内螺纹变截面铜管拉伸工艺的研究

此文提出了内螺纹变截面铜管分段拉仲一次成形新工艺,并就工艺因素对该管拉伸成形的影响进行了试验研究,从而为合理制订成形工艺提供了依据。     

金属加工过程中应力状态的分析方法

分析简单地拉伸、压缩和扭转的情况时,应力状态能容易地被确定.但是,实际上在金属加工过程中材料是承受复杂的应力状态,在模具——工件接触面上增加有摩擦力.而且,这些应力和摩擦力一般地沿着接触面变化.准确的计算或预测载荷、力、应力和温度,不但对设计适宜的设备是重要的,而且对研究工艺期间材料的变化过程也是重要的.本文将讨论材料变形过程中所运用的主要分析方法及其优缺点.     

圆形烟道烟尘采样点位置确定之正误

采样点位置的确定是烟尘测试中的一项基础工作。在全国沿用10多年的确定圆形圆形烟道烟尘采样点位置的计算表中的数据,经验算有60％有误;原来以烟道中心为基准的计算公式虽然正确,但实用性差。为了进一步完善烟气测试理论,提高监测质量,提出以烟道内壁为基准的新计算公式。运用新、旧2种计算公式得到一致的计算结果—新计算表,进一步证实了原计算表中的错误。     

Evaluation and selection of healthcare waste incinerators using extended sustainability criteria and multi-criteria analysis methods

Environment, Development and Sustainability - Disposal of healthcare waste is a key issue of environmental sustainability in the world. The amount of healthcare waste is increasing every day, and...     

Plasmonic silver/silver oxide nanoparticles anchored bismuth vanadate as a novel visible-light ternary photocatalyst for degrading pharmaceutical micropollutants

The degradation of pharmaceutical micropollutants is an intensifying environmental problem and synthesis of efficient photocatalysts for this purpose is one of the foremost challenges worldwide. Therefore, this study was conducted to develop novel plasmonic Ag/Ag₂O/BiVO₄ nanocomposite photocatalysts by simple precipitation and thermal decomposition methods, which could exhibit higher photocatalytic activity for mineralized pharmaceutical micropollutants. Among the different treatments, the best performance was observed for the Ag/Ag₂O/BiVO₄ nanocomposites (5 wt.%; 10 min's visible light irradiation) which exhibited 6.57 times higher photodegradation rate than the pure BiVO₄. Further, the effects of different influencing factors on the photodegradation system of tetracycline hydrochloride (TC-HCl) were investigated and the feasibility for its practical application was explored through the specific light sources, water source and cycle experiments. The mechanistic study demonstrated that the photogenerated holes (h⁺), superoxide radicals (?O₂^?) and hydroxyl radicals (?OH) participated in TC-HCl removal process, which is different from the pure BiVO₄ reaction system. Hence, the present work can provide a new approach for the formation of novel plasmonic photocatalysts with high photoactivity and can act as effective practical application for environmental remediation.     

铁碳促进O3/H2O2体系深度处理准好氧矿化垃圾床渗滤液尾水中难降解有机物

构建了铁碳-O_3/H_2O_2体系降解矿化垃圾床渗滤液尾水中有机物,并考察了体系O_3、铁碳及H_2O_2投加量、初始pH值和反应时间对铁碳-O_3/H_2O_2体系处理渗滤液尾水的影响.结果表明,在铁碳投加量为3 g·L~(-1),O_3投加量为9.798 mg·min~(-1),H_2O_2投加量为2 mL·L~(-1),初始pH值为3的条件下,反应10 min后,渗滤液尾水的COD和UV_(245)分别从711.96 mg·L~(-1)、0.19下降至295.04 mg·L~(-1)、0.10.类比实验结果表明,铁碳-O_3/H_2O_2体系对渗滤液尾水有机物具有较高的去除率,且可生化性得到提高(BOD/COD从0.04增加至0.40).紫外-可见和三维荧光光谱显示,废水中难降解有机物转化为小分子有机化合物且腐殖质的分子缩合度降低.最后,采用SEM-EDS、XRD和XPS技术对铁碳-O_3/H_2O_2体系的反应机理进行了解析,发现铁碳-O_3/H_2O_2反应的机理为铁碳微电解反应、铁氧化物-H_2O_2非均相芬顿反应、O_3/H_2O_2、铁碳-O_3非均相的高级氧化作用和铁基胶体对有机物的吸附沉淀作用.研究表明,铁碳-O_3/H_2O_2体系是一种能够有效去除矿化垃圾床渗滤液尾水中难降解有机物的方法.     

Bi-national assessment of the Great Lakes: SOLEC partnerships

Many administrative jurisdictions have authority over parts of the Great Lakes, sometimes with competing purposes as well as governance at differing scales of time and space. As demand increases for high quality information that is relevant to environmental managers, environmental and natural resource agencies with limited budgets must look to interdisciplinary, collaborative approaches for the collection, analysis and reporting of data. The State of the Lakes Ecosystem Conferences (SOLEC) were begun in 1994 in response to reporting requirements of the Great Lakes Water Quality Agreement between Canada and the U.S. The biennial conferences provide independent, science-based reporting on the state of health of the Great Lakes ecosystem components. A suite of indicators necessary and sufficient to assess Great Lakes ecosystem status was introduced in 1998, and assessments based on a subset of the indicators were presented in 2000. Because SOLEC is a multi-agency, multi-jurisdictional reporting venue, the SOLEC indicators require acceptance by a broad spectrum of stakeholders in the Great Lakes basin. The SOLEC indicators list is expected to provide the basis for government agencies and other organizations to collaborate more effectively and to allocate resources to data collection, evaluation and reporting on the state of the Great Lakes basin ecosystem.     

不锈钢壳体的冷挤压工艺及模具设计

壳体是机械中广泛使用的重要零件之一.采用冷挤压工艺可提高质量、降低成本.对不锈钢壳体成形工艺及模具设计作了详细讨论.