Comparison of various advanced oxidation processes and chemical treatment methods for COD and color removal from a polyester and acetate fiber dyeing effluent

In this paper, a comparison of various advanced oxidation processes (O3, O3/UV, H2O2/UV, O3/H2O2/UV, Fe2+/H2O2) and chemical treatment methods using Al2(SO4)3.18H2O, FeCl3 and FeSO4 for the chemical oxygen demand (COD) and color removal from a polyester and acetate fiber dyeing effluent is undertaken. Advanced oxidation processes (AOPs) showed a superior performance compared to conventional chemical treatment, which maximum achievable color and COD removal for the textile effluent used in this study was 50% and 60%, respectively. Although O3/H2O2/UV combination among other AOPs methods studied in this paper was found to give the best result (99% removal for COD and 96% removal for color), use of Fe2+/H2O2 seems to show a satisfactory COD and color removal performance and to be economically more viable choice for the acetate and polyester fiber dyeing effluent on the basis of 90% removal.     

Overview of anaerobic treatment: thermophilic and propionate implications.

Difficulties in achieving low propionate concentrations in anaerobically treated effluents are frequently reported in the literature (Ahring, 1994; Kugelman and Guida, 1989; Rimkus et al., 1982), especially at thermophilic temperatures, with concentrations as high as 1000 to 9600 mg/L sometimes produced. This paper will detail the effect of several variables on the performance of both mesophilic and thermophilic regimes. Studies concerning the effect of the following four important factors on performance are included: reactor configuration, inorganic nutrient supplementation, substrate characteristics, and the unique role of microbial consortia proximity in enhancing performance. Reactor configuration modifications, essential nutrient additions, and the importance of close microbial proximity were all found to contribute to improvement in thermophilic anaerobic digestion in all the studies. It was found that, in substrates that shunt significant amounts of the electron donor through propionate, performance was critically related to reactor optimization, with propionate removal efficiency considerably improved using intact upflow anaerobic sludge blanket granules, less so in a homogenized granule slurry blanket, and noticeably reduced even more when the completely stirred reactor configuration of homogenized granules was used. The critical importance of extremely close microbial consortia proximity in maintaining hydrogen intermediates at very low levels to efficiently convert propionate to hydrogen and acetate was demonstrated. Compared to mesophilic digestion, thermophilic digestion manifested elevated levels of propionate, except in the nonmixed reactors, which had close microbial consortia proximity. The reactor configuration with the best results was the anaerobic digestion elutriated phased treatment (ADEPT) scheme, in which the raw sludge was elutriated of its fermenting volatile fatty acids, as they are generated in a short 5- to 8-day solids retention time (SRT) in one reactor and the elutriate then metabolized by passing up through a methanogenic granule or slurry blanket (with its close microbial consortia proximity) in a separate reactor with a 20- to 50-day SRT. Loading rates and performance of the ADEPT reactor configuration were superior to the standard continuously stirred tank reactor, and ADEPT thermophilic temperatures allowed higher organic loading rates without high propionate concentrations in the effluent.     

Comparison of old and new municipal solid waste management systems in Denizli, Turkey

Rapid economic growth, increasing population and change in living standards contribute to increasing the generation rate of municipal solid waste (MSW) in Denizli city, like other Turkish cities. The improper and poor MSW management system (old system) in Denizli caused environmental problems originating from the uncontrolled release of methane and leachate. In addition, the disposal of recyclable materials in unsanitary landfills is responsible for the consumption and destruction of natural sources. This paper presents a general overview of old and new MSW management practices in Denizli. Detailed data on MSW management practices including collection, transportation, disposal and recycling have been presented. The amount of solid waste generated in Denizli over the last decade has increased steadily over the years, from 108,500 tons in 1995 to 179,495 tons in 2006. The average MSW generation rate was found to be 1.23kg/day per capita. The major constituent of MSW in Denizli is food waste, but the percentage of recyclable waste has increased significantly recently. Except for metal wastes, the percentages of recyclable waste materials in Denizli are higher than in all neighborhood cities. The objective of this study is to compare the old and new MSW management systems in Denizli city. The MSW management system has been changed entirely last five years. A dumpsite was closed and a sanitary landfill with a composting facility was constructed. In addition, source separated collection has been carried out since 2002. The quantity of recyclable waste collected increased from 195 to 1549 tons. The amount of recyclable waste will continue to be increased by expanding the source separation collection system to all the districts of the city and preventing scavenging. Thus, revenue from recyclable waste ($7227 in 2006) is expected to increase. In addition, the capacity of the composting facility will be increased. Most importantly, information to increase public participation and awareness in municipal recovery programs has to be provided.     

