to the cores, although in general the concentrations were at the same level throughout the lake indicating uniform horizontal distribution of metals. When compared to Lake Imandra, the concentrations of most of the metals studied were significantly lower and represented the levels in sediments measured in lakes of Kola Peninsula located further off from industrial pollutant sources. An exception was Pb the concentration of which was at the same level as in Lake Imandra, probably due to long-distance transport. Sediment layers were subjected to four-step sequential extraction procedure to reveal the metal distribution in soluble, exchangeable, acid-soluble, and residual fractions. Indicative of their potential higher lability, Mn, U, and Zn were generally found in exchangeable fraction; as also Mn and U extensively in the acid-soluble fraction.     

Risk Assessment in the Working Environment in Estonia

The first step to chart hazards in the working environment in Estonia (labour force: 0.65 million) was taken by the National Board of Health Protection in the beginning of 1996.

The existing chemical, physical, and biological agents in the working environment were investigated with the help of local health inspectors in all counties. An identification of hazards and workers at risk was carried out. The results of the analysis showed that 16% of Estonian industrial workers are exposed to different hazards: 20,000 persons are exposed to noise, 11,000 are working in the conditions of vibration, 10,000 are affected by unsatisfactory microclimate, 6,000 complain about long-lasting work in a compulsory posture, the overexertion of eyes is suffered by 5,500 persons, and physical overload by 3,500 workers. In the group of chemical hazards the greatest numbers of workers are exposed to organic dust (6,500) and welding aerosols (5,400), followed by petroleum products (2,700), and oil-shale dust (4,300). The measurements of working conditions showed that an average of 30.3% of the results are above the standards. Proposals for the improvement of the situation in occupational safety and health are presented.     

A Simple and Flexible Risk Assessment Method in the Work Environment

The existing risk assessment models in the work environment (on the basis of Standard No. BS 8800:1996; British Standards Institution, 1996) contain the need to determine the probability of the occurrence and the severity of consequences of the influence of hazardous factors on the worker. The determination of the probabilities of the influence of hazards (noise, vibration, chemicals, etc.) is complicated.

The authors of this article have developed a simple risk assessment method that does not contain the probabilities. The method is based on a 2-step model that could be enlarged into a 6-step model.

The implementation possibilities of the model are presented. The existing norms in the work environment in Estonia were analysed and the safety level of a wood-processing factory was determined.     

Bioluminescent yeast assays for detecting estrogenic and androgenic activity in different matrices

In this paper we describe the construction and use of a set of bioluminescent yeast strains for the detection of compounds that can affect androgen or estrogen receptor mediated hormonal signalling. The set includes Saccharomyces cerevisiae strains expressing human androgen receptor (AR), estrogen receptor alpha (ERalpha) or estrogen receptor beta (ERbeta), along with firefly luciferase controlled by a respective hormone responsive promoter. A constitutively luminescent strain was included in the set for determining the cytotoxicity of the sample. Yeast cells were incubated with pure chemicals or complex samples for 2.5 h, after which the signal could be detected from the cell-sample mixture after simply adding the D-luciferin substrate. The assays could be completed in one day and they required no cell lysis or centrifugation steps, which makes them suitable for high-throughput analysis of samples. Due to a short incubation time the assays are directly applicable to different sample matrices, requiring no pretreatment of the samples. The assays were used to assess the hormonal activity in moisturizing lotions as an example of a complex sample matrix known to contain endocrine disrupting chemicals. Six out of eight tested moisturisers showed high estrogenic activity, whereas no androgenic activity was observed in the samples.     

