Lead removal from foundry waste by solvent extraction

Solvent extraction is used to reduce lead concentrations from millpond wastewater solids, a type of foundry process waste. Toluene and toluene mixed with di-(2-ethyl-hexyl) phosphoric acid (HDEHP) have been tried as leaching solvents. Toluene is ineffective as a solvent in extracting lead, but the toluene-HDEHP mixture effectively removes lead from solid foundry waste. The effects of the HDEHP concentration, the contact time, and the amount of solvent used on lead extraction have been investigated. The mass transfer process is rapid: contact time of 1/2 hour has been found to be sufficient to accomplish the leaching process. The concentration of HDEHP significantly impacts lead removal. The optimum concentration of HDEHP is determined to range from 0.05 to 0.1 mol/l. The Toxicity Characteristic Leaching Procedure (TCLP) test of the treated samples gives leachable lead in much lower quantities than those found in the untreated samples. Thus the solvent extraction process appears to be an effective method to significantly reduce the lead content of millpond wastewater solids.     

The hardrock minerals industry and the landscape architect

The landscape architecture profession is a source of creative thinking and planning which is relatively untapped within the mining industry in the United States of America. The landscape architect has been active in European operations for years as indicated by the four examples presented. The landscape architect can provide an important interface with mine design and engineering and environmental affairs. To initiate this interface within the United States, and increase its effectiveness, six objectives are presented and discussed.     

An investigation into the acid content of aerosols in the ambient air at the Taj Mahal, Agra

A chemical analysis of suspended particulate matter (SPM) collected near the world famous Taj Mahal monument at Agra has been carried out. SPM samples collected on glass fibre filters were analysed for water-soluble sulphate, nitrate, chloride and ammonium ions. The data were derived from over 200 samples (each of 24 h), collected continuously during the winter periods (October through to March) of 1984-1985 and 1985-1986. The SO(4)(2-) and NO(3)(-) components are acidic in nature causing corrosion and effects on visibility, and so were studied in more detail. Mean values for SO(4)(2-) and NO(3)(-) derived from two-year data are 7.2 microg m(-3) and 8.2 microg m(-3), respectively. The SO(4)(2-)/SO(2) and NO(3)(-)/NO(2) ratiosobserved indicate faster conversion of SO(2) to SO(4)(2-) than NO(2) to NO(3)(-), the maximum levels being in January. Thus, both SO(4)(2-) and NO(3)(-) results appear to offer more promising indices of air quality than do SPM data alone.     

Chorionic villus sampling utilization following reports of a possible association with fetal limb defects

Prenatal diagnosis choices were reviewed in 473 women who presented for genetic counselling prior to 11 weeks' gestation for the indication of advanced maternal age. Group A consisted of 336 patients who were unaware of a possible association between chorionic villus sampling (CVS) and limb defects. Group B consisted of 137 patients who were provided this information. Fifty-one per cent of patients in group A and 45 per cent of patients in group B chose CVS. This difference was not significant by χ² analysis (P = 0·7). Patterns of prenatal diagnosis procedure utilization from 1987 to 1992 revealed a significant reduction in CVS utilization accompanied by a corresponding increase in amniocentesis after the association between CVS and limb defects was publicized. Referrals for CVS counselling also significantly declined. However, acceptance rates did not change for those patients who received genetic counselling. First-trimester genetic counselling, including a discussion regarding a possible association between CVS and limb defects, helps patients make informed decisions concerning prenatal diagnosis options, and, in our population, resulted in no change in CVS acceptance rates.     

Socio-economic impact management: programme design and implementation considerations

While larger mineral resource development projects offer new jobs and provide a stimulus to the economy of the area where they are sited, they may also pose problems in rural areas associated with rapid population growth. The purpose of an impact management programme is to anticipate and alleviate project effects that are generally perceived as undesirable and to enhance effects that are beneficial to site area communities. While the effective management of project effects is the end towards which all impact assessment efforts are directed, an integrated approach to impact management has been notably lacking. This paper suggests a systems framework for meeting this need by: (1) reviewing the need for impact management efforts; (2) discussing the objectives of, and considerations in, designing impact management programmes; (3) presenting a conceptual framework for, and key components of, such a programme; and (4) suggesting an approach for implementing such a system as an integral part of the project development process.     

White-tailed deer movement and distribution about surface coal mines in West Virginia,USA

Deer movements around surface coal mines were investigated in Preston Country, West Virginia, USA. Seventy-two deer crossings were counted on 29 surface mines with only 8% found on highwalls with more than 20% rock or stone. Thus, although slope was important, the percentage of dirt on the highwall determined use as a crossing location for deer. The average distance between all deer crossing was 209.7 m but the distance between the end of the highwall and the nearest highwall crossing was 248.7 m indicating reluctance of deer to cross mines when they could walk around them. Winter snow track counts showed fewer deer within 90 m of the top edge of the highwall. Four land bridges traversed the highwall and were heavily utilized by deer, especially in March, April, May, October and November. The surface mine bench was used as a fawn bedding area, but little feeding occurred on this portion of the mine.