Environmental impact of coal washery and Damodar River water on the morphometry and biochemical changes of maize (Zea mays L.) and soil health

Enormous quantity of water is used for coal beneficiation and accordingly huge amount of effluents are being generated. In this study an attempt was made to evaluate the potential of this effluent water for irrigation. Water samples were collected from three different points (a) feeding point, (b) thickening point, and (c) outlet point of coal washery, and from Damodar River for monitoring the water quality. The samples were analyzed for various parameters and compared with prescribed standard, which revealed that the total suspended solids of thickening point and Damodar River were higher. A pot experiment with maize was conducted to study the suitability of this coal washery water for irrigation. Pots were irrigated with water from the three points of washery and Damodar River in two concentrations (100% and 50% dilution with distilled water); pure distilled water was used for control. There was 100% germination in all the treatments. The plant growth, chlorophyll content and soil quality parameters were significantly better in washery and Damodar River water treated pots. The Damodar River water and washery water from feeding and outlet point could be successfully used for irrigation. In general mixing with good quality water has shown better results.     

Management of Lignite Fly Ash for Improving Soil Fertility and Crop Productivity

Lignite fly ash (LFA), being alkaline and endowed with excellent pozzolanic properties, a silt loam texture, and plant nutrients, has the potential to improve soil quality and productivity. Long-term field trials with groundnut, maize, and sun hemp were carried out to study the effect of LFA on growth and yield. Before crop I was sown, LFA was applied at various doses with and without press mud (an organic waste from the sugar industry, used as an amendment and source of nutrients). LFA with and without press mud was also applied before crops III and V were cultivated. Chemical fertilizer, along with gypsum, humic acid, and biofertilizer, was applied in all treatments, including the control. With one-time and repeat applications of LFA (with and without press mud), yield increased significantly (7.0–89.0%) in relation to the control crop. The press mud enhanced the yield (3.0–15.0%) with different LFA applications. The highest yield LFA dose was 200 t/ha for one-time and repeat applications, the maximum yield being with crop III (combination treatment). One-time and repeat application of LFA (alone and in combination with press mud) improved soil quality and the nutrient content of the produce. The highest dose of LFA (200 t/ha) with and without press mud showed the best residual effects (eco-friendly increases in the yield of succeeding crops). Some increase in trace- and heavy-metal contents and in the level of γ-emitters in soil and crop produce, but well within permissible limits, was observed. Thus, LFA can be used on a large scale to boost soil fertility and productivity with no adverse effects on the soil or crops, which may solve the problem of bulk disposal of fly ash in an eco-friendly manner.     

Gasification of refuse derived fuel in a fixed bed reactor for syngas production

Steam gasification of two different refuse derived fuels (RDFs), differing slightly in composition as well as thermal stability, was carried out in a fixed-bed reactor at atmospheric pressure. The proximate and ultimate analyses reveal that carbon and hydrogen are the major components in RDFs. The thermal analysis indicates the presence of cellulose and plastic based materials in RDFs. H2 and CO are found to be the major products, along with CO2 and hydrocarbons resulting from gasification of RDFs. The effect of gasification temperature on H2 and CO selectivities was studied, and the optimum temperature for better H2 and CO selectivity was determined to be 725 degrees C. The calorific value of product gas produced at lower gasification temperature is significantly higher than that of gas produced at higher process temperature. Also, the composition of RDF plays an important role in distribution of products gas. The RDF with more C and H content is found to produce more amounts of CO and H2 under similar experimental conditions. The steam/waste ratio showed a notable effect on the selectivity of syngas as well as calorific value of the resulting product gas. The flow rate of carrier gas did not show any significant effect on products yield or their distribution.     

Concentration and recovery of coliphages from water with bituminous coal.

Coliphages represent a process indicator for fecal pollution. The coal bed concentration method prepared for enterovirus was refined for a concentration of coliphages. A bed made from 1.5 g of 120-mesh coal powder was used for concentrating coliphage from 200 mL of a water sample with or without the addition of aluminum chloride at different pH values. The isolated E. coli strain EC-R8 was found to be more susceptible to the desired coliphage and showed significant coliphage-coliform response, with clear plaque used for further studies. The complete coliphage adsorption was achieved with the addition of 0.0005 M AlCl3 at pH 6.0. Adsorbed coliphages were eluted with 3% beef extract in Mcllvaine buffer at pH 7.1, with an average recovery of 78.74%. This concentration technique was applied for the detection of coliphages from the well water of Nagpur city (India) and found to contain coliphages in the range of 2 to 28 plaque-forming units per liter (PFU/L).     

Development of economical and highly efficient electrolyte using vanadium pentoxide for vanadium redox flow battery

Environmental Science and Pollution Research - Vanadium pentoxide can be an inexpensive replacement to vanadium sulfate in synthesizing vanadium redox flow battery (VRFB) electrolytes. In this...     

Study of indiscriminate distribution of restrained antimicrobial resistome of different environmental niches

Environmental Science and Pollution Research - Prophylactic usage and high persistent nature of several antibiotics have put selective pressure on the native microbial population that led to the...     

Sensitivity analysis of Phast’s atmospheric dispersion model for three toxic materials (nitric oxide, ammonia, chlorine)

We present the results of a parametric sensitivity analysis of a widely used model for atmospheric dispersion of toxic gases, in order better to understand the influence of user-adjustable parameters on model outputs. We have studied 60 min continuous release scenarios for three different products (nitric oxide, ammonia and chlorine), chosen to cover a range of physical characteristics and storage conditions. For each product, we have broken down base-case scenarios into a number of sub-scenarios corresponding to different release conditions which determine physical phenomena (flow rate, release angle, release elevation and atmospheric stability class). The use of statistical tools to analyze the results of a large number of model executions allows us to rank model parameters according to their influence on the variability of a number of model outputs (distances and concentrations), on a per-scenario and per-product basis. Analysis of the results allows us to verify our understanding of the modeling of cloud dispersion.