Trees as bioindicator of heavy metal pollution in three European cities

Concentrations of four heavy metals were determined in tree leaves and bark collected from polluted and non-polluted areas of three European cities (Salzburg, Belgrade and Thessaloniki) for a comparative study. Platanus orientalis L. and Pinus nigra Arn., widespread in urban northern and southern Europe, were tested for their suitability for air quality biomonitoring. Leaves and barks were collected uniformly of an initial quantity of about 30 g of each sample. Analysis was accomplished by electrothermal atomic absorption spectrometry after total digestion. Site-dependent variations were found with the highest concentration level measured in Belgrade, followed by Thessaloniki and Salzburg. A higher accumulation of heavy metals was found in bark compared to leaves. Pine tree bark, accumulating higher concentrations of trace metals compared to plane tree bark, shows a higher efficiency as bioindicator for urban pollution. Both indicator species are suitable for comparative studies on bioindication of urban air pollution.     

Statistical characteristics of selected elements in vegetables from Kosovo

Zinc, copper, iron, chromium and cobalt are essential elements for human health, showing toxicity only in high concentrations, while lead and cadmium are extremely toxic even as traces. Therefore, it is important to monitor the contents of toxic metals in vegetables. Large number of vegetables is grown and used in nutrition, in Kosovo. The concentrations of selected elements in vegetables (radish, onion, garlic and spinach) from Kosovo were determined using ICP-OES method. Oral intake of metals and health risk index were calculated. Statistical analysis indicated numerous positive correlations between concentrations of selected elements in vegetables. As a result of principal component analysis, 15 new variables were obtained which were characterized by eigenvalues. The sequence of health quotients for the heavy metals followed the decreasing order Zn?=?Mn?>?Pb?>?Cu?>?Ni?>?Fe?>?Cd?>?Co?>?Cr. The health quotients for all investigated heavy metals were below 1 (one), which is considered safe. The vegetables from Kosovo are mainly safe for use in everyday diet.     

Spatial distribution of main forest soil groups in Croatia as a function of basic pedogenetic factors

The model of spatial distribution of main forest soil groups in Croatia was developed as a function of basic pedogenetic factors: lithological substratum, macroclimate and relief. Used data about soil group, lithological substratum, terrain slope and aspect were collected on 1881 soil profiles. Macroclimatic data were estimated for each soil profile by spatial interpolation between meteorological stations. Feedforward neural networks were used as modelling tool. The final model has total classification correctness of 63.5% for training data set and 62.3% for independent test data set. The best result (86.4%) was achieved for fluvisols which are strongly spatially correlated with alluvial sediment in a flood plains. The worst result was achieved for luvisol (14.2%) which mainly comprised very old soils, probably developed under pedogenetic factors different from actual. The model was applied on entire Croatian territory aiming at construction of potential spatial distribution of main forest soils (without human impact), which was compared by the potential spatial distribution of major forest types modelled independently.     

Possible health impacts of naturally occurring uptake of aristolochic acids by maize and cucumber roots: links to the etiology of endemic (Balkan) nephropathy

Aristolochic acids (AAs) are nephrotoxic and carcinogenic derivatives found in several Aristolochia species. To date, the toxicity of AAs has been inferred only from the effects observed in patients suffering from a kidney disease called “aristolochic acid nephropathy” (AAN, formerly known as “Chinese herbs nephropathy”). More recently, the chronic poisoning with Aristolochia seeds has been considered to be the main cause of Balkan endemic nephropathy, another form of chronic renal failure resembling AAN. So far, it was assumed that AAs can enter the human food chain only through ethnobotanical use (intentional or accidental) of herbs containing self-produced AAs. We hypothesized that the roots of some crops growing in fields where Aristolochia species grew over several seasons may take up certain amounts of AAs from the soil, and thus become a secondary source of food poisoning. To verify this possibility, maize plant (Zea mays) and cucumber (Cucumis sativus) were used as a model to substantiate the possible significance of naturally occurring AAs’ root uptake in food chain contamination. This study showed that the roots of maize plant and cucumber are capable of absorbing AAs from nutrient solution, consequently producing strong peaks on ultraviolet HPLC chromatograms of plant extracts. This uptake resulted in even higher concentrations of AAs in the roots compared to the nutrient solutions. To further validate the measurement of AA content in the root material, we also measured their concentrations in nutrient solutions before and after the plant treatment. Decreased concentrations of both AAI and AAII were found in nutrient solutions after plant growth. During this short-term experiment, there were much lower concentrations of AAs in the leaves than in the roots. The question is whether these plants are capable of transferring significant amounts of AAs from the roots into edible parts of the plant during prolonged experiments.     

