Inhibition of BPA degradation by serum as a hydroxyl radical scavenger and an Fe trapping agent in Fenton process

Identification of reactive oxygen species (ROS) that contribute to bisphenol-A (BPA) degradation and monitoring of BPA at various concentrations in human serum under Fenton reaction conditions were carried out using electron spin resonance (ESR) spectrophotometry and high performance liquid chromatography with electrochemical detection (HPLC-ECD). BPA recovery decreased with increasing Fe concentration and time, both with a Fenton reaction using Fe(II), and with a Fenton-like reaction using Fe(III). In these reactions, BPA dose-dependently decreased the intensity of 5,5-dimethyl-1-pyrroline-N-oxide (DMPO)-*OH, up to 1 microg/ml BPA, and no change in DMPO-O(2)(?-) intensity was observed. The decrease in BPA recovery was inhibited strongly by addition of serum under Fenton-like reaction conditions, and there was a negative correlation between turbidity and BPA recovery. To clarify the mechanism by which serum inhibits BPA degradation, the relationship between BPA recovery and sample turbidity, and characteristics of the precipitates were investigated using spectrophotometry and X-ray analysis. The precipitate formed in the serum-containing sample consisted of C, S, O, P and Fe. BPA degradation was also inhibited under Fenton-like reaction conditions in phosphate buffered saline (PBS), and a precipitate consisting of O, P, and Fe appeared. Precipitates also appeared in authentic albumin and gamma-globulin when sulfate was added with Fenton reagents. After precipitate removal, both Fe and protein concentrations in the supernatant of the protein solutions with sulfate decreased with increasing Fe addition. We demonstrate here that hydroxyl radical generation from Fenton or Fenton-like reactions can degrade BPA, and that serum strongly inhibits BPA degradation, not only by competing with BPA for hydroxyl radicals, but also by trapping Fe with oxidative components present in the serum.     

Effects of introducing energy recovery processes to the municipal solid waste management system in Ulaanbaatar,Mongolia

Currently, most developing countries have not set up municipal solid waste management systems with a view of recovering energy from waste or reducing greenhouse gas emissions. In this article, we have studied the possible effects of introducing three energy recovery processes either as a single or combination approach, refuse derived fuel production,incineration and waste power generation, and methane gas recovery from landfill and power generation in Ulaanbaatar, Mongolia, as a case study. We concluded that incineration process is the most suitable as first introduction of energy recovery. To operate it efficiently,3Rs strategies need to be promoted. And then, RDF production which is made of waste papers and plastics in high level of sorting may be considered as the second step of energy recovery.However, safety control and marketability of RDF will be required at that moment.     

Effects of introducing energy recovery processes to the municipal solid waste management system in Ulaanbaatar,Mongolia

Currently, most developing countries have not set up municipal solid waste management systems with a view of recovering energy from waste or reducing greenhouse gas emissions. In this article, we have studied the possible effects of introducing three energy recovery processes either as a single or combination approach, refuse derived fuel production, incineration and waste power generation, and methane gas recovery from landfill and power generation in Ulaanbaatar, Mongolia, as a case study. We concluded that incineration process is the most suitable as first introduction of energy recovery. To operate it efficiently, 3Rs strategies need to be promoted. And then, RDF production which is made of waste papers and plastics in high level of sorting may be considered as the second step of energy recovery. However, safety control and marketability of RDF will be required at that moment.     

Genotoxicity of substances extracted from construction materials

Construction waste such as road pavement and concrete is estimated to constitute about 50% of the total industrial waste in Japan, and the recycling of such material has recently become a prominent topic among construction engineers. It has also been suggested that various types of industrial waste be utilized as components of construction materials. This paper investigates the environmental safety of certain materials in terms of the elutions and genotoxicities of these substances. The substances extracted from some materials, such as emulsifier, ash, and sediment, were found to have genotoxic characteristics. The dose-related responses of the various materials and their genotoxic strengths are shown. Received: June 16, 1998 / Accepted: September 7, 1999     

A quantitative risk assessment of waterborne infectious disease in the inundation area of a tropical monsoon region

Flooding and inundation are annual events that occur during the rainy season in Cambodia, and inundation has a strong relationship with human health. This study simulated the coliform bacteria distribution using a hydraulic model and estimated the impact of inundation on public health using a dose–response model. The model parameters were calibrated using field survey data from Cambodia and obtained good agreement with the coliform group count distribution. The results suggest that the impact of inundation on human health is most noticeable in residential areas. The annual average risk of infection during medium-sized flood events is 0.21. The risk due to groundwater use ranges from 0.12 to 0.17 in inundation areas and reaches as high as 0.23 outside the inundation areas. The risk attributed to groundwater use is therefore higher than that for surface water use (0.02–0.06), except in densely populated areas at the city center. There is a high risk for infection with waterborne disease in residential areas, and the annual average risk during small flood events is 0.94. An assessment of possible countermeasures to reduce the risk shows that the control of inundation may bring more risk to public health in Cambodia. Shallower inundation water (<0.3 m) leads to a higher risk of infection, but if the depth is greater than 2 m, the risk is low in residential areas. The simulated results explain the spatial distributions of infection risk,, which are vitally important for determining the highest priority places with relatively high risk and will be helpful for decision makers when considering the implementation of countermeasures.     

