Global evaluation of the effects of agriculture and water management adaptations on the water-stressed population

Fresh water is one of the most important resources required for human existence, and ensuring its stable supply is a critical issue for sustainable development. The effects of a general set of agriculture and water management adaptations on the size of the world’s water-stressed population were assessed for a specific but consistent scenario on socio-economic development and climate change during the 21st century. To maintain consistency with agricultural land use change, we developed a grid-based water supply–demand model integrated with an agro-land use model and evaluated the water-stressed population using a water withdrawals-to-availability ratio for river basins. Our evaluation shows that, if no adaptation options are implemented, the world’s water-stressed population will increase from 1.8 billion in 2000 to about 3.3 billion in 2050, and then remain fairly constant. The population and economic growth rather than climate change will be dominant factors of this increase. Significant increase in the water-stressed population will occur in regions such as North Africa and the Middle East, India, Other South Asia, China and Southeast Asia. The key adaptation options differ by region, depending on dominant crops, increase in crop demand and so on. For instance, ‘improvement of irrigation efficiency’ and ‘enhancement of reclamation water’ seem to be one of important options to reduce the water stress in Southeast Asia, and North Africa and the Middle East, respectively. The worldwide implementation of adaptation options could decrease the water-stressed population by about 5 % and 7–17 %, relative to the scenario without adaptations, in 2050 and 2100, respectively.     

Improvement of reporter gene assay for highly sensitive dioxin detection using protoplastic yeast with inactivation of CWP and PDR genes

Environmental Science and Pollution Research - A yeast reporter gene assay system with improved performance for dioxin detection was established. Since yeast reporter gene assays are relatively...     

Risk of Hunger Under Climate Change, Social Disparity, and Agroproductivity Scenarios

Considering the projected population growth in the twenty-first century, some studies have indicated that global warming may have negative impacts on the risk of hunger. These conclusions were derived based on assumptions related to social and technological scenarios that involve substantial and influential uncertainties. In this paper, focusing on agrotechnology and food access disparity, we analyzed food availability and risk of hunger under the combined scenarios of food demands and agroproductivity with and without climate change by 2100 for the B2 scenario in the Special Report on Emissions Scenarios. The results of this study suggest that (1) future food demand can be satisfied globally under all assumed combined scenarios, and (2) a reduction of food access disparity and increased progress in productivity are just as important as climate change mitigation for reducing the risk of hunger.     

Application of rotating cylinder method for ecotoxicological evaluation of antifouling paints

The environmental impact of two biocide-free antifouling paints, fluoropolymer and silicone types, painted on a test cylinder was assessed using a battery of ecotoxicity test and chemical analyses for organic micro-pollutants such as perfluoroalkyl substances (PFAS). A biocide paint containing zinc pyrithione (ZnPT₂) and cuprous oxide was assessed as a positive control. A standardized laboratory rotating-cylinder method using each test cylinder with artificial seawater was performed for 45 days. After 1?h rotation, the leaked seawater was subjected for bioassay and chemical analyses twice weekly. The seawater extracts from the biocide paint showed adverse effects on bacteria, algae, and crustaceans, but those from the biocide-free paints did not. The leakage seawater from biocide-free paints, after 7-day continuous rotation, contained the same concentration levels of PFAS as blank seawater used to conduct the tests. Thus, no significant toxicities of the biocide-free paints were found under the conditions of this study. Simultaneous analysis of ZnPT₂ and copper pyrithione (CuPT₂) was developed using an HPLC with a polymeric resin column, showing that ZnPT₂ was converted to CuPT₂ by trans-chelation in the leakage seawater from the positive control paint. The experimental results using a laboratory rotating-cylinder method demonstrated that biocide-free paints did not markedly affect three species tested and no PFAS was detected. In contrast, biocide paint was significantly toxic to test species and toxicity of the extract on bacteria was partly responsible for CuPT₂ produced in leakage seawater. Thus, a laboratory rotating-cylinder method may be applied for ecotoxicological assessment of antifouling paints.     

Effects of different mobilities of leaf and woody litters on litter carbon dynamics in arid ecosystems in Western Australia

Afforestation of arid land is a promising countermeasure against global warming. We had previously found, through modeling and mass balance analyses of an arid land afforestation experimental project in Western Australia, that a significant amount of litter could have been physically removed from the floors of natural forests. In order to analyze litter carbon dynamics in depth, we investigated the actual mobility of litter in several natural forests in Sturt Meadows in an arid region of Western Australia, and estimated the difference between the removal rate of leaf and woody (twigs and branches) litter on the forest floor. Then we redeveloped a litter carbon dynamics model by incorporating physical removal of litter to show the different mobilities of leaf and woody litters. We also analyzed carbon balances and the effect of differential litter mobility on litter carbon dynamics. Except for twigs in one plot in a high density forest, 29–100% of leaf litter and 10–100% of woody litter was removed annually, demonstrating the physical removal of litter in these natural forests. The main cause of litter removal was wind, not flooding. Decreases in leaf and woody litters could be approximated as first order decay functions in most plots; first order decay or disappearance rate constants were then determined. Estimated disappearance rate constants of leaf and woody litter ranged from 0.19 to 11 and 0.11–12 year⁻¹, respectively; most of the constants ranged from 0.19 to 2.0 and 0.11–0.74 year⁻¹, respectively. Based on the disappearance rate constant, the mobility of woody litter was estimated to be roughly 20% that of leaf litter, confirming that climatic factors move leaves more easily than twigs. The improved model, which took into account the different mobilities of leaf and woody litters, showed that annual physical removal of litter reached 70–82% of the annual litter fall in Acacia aneura forests, and that roughly 40–60% of the existing litter was removed annually from all sites. Incorporating into the model the difference in mobilities of leaf and woody litters showed that the ratio of annual litter removal to annual litter fall increased about 10% points compared with the assumption of that both litter types had equal mobility.     

