排序方式: 共有3条查询结果,搜索用时 15 毫秒
1
1.
Pyrolytic characteristics of sewage sludge 总被引:7,自引:0,他引:7
Thipkhunthod P Meeyoo V Rangsunvigit P Kitiyanan B Siemanond K Rirksomboon T 《Chemosphere》2006,64(6):955-962
In this study, a number of different sewage sludge including sludge samples from industrial and hospital wastewater treatment plants were characterized for pyrolysis behavior by means of thermogravimetric analysis up to 800 degrees C. According to the thermogravimetric results, five different types of mass loss behaviors were observed depending on the nature of the sludge used. Typical main decomposition steps occurred between 250 and 550 degrees C although some still decomposed at higher temperatures. The first group (Types I, II and III) was identified by main decomposition at approximately 300 degrees C and possible second reaction at higher temperature. Differences in the behavior may be due to different components in the sludge both quantitatively and qualitatively. The second group (Types IV and V), which rarely found, has unusual properties. DTG peaks were found at 293, 388 and 481 degrees C for Type IV and 255 and 397 degrees C for Type V. Kinetics of sludge decomposition can be described by either pseudo single or multicomponent overall models (PSOM or PMOM). The activation energy of the first reaction, corresponding to the main pyrolysis typically at 300 degrees C, was rather constant (between 68 and 77 kJ mol(-1)) while those of second and third reactions were varied in the range of 85-185 kJ mol(-1). The typical order of pyrolysis reaction was in the range of 1.1-2.1. The pyrolysis gases were composed of both saturated and unsaturated light hydrocarbons, carbon dioxide, ethanol and chloromethane. Most products, however, evolve at a quite similar temperature regardless of the sludge type. 相似文献
2.
In this study, the effect of CO(2) on the thermal conversion of sewage sludge was investigated by means of the thermogravimetric analysis and the batch-type thermal process. The results showed that the kinetics of sewage sludge during thermal treatment under both N(2) and CO(2) atmospheres are quite similar and can be described by a pseudo bi-component separated state model (PBSM). It was, however, noticed that under CO(2) atmosphere, the first reaction was significantly accelerated whereas the secondary reaction temperature was shifted to a lower temperature. The apparent activation energies for the first decomposition reaction under both N(2) and CO(2) atmosphere, corresponding to the main decomposition typically at 305 degrees C were similarly attained at ca. 72 kJ mol(-1), while that of the second decomposition reaction was found to decrease from 154 to 104 kJ mol(-1) under CO(2) atmosphere. The typical reaction order of the decomposition under both N(2) and CO(2) atmosphere was in the range of 1.0-1.5. The solid yield was slightly reduced while the gas and liquid yields were somewhat improved in the presence of CO(2). Furthermore, CO(2) was found to influence the liquid product by increasing the oxygenated compounds and lessening the aliphatic compounds through the insertion of CO(2) to the unsaturated compounds resulting in the carboxylics and the ketones formation. 相似文献
3.
Effect of Metal Compounds and Experimental Conditions on Distribution of Products from PVC Pyrolysis
Jatuphorn Wootthikanokkhan Adisak Jaturapiree Vissanu Meeyoo 《Journal of Polymers and the Environment》2003,11(1):1-6
Effects of heating rate, gas flow rate, and type of metal compounds on the amount of hydrogen chloride, liquid, gas, and solid pyrolyzate obtained from the pyrolysis of poly(vinyl chloride) (PVC) were investigated. The pyrolysis experiments were carried out in both a thermogravimetric analysis (TGA) instrument and a fixed-bed reactor. Products from the fixed-bed reactor were collected and analyzed by using Fourier transform infrared spectroscopy (FTIR), gas chromatography-mass spectroscopy (GC-MS), titration technique, and gravimetry. It was found that heating rate in the TGA experiments did not affect the amount of released hydrogen chloride. However, the TGA profiles significantly changed with the rate. The onset of dehydrochlorination increased with the rate. In addition, as the heating rate was increased from 10 to 20°C/min, there was no solid residue left. The amount of liquid pyrolyzate obtained from the fixed-bed reactor can be either increased or decreased with the heating rate, depending on the gas flow rate and the actual residence time in the reactor. FTIR and GC-MS analysis indicated that the liquid pyrolyzates were mainly benzene, toluene, and styrene. By comparing the efficiency of various metal compounds in trapping the HCl, it was found that Ca(OH)2 was more efficient than Mg(OH)2, and that CaO was more efficient than MgO. These results are discussed in light of the reaction mechanism between HCl and the metal compounds. 相似文献
1