Development of a catalytic dehalogenation (Cl,Br) process for municipal waste plastic-derived oil

Dehalogenation is a key technology in the feedstock recycling of mixed halogenated waste plastics. In this study, two different methods were used to clarify the effectiveness of our proposed catalytic dehalogenation process using various carbon composites of iron oxides and calcium carbonate as the catalyst/sorbent. The first approach (a two-step process) was to develop a process for the thermal degradation of mixed halogenated waste plastics, and also develop dehalogenation catalysts for the catalytic dehydrochlorination of organic chlorine compounds from mixed plastic-derived oil containing polyvinyl chloride (PVC) using a fixed-bed flow-type reactor. The second approach (a single-step process) was the simultaneous degradation and dehalogenation of chlorinated (PVC) and brominated (plastic containing brominated flame retardant, HIPS–Br) mixed plastics into halogen-free liquid products. We report on a catalytic dehalogenation process for the chlorinated and brominated organic compounds formed by the pyrolysis of PVC and brominated flame retardant (HIPS–Br) mixed waste plastics [(polyethylene (PE), polypropylene (PP), and polystyrene (PS)], and also other plastics. During dehydrohalogenation, the iron- and calcium-based catalysts were transformed into their corresponding halides, which are also very active in the dehydrohalogenation of organic halogenated compounds. The halogen-free plastic-derived oil (PDO) can be used as a fuel oil or feedstock in refineries.     

Effects of introducing energy recovery processes to the municipal solid waste management system in Ulaanbaatar, Mongolia

Currently, most developing countries have not set up municipal solid waste management systemswith a viewof recovering energy fromwaste or reducing greenhouse gasemissions. In this article, we have studied the possible effects of introducing three energy recovery processes either as a single or combination approach, refuse derived fuel production, incineration and waste power generation, and methane gas recovery from landfill and power generation in Ulaanbaatar, Mongolia, as a case study. We concluded that incineration process is the most suitable as first introduction of energy recovery. To operate it efficiently, 3Rs strategies need to be promoted. And then, RDF production which is made of waste papers and plastics in high level of sortingmay be considered as the second step of energy recovery. However, safety control and marketability of RDF will be required at that moment.     

Oxidation catalyst of iron oxide suppressing dioxin formation in polyethylene combustion

A new iron oxide catalyst, which has a superior oxidation activity in carbon monoxide and polyethylene (PE) combustion, was synthesized by an aqueous solution reaction. Catalytic oxidation of carbon monoxide over six kinds of hematite obtained from the goethite was done using a microcatalytic pulse reactor, and the composition of the hematite with the highest oxidation activity was determined. With the aim of suppressing dioxin formation on combustion, incineration tests of solid wastes in PE refuse bags with and without the goethite were carried out using a commercial semibatch-type incinerator with a combustion chamber of 6.2 m³. The result confirmed that the concentration of dioxins in the flue gas decreased considerably when the refuse was incinerated in PE bags manufactured with goethite. Received: July 24, 2000 / Accepted: October 18, 2000     

Tracer transport model at Japan meteorological agency and its application to the ETEX data

This paper describes the JMA tracer transport model and its sensitivity to model physics and initial conditions by using the ETEX data. Compared with observations, the model overestimates ground-level concentration in the early stage within about one day from the emission, possibly due to underestimation of vertical diffusion. In the early stage, the enhanced vertical diffusion effectively transports the tracer upward and decreases the ground-level concentration, while in the later stage, it enhances downward transports from the upper layer and increases the ground-level concentration. A conceptual model is given for understanding the vertical transport due to vertical diffusion. The horizontal diffusion introduced to the model has preferable impacts on forecasts especially in the early stage. Finally, we discuss the predictability of this model based on sensitivity to initial conditions of emission time and height.     

Hydrodynamic forces on emergent cylinders in non-uniform flow

Environmental Fluid Mechanics - The main objective of conducting numerical simulations of flows in rivers with vegetation is to investigate the complex flow dynamics involved in non-equilibrium...