Development of Emission Factors for Polycarbonate Processing

Abstract

Emission factors for selected volatile organic compounds (VOCs) and particulate emissions were developed while processing eight commercial grades of polycarbonate (PC) and one grade of a PC/acrylonitrile-butadiene-styrene (ABS) blend. A small commercial-type extruder was used, and the extrusion temperature was held constant at 304 °C. An emission factor was calculated for each substance measured and is reported as pounds released to the atmosphere/million pounds of polymer resin processed [ppm (wt/wt)]. Scaled to production volumes, these emission factors can be used by processors to estimate emission quantities from similar PC processing operations.     

Estimation of Efficiency of Processing Soil Samples for Pesticide Residues Analysis

The efficiency of four sample processing methods was tested with eight different types of soils representing the major proportion of cultivated soils. The principle of sampling constant was applied for characterizing the efficiency of the procedures and testing the well-mixed status of the prepared soil. The test material was 14C-labeled atrazine that enabled keeping the random error of analyses ≤ about 1%. Adding water to the soil proved to be the most efficient and generally applicable procedure resulting in about 6% relative sample processing uncertainty for 20 g test portions. The expected error is inversely proportional to the mass of test portion. Smashing and manual mixing of soil resulted in about four times higher uncertainty than mixing with water. Grinding of soil is applicable for dry soils only, but the test procedure applied was not suitable for estimating a typical uncertainty of processing dry soil samples. Adding dry ice did not improve the efficiency of sample processing.     

Development of emission factors for polycarbonate processing

Emission factors for selected volatile organic compounds (VOCs) and particulate emissions were developed while processing eight commercial grades of polycarbonate (PC) and one grade of a PC/acrylonitrile-butadiene-styrene (ABS) blend. A small commercial-type extruder was used, and the extrusion temperature was held constant at 304 degrees C. An emission factor was calculated for each substance measured and is reported as pounds released to the atmosphere/million pounds of polymer resin processed [ppm (wt/wt)]. Scaled to production volumes, these emission factors can be used by processors to estimate emission quantities from similar PC processing operations.