Neonatal outcomes of congenital diaphragmatic hernia in full term versus early term deliveries: A systematic review and meta-analysis

This systematic review and meta-analysis aimed to review the optimal timing of delivery at term for neonates with prenatally diagnosed congenital diaphragmatic hernia (CDH). We reviewed the literature up to December 19, 2022 using MEDLINE and the Cochrane Library databases. The inclusion criteria were original articles, comparative studies of CDH neonates delivered at an early term (37–38 weeks of gestation) and at full term (39 weeks of gestation or later), and comparative studies investigating outcomes of CDH neonates. Six studies met the inclusion criteria, including 985 neonates delivered at an early term and 629 delivered at full term. The cumulative rate of survival to discharge showed no significant difference between CDH neonates delivered at an early term (395/515; 76.7%) or at full term (345/467; 73.9%) (risk ratio [RR] 1.01; 95% confidence interval [CI], 0.89–1.16; p = 0.85). Furthermore, the number of neonates requiring oxygen therapy at discharge was not significantly different between CDH neonates delivered at an early term (32/370; 8.6%) and at full term (14/154; 9.1%) (RR, 0.99; 95% CI, 0.36–2.70; p = 0.99). Therefore, the optimal timing of delivery at term for neonates with CDH remains unclear.     

Photodecomposition of humic acid and natural organic matter in swamp water using a TiO2-coated ceramic foam filter: Potential for the formation of disinfection byproducts

This paper reports on the photodecomposition of aqueous humic acid (HA) by a TiO₂-coated ceramic foam filter (TCF) reactor and on the potential for the formation of disinfection byproducts (DBPs) upon chlorination of the photocatalytically treated solutions. This photocatalytic reactor can also be applied to the removal of natural organic matter (NOM) in swamp waters. The proposed photocatalytic reaction system was operated as per standardized methodologies. First, the ability of the TCF to decompose HA (a representative compound of NOM) was evaluated from the changes in the total organic carbon (TOC) and UV₂₅₄ with the reaction time. Remarkably, TOC removal and UV₂₅₄ values ranging from 44% to 61% and from 60% to 83%, respectively, were achieved. The potential for the formation of DBPs (total trihalomethane and total haloacetic acid) by chlorination of the phototreated solution was strongly dependent on the TOC removal and UV₂₅₄ values in the solution. The degree of photodecomposition of NOMs in the swamp water samples and the DBP formation potential showed similar trends as in the case of the standard solutions containing HA. The method used in this study could be effectively used to evaluate the efficiency of TCF for reducing HA and NOM, while suppressing the formation of DBP products.     

Effect of 17beta-estradiol on the reproduction of Japanese medaka (Oryzias latipes)

Estrogenic compounds such as 17beta-estradiol (E2) and its analogs are present in the aquatic environment and can adversely affect the reproductive systems of aquatic organisms. Although E2 has been detected at a maximum concentration of 64 ng/l in effluents of sewage treatment works (STWs), few reports address the associated effects on reproduction in fish. Therefore, we exposed adult medaka (Oryzias latipes) to mean measured E2 concentrations of 29.3, 55.7, 116, 227, and 463 ng/l for 21 d and assessed the effects on the egg number and fertility of paired medaka during the exposure period. In addition, we determined the hepatic vitellogenin (Vtg) concentration and histologically assessed the gonads of these fish. The number of egg produced and fertility of the paired medaka exposed to 463 ng/l E2 were significantly less compared with those of the control fish. Males in all treatment groups had developed testis-ova. Males treated with E2 concentrations = 55.7 ng/l contained relating great concentrations of hepatic Vtg. Therefore, although only the greatest E2 concentration tested in our study affected fecundity and fertility, effects of E2 were observed on induction of Vtg and testis-ova in male medaka exposed to environmentally relevant concentrations of E2.     

Production and characterization of KOH-activated carbon derived from polychlorinated biphenyl residue generated by the sodium dispersion process

Polychlorinated biphenyl (PCB) residues from the sodium dispersion (SD) process were employed as the raw materials for the production of activated carbon using KOH activation. The pore properties, such as the specific surface area and pore size distribution, were characterized using the Barrett–Joyner–Halenda method and the Horvath–Kawazoe method based on the N₂ adsorption isotherm at 77 K. The activated carbon produced showed similar adsorption capacities and specific surface areas to the commercially available product. The effects of the activation conditions on the porosity of the activated carbon produced were studied. The most significant factor affecting the specific surface proved to be the activation temperature. The activated carbon produced from PCB residues from the high-temperature (423–443 K) SD process had a binary pore size distribution well developed in the 4 nm region and in the micropore region. The pore structure of the carbon produced from PCB residues from the low-temperature (333–393 K) SD process had a wide range of micropores and mesopores.