Silver impregnated carbon for adsorption and desorption of elemental mercury vapors

The Hg0 vapor adsorption experimental results on a novel sorbent obtained by impregnating a commercially available activated carbon (Darco G60 from BDH) with silver nitrate were reported. The study was performed by using a fundamental approach, in an apparatus at laboratory scale in which a synthetic flue gas, formed by Hg0 vapors in a nitrogen gas stream, at a given temperature and mercury concentration, was flowed through a fixed bed of adsorbent material. Breakthrough curves and adsorption isotherms were obtained for bed temperatures of 90, 120 and 150°C and for Hg0 concentrations in the gas varying in the range of 0.8–5.0 mg/m3. The experimental gas-solid equilibrium data were used to evaluate the Langmuir parameters and the heat of adsorption. The experimental results showed that silver impregnated carbon was very effective to capture elemental mercury and the amount of mercury adsorbed by the carbon decreased as the bed temperature increased. In addition, to evaluate the possibility of adsorbent recovery, desorption was also studied. Desorption runs showed that both the adsorbing material and the mercury could be easily recovered, since at the end of desorption the residue on solid was almost negligible. The material balance on mercury and the constitutive equations of the adsorption phenomenon were integrated, leading to the evaluation of only one kinetic parameter which fits well both the experimentally determined breakthrough and desorption curves.     

A procedure to design a Permeable Adsorptive Barrier (PAB) for contaminated groundwater remediation

A procedure to optimize the design of a Permeable Adsorptive Barrier (PAB) for the remediation of a contaminated aquifer is presented in this paper. A computer code, including different routines that describe the groundwater contaminant transport and the pollutant capture by adsorption in unsteady conditions over the barrier solid surface, has been developed. The complete characterization of the chemical–physical interactions between adsorbing solids and the contaminated water, required by the computer code, has been obtained by experimental measurements. A case study in which the procedure developed has been applied to a tetrachloroethylene (PCE)-contaminated aquifer near a solid waste landfill, in the district of Napoli (Italy), is also presented and the main dimensions of the barrier (length and width) have been evaluated. Model results show that PAB is effective for the remediation of a PCE-contaminated aquifer, since the concentration of PCE flowing out of the barrier is everywhere always lower than the concentration limit provided for in the Italian regulations on groundwater quality.     

Efficient and sustainable environmental management as a means of addressing current pollution issues

Environmental Science and Pollution Research -     

Comparison of topological,empirical and optimization-based approaches for locating quality detection points in water distribution networks

Environmental Science and Pollution Research - The positioning of quality detection points as well as the frequency of sampling is a crucial aspect for the implementation of Water Safety Plans...     

Odorous emission reduction from a waste landfill with an optimal protection system based on fuzzy logic

Effective landfill management and operation require an accurate evaluation of the occurrence and extent of odour emission events, which are among the main causes of resident complaints and concerns, in particular in densely urbanised areas. This paper proposes a fuzzy optimal protection system (FOPS) based on fuzzy logic to manage odour production from a municipal solid waste (MSW) landfill. The case study is a MSW landfill in an old quarry site located 6 km north-west of Naples city centre (Italy). The aim is to reduce the odour nuisance in the area surrounding the landfill where there are several sensitive receptors. FOPS is based on logical relationships between local atmospheric dynamics, number and intensity of odour pollution events detected by certain fixed receptors and odour emission rate via an optimal fuzzy approach. Such system allows to start, in real time, established mitigation actions required to further reduce the odorous emissions from the landfill itself (e.g. spraying of perfumed substances and activation of extraction wells), especially when weather conditions might not be favourable and cause by causing a higher odour perception. The fuzzy system was coupled with the air pollutant transport software CALPUFF to simulate the odour dispersion in the considered area taking into account both different odour emission rates and local weather conditions. FOPS results show that this approach can be very useful as, by measuring the odour concentrations, a significant reduction of the odour exceedances over the thresholds fixed, to minimise the olfactory harassment, was observed in the whole area studied.

     

Adsorption of elemental mercury vapors from synthetic exhaust combustion gas onto HGR carbon

An activated carbon commercially available named HGR, produced by Calgon-Carbon Group, was used to adsorbe metallic mercury. The work is part of a wider research activity by the same group focused on the removal of metallic and divalent mercury from combustion flue gas. With respect to previously published papers, this one is aimed at studying in depth thermodynamic equilibria of metallic mercury adsorption onto a commercial activated carbon. The innovativeness lies in the wider operative conditions explored (temperature and mercury concentrations) and in the evaluation of kinetic and thermodynamic data for a commercially available adsorbing material. In detail, experimental runs were carried out on a laboratory-scale plant, in which Hg° vapors were supplied in a nitrogen gas stream at different temperature and mercury concentration. The gas phase was flowed through a fixed bed of adsorbent material. Adsorbate loading curves for different Hg° concentrations together with adsorption isotherms were achieved as a function of temperature (120, 150, 200°C) and Hg° concentrations (1.0?7.0 mg/m³). Experimental runs demonstrated satisfying results of the adsorption process, while Langmuir parameters were evaluated with gas–solid equilibrium data. Especially, they confirmed that adsorption capacity is a favored process in case of lower temperature and they showed that the adsorption heat was –20 kJ/mol. Furthermore, a numerical integration of differential equations that model the adsorption process was proposed. Scanning electron microscopy (SEM) investigation was an useful tool to investigate about fresh and saturated carbon areas. The comparison between them allowed identification of surface sites where mercury is adsorbed; these spots correspond to carbon areas where sulfur concentration is greater.

Implications: Mercury compounds can cause severe harm to human health and to the ecosystem. There are a lot of sources that emit mercury species to the atmosphere; the main ones are exhaust gases from coal combustion and municipal solid waste incineration. Furthermore, certain CO₂ capture processes, particularly oxyfuel combustion in a pulverized fuel coal-fired power station, produce a raw CO₂ product containing several contaminants, mainly water vapor, oxygen, and nitrogen but also mercury, that have to be almost completely removed; otherwise these would represent a strong drawback to the success of the process.     

Innovative approach and design for environmental protection from arising threats

Environmental Science and Pollution Research -