Overview of strontium-89,90 deposition measurements in Finland 1963-2005

In Finland the deposition of strontium-89 (⁹⁰Sr) and strontium-90 (⁹⁰Sr) has been monitored since the early 1960s. The measured cumulative ⁹⁰Sr deposition in 1963-2005 is on average 1200 Bq m⁻², of which 150 Bq m⁻² originates from the Chernobyl accident. Adding to this the deposition in 1945-1962 produces a value of 2040 Bq m⁻² for the cumulative deposition in Finland. The nuclear explosion-derived deposition up to 1985 obtained in this study, 1850 Bq m⁻², is in good agreement with the zonal ⁹⁰Sr deposition of 1740 Bq m⁻² in the 60°N-70°N latitude band estimated by UNSCEAR. The regional deposition patterns of ⁸⁹Sr and ⁹⁰Sr following the Chernobyl accident resemble those of the refractory nuclides such as ^239,240Pu and ⁹⁵Zr. The total deposition of Chernobyl-derived ⁹⁰Sr in Finland was about 5.3 × 10¹³ Bq. This activity corresponds to 0.027% of the reactor core inventory and 0.66% of the atmospheric emissions from the accident. The corresponding figures for ⁸⁹Sr are 4.5 × 10¹⁴ Bq, 0.023% and 0.56%, respectively.     

Heavy metals in bottom sediments of Lake Umbozero in Murmansk Region, Russia

Sediment cores collected from different locations of Lake Umbozero were studied with respect to concentration and mobility of trace and heavy metals Co, Cu, Fe, Mn, Ni, Pb, U, and Zn. Lake Umbozero is the second largest lake in the Murmansk Region and subjected to contamination by air-borne emissions and river transportation from the nearby metallurgical and mining industries. Unlike its neighboring, more industry-prone Lake Imandra, Lake Umbozero is relatively unexplored with respect to its state of pollution. In our study, metal distribution in sediments was found to vary with respect to the cores, although in general the concentrations were at the same level throughout the lake indicating uniform horizontal distribution of metals. When compared to Lake Imandra, the concentrations of most of the metals studied were significantly lower and represented the levels in sediments measured in lakes of Kola Peninsula located further off from industrial pollutant sources. An exception was Pb the concentration of which was at the same level as in Lake Imandra, probably due to long-distance transport. Sediment layers were subjected to four-step sequential extraction procedure to reveal the metal distribution in soluble, exchangeable, acid-soluble, and residual fractions. Indicative of their potential higher lability, Mn, U, and Zn were generally found in exchangeable fraction; as also Mn and U extensively in the acid-soluble fraction.     

Fluoride deposition in snow in the surroundings of a mixed fertilizer factory

The fluoride content of snow was determined at various distances from a mixed fertilizer factory in Siilinjärvi, central Finland. Elevated fluoride levels were observed at less than 2 km from the factory, and the highest concentrations close to the factory were about 600 μg of fluoride per liter of melt water. At unpolluted reference sites the fluoride content was about 6μg/1. The background level of fluoride in precipitation is discussed. An ion selective electrode and a simple calibration method were used in the analyses.     

Deposition of gamma emitters from Chernobyl accident and their transfer in lichen–soil columns

Lichen–soil column samples were taken from several locations in the Southern Finland between 1986 and 2006. Columns were divided into three parts, upper lichen, lower lichen and underlying soil, and their gamma emitting radionuclides, ¹³⁴Cs, ¹³⁷Cs, ¹⁰³Ru, ⁹⁵Zr, ¹⁰⁶Ru, ^110mAg, ¹²⁵Sb and ¹⁴⁴Ce, were measured with gamma spectrometry. Deposition values were calculated as Bq/m² for each sampling site. Distribution of various radionuclides in the three compartments as a function of time was determined. Both effective and ecological half-lives of all radionuclides were calculated for upper lichen, whole lichen and whole lichen–soil column. A linear relation was derived between the physical half-lives and effective half-lives for whole lichen and for whole lichen–soil column. Reindeer meat activity concentrations of various radionuclides and ensuing radiation doses to reindeer-herding people were also estimated for a hypothetical case where a similar high radioactive pollution, as was taken place in the Southern Finland, would have occurred in the reindeer-herding areas in the Finnish Lapland.     

Chlorophenols in lake bottom sediments: A retrospective study of drinking water contamination

Lake and brook bottom sediments were analyzed for chlorophenols to provide historical data of exposure assessment, after the water intake plant of a Finnish village had been found to be contaminated in 1987, and subsequently elevated non-Hodgkin lymphoma risk was detected. Highly elevated 2,3,4,6-tetrachlorophenol and pentachlorophenol levels were found in all four lake sediment cores investigated. The distribution was uneven with much higher concentrations in the estuary, in contrast to PCB compounds which were more evenly distributed within the basin. The inlet origin of the chlorophenols in the sediments was further supported by the regional distribution pattern of these compounds in the sediment and water along transects of the inlet and its tributaries. The composition of chlorophenol congeners in the sediments was similar to that in a commercial fungicide used by a local sawmill, but different from other sediment analyses reported in Finland, also implying a local source. Dating of three cores by Pb-210 and soot ball chronology indicated that the contamination of the watercourse started in the early 1970s at the latest but possibly earlier. This would provide the latency time required for tumour appearance in the 1970s and 1980s.     

