Environmental-economic models for total emission control of regional environmental pollution — input-output approach

This paper deals with a Leontief-type dynamic input-output analysis for total emission control of pollution. A dynamic input-output model can be described as a linear programming problem. In this paper an objective function to be minimized is chosen as the sum of pollutants emitted in a regional area throughout the planning period. It is assumed that consumption grows with a constant growth rate throughout the planning period. With this model, we can tell how to assign the elimination rate of pollutants to each production sector, under the constraint that the total emission standard is satisfied in each term of the planning period.     

Simplified Fabrication of Optically Transparent Composites Reinforced with Nanostructured Chitin

Optically transparent films reinforced with micro to nano scale chitin particles were successfully developed in this study. Chitin composites based on micro scale particles which are larger than the optical wavelength do not cause light scattering provided that chitin particles are composed of nano structure networks which allow monomer impregnation and polymerization. This could lead a simplified process for fabricating transparent composites. The composites reinforced by the chitin micro particles not only retained the transparency of the plastic but also helped the effectiveness of its co-efficient of thermal expansion as similar to chitin nanofibers. Furthermore, chitin nanofibers transparent films are thermally stable against temperature as high as 200 °C for a long period of time. This could lead to number of important commercial applications, and is a significant move towards the sustainable utilization of marine bio-resources.     

Molding Method, Thermal and Mechanical Properties of Jute/PLA Injection Molding

Natural composites have been important materials system due to preservation of earth environments. Natural fibers such as jute, hemp, bagasse and so on are very good candidate of natural composites as reinforcements. On the other hand regarding matrix parts thermosetting polymer and thermoplastic polymer deriver form petrochemical products are not environmental friendly material, even if thermoplastic polymer can be recycled. In order to create fully environmental friendly material (FEFM) biodegradable polymer which can be deriver from natural resources is needed. Therefore poly(lactic acid) (PLA) polymer is very good material for the FEFM. In this paper jute fiber filled PLA resin (jute/PLA) composites was fabricated by injection moldings and mechanical properties were measured. It is believable that industries will have much attention to FEFM, so that injection molding was adopted to fabricate the composites. Long fiber pellet fabricated by pultrusion technique was adopted to prepare jute/PLA pellet. Because it is able to fabricate composite pellets with relative long length fibers for injection molding process, where, jute yarns were continuously pulled and coated with PLA resin. Here two kinds of PLA materials were used including the one with mold releasing agent and the other without it. After pass through a heated die whereby PLA resin impregnates into the jute yarns and sufficient cooling, the impregnated jute yarns were cut into pellets. Then jute/PLA pellets were fed into injection machine to make dumbbell shape specimens. In current study, the effects of temperature of PLA melting temperature i.e. impregnation temperature and the kinds of PLA were focused to get optimum molding condition. The volume fractions of jute fiber in pellet were measured by several measuring method including image analyzing, density measurement and dissolution methods. Additionally, thermal and mechanical properties were investigated. It is found that 250° is much suitable for jute/PLA long fiber pultrusion process because of its less heat degradation of jute, better impregnation, acceptable mechanical property and higher production efficiency. Additionally the jute fibers seem much effective to increase deflection temperature under load, tensile modulus and Izod strength.     

日本城市土壤的重金属污染研究

采用X-射线光谱法测定了一些日本城市公园土壤样品中的Pb,Zn,Cu,Cr,Ni,As,Fe,Ti,Mn,K,Ca,Rb和Sr共13种元素,结果发现Pb和Zn的含量在土壤剖面中从上至下有明显下降的趋势,并显示出Pb与Zn污染有一定的相关关系。同时,也探讨了一种判断土壤污染的方法。      

Troop size,habitat quality,and home range area in Japanese macaques

Summary The correlation between troop size (N) and home range area (R) is examined in terms of habitat quality with 32 data sets for the Japanese macaque (Macaca fuscata) from its entire distribution range. The habitat quality is represented by the vegetation type and the degree the habitat is disturbed. A proportional relationship is found between N and R when the two major vegetation types (deciduous and evergreen) are discriminated and only the data from relatively undisturbed habitats are considered. This result is discussed in relation to bioenergetics.     

Estrus cycle asynchrony in wild female chimpanzees, Pan troglodytes schweinfurthii

Although estrous synchrony has been reported in a number of mammalian species, most often among primates, methodological and analytical problems make it difficult to interpret these results. We developed a novel estrous synchrony index and employed a randomization procedure to analyze long-term observations of female chimpanzee (Pan troglodytes schweinfurthii) estrous cycles at the Mahale Mountains National Park, Tanzania. Our results revealed that female chimpanzees at Mahale avoid synchronizing their estrous periods with each other. We also found that birthrates decreased as the breeding sex ratio increased. We suggest that estrous asynchrony decreases female–female competition for mates. Asynchrony may also reduce the potential for male sexual coercion by nonpreferred mating partners.     

Catalytic decomposition of hydrocarbon into hydrogen and carbon in a spouted-bed reactor as the second-stage reactor of a plastic recycling process

A two-stage process for the chemical recycling of plastics is proposed. In this process, which consists of two reactors, plastics are converted into hydrogen and carbon. In the first reactor, plastic chips are thermally decomposed into hydrocarbons. In the second reactor, the hydrocarbons formed in the first reactor are catalytically decomposed into carbon and hydrogen. In this study, in order to obtain basic data for the second reactor, propene was catalytically decomposed in a laboratory-scale spouted-bed reactor (600mm high, 21.6mm internal diameter, made of SUS304). The effect of the type of spouting medium used on the decomposition behavior of propene was investigated using four types of spouting medium (nickel-plated -alumina, palladium-plated -alumina, nickel-impregnated -alumina, and -alumina). The nickel-impregnated -alumina gave the best propene conversion and hydrogen yield.     

Theoretical study of the dechlorination reaction pathways of octachlorodibenzo-p-dioxin

The dechlorination reaction pathways of 1,2,3,4,6,7,8,9-octachlorodibenzo-p-dioxin (OCDD) by the hydrogen atom are investigated by the density-functional theory B3PW91 method. The dechlorination reactions have large exothermicity and small activation energies. The activation energies (approximately 5 kcal/mol) of the sigma-complex formation due to the hydrogen addition are lower than those (approximately 9 kcal/mol) of the direct chlorine abstraction. It is suggested that the sigma-complex plays an important role in the reactions, although it has scarcely been shown in previous studies of the dechlorination of dioxins. The sigma-complex formation is favored at low temperatures and the chlorine abstraction is favored at high temperatures. Furthermore, it is found that the lateral positions have a marginal preference over the longitudinal positions. The dechlorination of OCDD by the hydrogen atom is thus not likely to result in a dominant formation of the laterally substituted toxic congeners.     

Quantitative analysis of perfluorinated chemicals in media for in vitro fertilization and related samples

The actual standard in vitro fertilization (IVF) protocol recommends an overnight gamete co-incubation. All of the culture media used for human IVF are supplemented with serum or albumin. In the present study, we determined the concentrations of perfluorinated chemicals (PFCs) in IVF media (IVFM) and related samples by liquid chromatography with tandem mass spectrometry (LC/MS/MS). The results indicated that the concentrations of PFOS and PFOA in the protein source were higher than those in the IVFM samples. Compared with human plasma concentrations of PFCs, PFCs in all of the IVFM samples, such as PFBS, PFHxS and PFOA, were either not detected or present at only trace levels, even when protein source was added. LC/MS/MS could be used to determine PFCs in IVFM samples in future studies of the effects of PFC exposure on intrauterine insemination.