A passive sampling device for determining formaldehyde in indoor air

A passive sampling device based on the principle of diffusion has been developed for the determination of formaldehyde in ambient air. The sampler consists of a capped glass tube (with approximate dimensions of 2.4 × 9 cm) containing a glass-fiber filter treated with NaHSO₃. In the field, the device collects a sample by being uncapped for a specified sampling time. After being recapped and returned to the laboratory, the filter is analyzed by the chromotropic acid (CTA) method. Laboratory validation studies were conducted by exposing the sampling devices for 1 week to dry formaldehyde gas generated by passing trioxane vapor over an acid catalyst bed. In these tests, formaldehyde concentrations ranged from 0.05 to 0.80 mL/m³. Reproducibility was excellent, with relative standard deviations averaging 5.4% for five constant concentrations. The lower detection limit was determined to be 3.6 mL/m³ h. In an occupational environment an 8-h sample would be sufficient to detect compliance with the OSHA permissible exposure limit of 3 mL/m³; in a residential environment a 1-week sample would allow detection of 0.025 mL/m³ for indoor air quality audits.     

Landfill leachate treatment methods: A review

Landfilling of municipal waste is still a major issue of the waste management system in Europe. The generated leachate must be appropriately treated before being discharged into the environment. Technologies meant for leachate treatment can be classified as follows (i) biological methods, (ii) chemical and physical methods. Here we review briefly the main processes currently used for the landfill leachates treatments.     

The treatment of wastewater containing pharmaceuticals in microcosm constructed wetlands: the occurrence of integrons (int1–2) and associated resistance genes (sul1–3, qacEΔ1)

Environmental Science and Pollution Research - The aim of this study was to analyze the occurrence of sulfonamide resistance genes (sul1–3) and other genetic elements as antiseptic resistance...     

The population dynamics of nitrifiers in ammonium-rich systems

Non-optimal pH, dissolved oxygen concentration, the presence of toxic substances, or the influence of grazers are known to cause disturbances in nitrification. Because activated sludge is a mixture of different organisms, bacteria, and higher organisms, the stability of processes such as carbon removal, nitrification, denitrification, and dephosphatation depends on a range of interactions. These interactions occur both between and within trophic levels. Understanding of the ecology of microorganisms involved in bioprocesses is essential for effective control of startup and operation of a particular process. The aim of the study was to gain further insight into the dynamics of nitrifiers in activated sludge at various sludge ages while treating higher concentrations of ammonium. The results confirmed the importance of Nitrosococcus mobilis and Nitrobacter sp. as the dominant nitrifiers responsible for nitritation and nitratation, respectively, in the presence of unlimited ammonium. The size of the dominant bacteria colony was larger compared to the other species present and reached 25 microm. Problems with nitrification occurred in all high-ammonium loaded reactors. The dynamics of nitrifier population was monitored by oxygen uptake rate (OUR) using a test enabling the OUR measurement separately for ammonium-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB). The results reveal the hypersensitivity of nitrifiers to the substrate and products of incomplete nitrification.     

Acute toxicity and genotoxicity of five selected anionic and nonionic surfactants

The results of four toxicity bioassays of selected anionic and nonionic surface active agents were presented. Three widely used anionic surfactants that belong to alkyl sulphates (AS), alkylbenzene sulphonates (LAS) and alkylpolyoxyethylene sulphates (AES) as well as nonionic surfactants: polyoxyethylene alkyl ethers (AE) and polyoxylethylene alkylphenyl ethers (APE) were tested. Three different toxicity assays to aquatic organisms: Physa acuta Draparnaud, Artemia salina and Raphidocelis subcapitata were applied. Additionally, the genotoxicity test with Bacillus subtilis M45 Rec- and H17 Rec+ strains was performed. The obtained results showed that none of the surfactants studied was genotoxic at the concentration 1000 mg l(-1). On the basis of toxicity tests to aquatic organisms all tested anionic surfactants were harmful (LC50 between 10 and 100 mg l(-1)), whereas nonionic ones were toxic (LC50 between 1 and 10 mg l(-1)) or even highly toxic (LC50 below 1 mg l(-1)). Moreover, the bigger was the molecular weight of the tested compound, the higher toxicity was observed.     

Trace organic chemical contaminants in office spaces

We present data suggesting that workers in offices are exposed to a broad spectrum of solvent-related organic chemical contaminants present in very low concentrations relative to promulgated or recommended industrial hygiene exposure levels, but in high concentrations relative to outdoor air. With the aid of simple modeling, working hypotheses about various contaminant sources — new and aged building materials, wet-process photocopiers, tobacco smoke, and building maintenance products — are made with respect to the composition, amounts, and generation patterns of their emissions. The results show that effective control strategies can be implemented that do not compromise energy efficiency.