Thermodynamics of tetracycline adsorption on silica

The adsorption of antibiotic tetracycline onto silica particles was investigated. The effects of pH, electrolyte concentration and temperature on the adsorption equilibrium were examined and the data correlated with a dual site adsorption model. Adsorption of tetracycline onto approximately 9% of the adsorption sites was found to be irreversible, whereas the rest exhibited Langmuir behaviour. Increasing pH of the solution had a strong negative effect on the adsorbed amounts. Adsorption decreased also with increasing ionic strength and temperature. The enthalpy and entropy of adsorption were found to be approximately −16 and −25 J/mol, respectively.     

Deposition of gamma emitters from Chernobyl accident and their transfer in lichen-soil columns

Lichen-soil column samples were taken from several locations in the Southern Finland between 1986 and 2006. Columns were divided into three parts, upper lichen, lower lichen and underlying soil, and their gamma emitting radionuclides, (134)Cs, (137)Cs, (103)Ru, (95)Zr, (106)Ru, (110m)Ag, (125)Sb and (144)Ce, were measured with gamma spectrometry. Deposition values were calculated as Bq/m(2) for each sampling site. Distribution of various radionuclides in the three compartments as a function of time was determined. Both effective and ecological half-lives of all radionuclides were calculated for upper lichen, whole lichen and whole lichen-soil column. A linear relation was derived between the physical half-lives and effective half-lives for whole lichen and for whole lichen-soil column. Reindeer meat activity concentrations of various radionuclides and ensuing radiation doses to reindeer-herding people were also estimated for a hypothetical case where a similar high radioactive pollution, as was taken place in the Southern Finland, would have occurred in the reindeer-herding areas in the Finnish Lapland.     

Phosphorus loss from different farming systems estimated from soil surface phosphorus balance

The phosphorus load originating from crop production and animal husbandry is a major contributor to the eutrophication of lakes, rivers and coastal waters. The P losses to surface waters may, however, differ drastically due to the diversity of agricultural production systems practised under contrasting environmental conditions. To assess the most problematic types of agriculture, we need information on the P load from different alternative farming practices. Such information cannot, however, be obtained solely from field runoff experiments, as the number of treatment combinations required to account for all relevant farming systems and environmental conditions far exceeds our research capabilities. To facilitate the comparison of P loads, we therefore need reasonably simple models. A key factor controlling the P load from agriculture is the past and present use of nutrients in fertilizers and manure in relation to a crop's uptake, i.e. the soil-surface balance of P. Here, we present a simple empirical model that relates the P surplus (or deficit) in a farm to the edge-of-field losses of algal-available P. Based on long-term fertilizer trials, the model first estimates the change in soil-test P of top soil with the aid of the soil-surface balance of P. Soil-test P is then used to approximate the concentration of dissolved reactive P in surface runoff and drainage flow, as adjusted for different P application types. The loss of particulate P is obtained from typical erosion rates. The model can be applied in life-cycle analyses and in assessing future developments. We illustrate use of the model by calculating the loss of algal-available P from conventional and organic crop and dairy farms located on clay and fine sand soils.     

Low-flow active and passive sampling of VOCs using thermal desorption tubes: theory and application at an offset printing facility

While air sampling techniques using adsorbent-based collection, thermal desorption and chromatographic analysis have found a niche in ambient air sampling, occupational applications have been more limited. This paper evaluates the use of thermal desorption techniques for low flow active and passive sampling configurations which allow conveniently long duration sampling in occupational settings and other high concentration environments. The use of an orifice enables flows as low as 0.5 ml min(-1) and sampling periods up to several days without significant biases. A model is used to predict sampling rates of a passive sampler encompassing an orifice, a void space, glass wool, and the adsorbent. Laboratory and field tests conducted at a commercial offset printing facility, which contained a variety of volatile organic compounds (primarily aromatic but also a few chlorinated and terpene compounds at levels from 1 to 67,000 microg m(-3)), are used to evaluate the approach. Tenax GR and Carbosieve SIII, both singly and together, were employed as adsorbents. Side-by-side tests comparing high flow, low flow and passive samplers show excellent agreement and high linearity (r = 0.95) for concentrations spanning nearly five orders of magnitude. Active samplers were tested at flows as low as 0.5 ml min(-1), compared to typical flows up to 40 ml min(-1). Passive samplers demonstrated a linear range and agreement with predictions for adsorbate loadings from approximately 1 ng to nearly 10 microg. Using a chemical mass balance receptor model, concentrations in the facility were apportioned to solvents, inks and other indoor and outdoor sources. Overall, the use of low flow active and passive sampling approaches employing thermal desorption techniques provides good performance and tremendous flexibility that facilitates use in many applications, including workplace settings.