Biodegradation of chemicals in a standardized test and in environmental conditions

The estimation of biodegradation rates is an important source of uncertainty in chemical risk assessment. The existing OECD tests for ready biodegradability have been developed to devise screening methods to determine whether a chemical is potentially easily biodegradable, rather than to predict the actual rate, of biodegradation in the environment. However, risk assessment needs degradation rates. In practice these rates are often estimated (default values) from ready biodegradability tests. These tests have many compromising arbitrary features compared to the situation in the real environment. One important difference is the concentration of the chemical. In wastewater treatment or in the environment many chemicals are present at ng l(-1) to microg l(-1) levels whereas in the tests the concentrations exceed 10-400 mg carbon per litre. These different concentrations of the chemical will lead to different growth kinetics and hence different biodegradation rates. At high concentrations the chemical, if it is degradable, can serve as a primary substrate and competent microorganisms will grow exponentially, resulting in a sigmoid biodegradation curve. At low environmental concentrations the chemical does not serve as a primary substrate, and therefore does not support significant growth of the degraders, and the substrate has a linear biodegradation rate. In this study the biodegradation rates of two reference chemicals, aniline and 4-chloroaniline, were compared in a standard method and in more realistic conditions at low concentrations, using 14C-labelled substances and different sources of inocula. Biomass evolution during the tests was monitored by adenosine triphosphate measurement and also on the basis of the residual 14C-activity in the particulate matter. The results partly support the thesis that low concentrations lead to different biodegradation kinetics compared to the concentrations used in the standard tests. Furthermore the biodegradation rates of the chemicals studied, particularly of 4-chloroaniline, in Finnish natural waters appeared to be lower than those reported in some other countries.     

Multi‐wave,multi‐variable models of job insecurity: applying different scales in studying the stability of job insecurity

The study had two specific targets: first, to examine the stability of job insecurity by utilizing three‐year longitudinal data (n = 109) collected in Finland and, second, to clarify psychometric properties of four job insecurity scales, i.e., the global scale, the importance scale, the probability scale and the powerlessness scale. The study was carried out by means of questionnaires, which were answered on three occasions. Analyses were conducted using multi‐wave, multi‐variable models which were estimated and tested via the LISREL program. Generally, the results showed that job insecurity remained relatively stable during the follow‐up period, although there were some variations in the stability as well as in the psychometric properties of the four job insecurity scales examined. More specifically, three of the scales studied showed good psychometric properties, whereas the probability scale could not be estimated longitudinally. Furthermore, working organization and time had effects on the level of job insecurity measured via the different scales. Copyright © 2001 John Wiley & Sons, Ltd.     

Cs,Pu and Am in bottom sediments and surface water of Lake Päijänne,Finland

The concentrations and vertical distribution of ^239,240Pu, ²⁴¹Am and ¹³⁷Cs in the bottom sediments and water samples of Lake Päijänne were investigated. This lake is important, since the Päijänne area received a significant deposition from the Chernobyl fallout. Furthermore Lake Päijänne is the raw water source for the Helsinki metropolitan area. In addition no previous data on the distribution of plutonium and americium in the sediment profiles of Lake Päijänne exist. Only data covering the surface layer (0–1 cm) of the sediments are previously available. In the sediments the average total activities were 45 ± 15 Bq/m² and 20 ± 7 Bq/m² for ^239,240Pu and ²⁴¹Am, respectively. The average ²⁴¹Am/^239,240Pu ratio was 0.45 ± 0.14. The ²⁴¹Am/^239,240Pu ratio is lowest in the surface layer of the sediments and increases as a function of depth. The ²³⁸Pu/^239,240Pu ratio of the sediment samples varied between 0.012 ± 0.025 and 0.162 ± 0.079, decreasing as a function of depth. The average activity in water was 4.9 ± 0.9 mBq/m³ and 4.1 ± 0.2 mBq/m³ for ^239,240Pu and ²⁴¹Am, respectively. The ²⁴¹Am/^239,240Pu ratio of water samples was 0.82 ± 0.17. ^239,240Pu originating from the Chernobyl fallout calculated from the average total activities covers approximately 1.95 ± 0.01% of the total ^239,240Pu activity in the bottom sediments. The average total ¹³⁷Cs activity of sediment profiles was 100 ± 15 kBq/m² and 19.3 ± 1.4 Bq/m³ in water samples.