On the influence of chemical initial and boundary conditions on annual regional air quality model simulations for North America

The influence of chemical initial conditions and chemical lateral boundary conditions (CLBCs) on long-term regional air quality model simulations was investigated using outputs from an annual simulation of the year 2002 on a North American domain. This simulation was carried out using the AURAMS regional air quality model. It was subdivided into three multi-month segments with two overlap periods (May 15–30 and September 1–30) to allow the segments to be run in parallel. For this approach to work, model predictions had to match very closely by the end of the two-week and four-week overlap periods. The time required for the values of daily domain-average surface PM_2.5 concentration to match for the two simulation segments associated with each of the two overlap periods was four and six days, respectively. For individual locations within the model domain, however, the required spin-up period was as much as nine days, considerably longer than the 2–4-day spin-up period usually assumed in the literature. For ozone, on the other hand, the daily domain-average surface ozone concentration values did not converge for either overlap period. A zero-gradient CLBC had been used for all run segments and species. When a time-invariant CLBC for ozone was used instead, the daily domain-average surface ozone concentration values behaved more realistically and did converge after fewer than three days. A similar improvement was also obtained for individual locations, but with spin-up periods of up to nine days. Model chemical spin-up time thus seems to be dependent on the species considered, the time required for the influence of the inflow boundaries to reach all locations within the domain, and the impact of local emissions sources. These results suggest the use of a spin-up period of longer than one week for a large (continental) domain and long-term simulation of PM_2.5 and O₃ rather than the 2–4 days commonly assumed in the literature.     

Accumulation of organochlorine contaminants in loggerhead sea turtles, Caretta caretta, from the eastern Adriatic Sea

We analyzed 15 polychlorinated biphenyls (PCBs) and five organochlorine pesticides (OCPs) in fat tissue of 27 loggerhead sea turtles (Caretta caretta) from eastern Adriatic Sea with the curved carapace length ranging from 25.0 to 84.5 cm. The PCB profile was dominated by hexa- and hepta-chlorinated congeners, with PCB-153 (median: 114.9 ng g⁻¹ wet mass), PCB-138 (80.0 ng g⁻¹ w.m.), and PCB-180 (26.7 ng g⁻¹ w.m.) detected with the highest levels. Toxic mono-ortho congeners PCB-118, PCB-105 and PCB-180 with dioxin-like toxicity were found in >70% samples. 4,4′-DDE (81.0 ng g⁻¹ w.m.) prevailed the OCP signature, accounting for 80% of the total DDTs. A significant increasing trend in accumulation with size was found for PCB-52 (r_s = 0.512, p < 0.01) and PCB-114 (r_s = 0.421, p < 0.05). Comparison of our results with organochlorine contaminant (OC) pattern in some prey taxa suggest that contamination occurs primarily through the food web, with biomagnification factors of 0.14-6.99 which were positively correlated with the octanol-water partition coefficient (log K_ow; p < 0.05). This study, based upon a fairly large sample size collected mostly from incidentally captured animals over a short time period (June 2001-November 2002), present a temporal snapshot of OC contamination in wild, free-ranging loggerheads from Adriatic feeding grounds and provide a baseline for monitoring the regional OC trends in this endangered species.     

Aristolochic acid I: an investigation into the role of food crops contamination,as a potential natural exposure pathway

Environmental Geochemistry and Health - Aristolochic acid I (AAI) is a potent nephrotoxic and carcinogenic compound produced by plants of the Aristolochiaceae family and thoroughly investigated as...     

Polyols and Rigid Polyurethane Foams from Cashew Nut Shell Liquid

Cashew nut shell liquid (CNSL) is a natural aromatic oil consisting of a mixture of phenolic structures with a carboxyl group in ortho position and substituted in meta position with a hydrocarbon chain of 15 carbon atoms. The major component of CNSL is anacardic acid (90?%), which is easily decarboxylated to cardanol by distillation. The present work describes the synthesis of new biobased Mannich polyols for rigid polyurethane foams in two steps: synthesis of Mannich bases by reacting phenolic ring of cardanol with N-(2-hydroxyethyl)-1,3-oxazolidine followed by alkoxylation reactions. The polyols were characterized by wet methods (hydroxyl numbers, viscosity, acid value, density, water content, iodine value etc.), spectroscopic methods (FT-IR, ¹H NMR and ¹³C NMR) and by Gel Permeation Chromatography. The Mannich polyols from cardanol are excellent replacements for petrochemical derived Mannich polyols based on nonyl phenol. Cardanol-based polyols were used successfully for the preparation of rigid polyurethane foams of good physical?Cmechanical and fireproofing properties.