Real-Time PCR Detection of Norovirus in Mussels Collected from the Bosphorus in Istanbul,Turkey

Norovirus (NoV) is recognised as one of the most common causes of foodborne infections, and shellfish are a well-documented source of this virus. The presence of NoV in shellfish has not previously been investigated in Turkey, and hence the aim of this study was to determine the frequency of human NoV genogroups I and II in mussels collected from the Bosphorus, Istanbul, Turkey. A total of 320 mussels representing 110 samples originating along the Bosphorus coast were collected from fish distributors. RNA was extracted using the RNeasy Mini Kit and real-time RT–PCR performed using primers specific for NoV genogroup I and II. Amongst the 110 samples, 5 (4.5%) were found to be positive for NoV genogroup II by SYBR Green assay; no genogroup I was detected. A positive signal was obtained by SYBR Green for NoV Genogroup II in mussels collected in October, November and December 2008, and February and July 2009. Only four out of five SYBR Green positive samples could be confirmed by the use of a NoV GII probe-based real-time RT–PCR. The average count and SD of Enterobactericaeae, E. coli and sulphide reductase anaerobic bacteria in PCR positive mussels were 3.56 log ± 0.96 log, 2.32 log ± 0.77 log and 1.70 log ± 0.56 log, respectively. This study shows that NoV Genogroup II is present in mussels collected from the Bosphorus, Istanbul, and may constitute a risk to human health.     

Effect of alkalinity on the performance of a simulated landfill bioreactor digesting organic solid wastes

This study investigated the effects of alkalinity on the anaerobic treatment of the organic solid wastes collected from the kitchen of Engineering Faculty in Dokuz Eylul University, Izmir, Turkey and the leachate characteristics treated in three simulated landfill anaerobic bioreactors. All of the reactors were operated with leachate recirculation. One reactor was operated without alkalinity addition. The second reactor was operated by the addition of 3 g l-1 d-1 of NaHCO3 alkalinity to the leachate and the third reactor was operated by the addition of 6 g l-1 d-1 NaHCO3 alkalinity to the leachate. After 65 d of anaerobic incubation, it was observed that the chemical oxygen demand (COD), volatile fatty acids (VFA) concentrations, and biochemical oxygen demand to chemical oxygen demand (BOD5/COD) ratios in the leachate samples produced from the alkalinity added reactors were lower than the control reactor while the pH values were higher than the control reactor. The COD values were measured as 18900, 3800 and 2900 mg l-1 while the VFA concentrations were 6900, 1400 and 1290 mg l-1, respectively, in the leachate samples of the control, and reactors containing 3 g l-1 NaHCO3 and 6 g l-1 NaHCO3 after 65 d of anaerobic incubation. The total nitrogen (TN), total phosphorus (TP) and ammonium nitrogen (NH4-N) concentrations in organic solid waste (OSW) significantly reduced in the reactor containing 6 g l-1 NaHCO3 by d 65. The values of pH were 6.54, 7.19 and 7.31, after 65 d of anaerobic incubation, respectively, in the aforementioned reactors results in neutral environmental conditions in alkalinity added reactors. Methane percentage of the control, reactors containing 3 g l-1 NaHCO3 and 6 g l-1 NaHCO3 were 37%, 64% and 65%, respectively, after 65 d of incubation. BOD5/COD ratios of 0.27 and 0.25 were achieved in the 3 and 6 g l-1 NaHCO3 containing reactors, indicating a better OSW stabilization. Alkalinity addition reduced the waste quantity, the organic content of the solid waste and the biodegradation time.     

Treatment of copper industry waste and production of sintered glass-ceramic.

Copper waste is iron-rich hazardous waste containing heavy metals such as Cu, Zn, Co, Pb. The results of leaching tests show that the concentration of these elements exceeds the Turkish and EPA regulatory limits. Consequently, this waste cannot be disposed of in its present form and therefore requires treatment to stabilize it or make it inert prior to disposal. Vitrification was selected as the technology for the treatment of the toxic waste under investigation. During the vitrification process significant amounts of the toxic organic and inorganic chemical compounds could be destroyed, and at the same time, the metal species are immobilized as they become an integral part of the glass matrix. The copper flotation waste samples used in this research were obtained from the Black Sea Copper Works of Samsun, Turkey. The samples were vitrified after being mixed with other inorganic waste and materials. The copper flotation waste and their glass-ceramic products were characterized by X-ray analysis (XRD), scanning electron microscopy and by the toxicity characteristic leaching procedure test. The products showed very good chemical durability. The glass-ceramics fabricated at 850 degrees C/2 h have a large application potential especially as construction and building materials.