Farm Crops Depredation by European Bison (Bison bonasus) in the Vicinity of Forest Habitats in Northeastern Poland

European bison, the largest mammal in Europe, after being exterminated in the wild and then restored during the 20th century is still listed by the International Union for Conservation of Nature (IUCN Red List of Threatened Species) as a species vulnerable to extinction. However, the increasing number of European bison, through creation of new and expansion of existing populations strongly increases the risk of human-bison conflict in the near future. We analyzed the depredation of farm crops by bison and the factors influencing the level of damage in the vicinity of two forest areas inhabited by bison in northeastern Poland. Between 2000 and 2010, the total cost of compensation was 196,200. The level of damage and amount of compensation was increasing from year to year in both forests and correlated with the number of bison. The majority of damage (57?% of cases) was recorded in winter (December-March). Snow depth and temperature did not influence the frequency of damage. The incidences of damage increased with decreasing distance from the woodland patches, therefore, 69?% of cases in Bia?owie?a Forest, and 80?% in Knyszyn Forest were recorded closer than 0.5?km from nearest woodland patch. The majority of the crops damaged by bison were cereals (61?%) but also hay (20?%) and rape (13?%). When compared to the availability of crops, bison strongly selected rape and rye in both regions. This study is the first addressing the increasing problem of human-bison conflict in re-introduced populations and analyzing long-term data on crop depredation. Such situations probably occur in the majority of growing and expanding bison populations, however, it has not yet to be monitored and is rather neglected in post-Soviet countries.     

Spatial and temporal variations of PM(2.5) concentration and composition throughout an urban area with high freeway density-the Greater Cincinnati study

The PM(2.5) concentration and its elemental composition were measured in the Cincinnati metropolitan area, which is characterized by intense highway traffic. The spatial and temporal variations were investigated for various chemical elements that contributed to the PM(2.5) fraction during a 1-year-long measurement campaign (December 2001-November 2002). The ambient aerosol monitoring was performed in 11 locations around the city during nine measurement cycles. During each cycle, four Harvard-type impactors were operating in parallel in specific locations to explore various factors affecting the PM(2.5) elemental concentrations. The sampling was performed during business days, thus assuring traffic uniformity. The 24-h PM(2.5) samples were collected on Teflon and quartz filters. Teflon filters were analyzed by X-ray fluorescence (XRF) analysis while quartz filters were analyzed by thermal-optical transmittance (TOT) analysis. In addition to PM(2.5) measurements, particle size-selective sampling was performed in two cycles using micro-orifice uniform deposit impactor; the collected fractionated deposits were analyzed by XRF. It was found that PM(2.5) concentration ranged from 6.70 to 48.3 mug m(-3) and had low spatial variation (median coefficient of variation, CV=11.3%). The elemental concentrations demonstrated high spatial variation, with the median CV ranged from 38.2% for Fe to 68.7% for Ni. For traffic-related trace metals, the highest concentration was detected in the city center site, which was close to a major highway. The particle size selective measurement revealed that mass concentration of the trace metals, such as Zn, Pb, Ni, as well as that of sulfur reach their peak values in the particle size range of 0.32-1.0 mum. Meteorological parameters and traffic intensity were not found to have a significant influence on the PM(2.5) elemental concentrations.     

Ziziphus spina-christi leaf extract attenuates mercuric chloride-induced liver injury in male rats via inhibition of oxidative damage

Environmental Science and Pollution Research - Heavy metal contamination including mercury (Hg) has become one of the most serious environmental problems facing humans and other living organisms....     

Management of hazardous fly-ash energy waste in the adsorptive removal of diclofenac by the use of synthetic zeolitic materials

Zeolite-carbon composites (Na-P1(C), Na-X(C)) and pure zeolites (Na-P1, Na-X) were synthesized from hazardous high-carbon fly ash waste (HC FA) via hydrothermal reaction with sodium hydroxide (NaOH). These solids were applied in the removal of diclofenac (DCF) from aqueous solution, with and without poly(acrylic acid) (PAA). The experiments included adsorption–desorption measurements, as well as electrokinetic and stability analyses. The obtained results showed that HC FA and Na-P1(C) had the greatest adsorption capacity towards DCF, i.e., 26.51 and 21.19 mg/g, respectively. PAA caused considerable decrease in the DCF adsorption due to the competition of both adsorbates of anionic character for active sites. For example, the adsorbed amount of DCF on Na-P1 without PAA was 14.11 mg/g, whereas the one measured with PAA was 5.08 mg/g. Most of prepared solids were effectively regenerated by the use of NaOH. Desorption degree reached even 73.65% in the single systems (with one adsorbate) and 97.24% in the mixed ones (with two adsorbates). Zeolitic materials formed suspensions of rather low stability, which underwent further deterioration in the organic molecules presence. All the results obtained in this study indicated that HC FA can be successfully managed in the removal of organic substances.

     

Changes in the liver proteome in apoE knockout mice exposed to inhalation of silica nanoparticles indicate mitochondrial damage and impairment of ER stress responses associated with microvesicular steatosis

Environmental Science and Pollution Research - The adverse effects of air pollution on the cardiovascular system have been well documented. Nonalcoholic fatty liver disease (NAFLD) is an...     

Information presentation compatibility in a simple digital control panel design: eye-tracking study

Various designs of typical digital control panels were analyzed experimentally from both the effectiveness and efficiency points of view. Subjects performed information comparison tasks aimed at keeping vehicle velocity at the same level. The experiment involved two versions of speedometers for displaying current and target velocities (clock-face and digital). The stimuli were also differentiated by the target velocity value (20, 50 and 80?km/h) and the correct response type (increase or decrease). Subjects’ performance results along with the eye-tracking data were qualitatively and quantitatively analyzed for all 24 experimental conditions.     

Remediation aspect of microbial changes of plant rhizosphere in mercury contaminated soil

Phytoremediation, an approach that uses plants to remediate contaminated soil through degradation, stabilization or accumulation, may provide an efficient solution to some mercury contamination problems. This paper presents growth chamber experiments that tested the ability of plant species to stabilize mercury in soil. Several indigenous herbaceous species and Salix viminalis were grown in soil collected from a mercury-contaminated site in southern Poland. The uptake and distribution of mercury by these plants were investigated, and the growth and vitality of the plants through a part of one vegetative cycle were assessed. The highest concentrations of mercury were found at the roots, but translocation to the aerial part also occurred. Most of the plant species tested displayed good growth on mercury contaminated soil and sustained a rich microbial population in the rhizosphere. The microbial populations of root-free soil and rhizosphere soil from all species were also examined. An inverse correlation between the number of sulfur amino acid decomposing bacteria and root mercury content was observed. These results indicate the potential for using some species of plants to treat mercury contaminated soil through stabilization rather than extraction. The present investigation proposes a practical cost-effective temporary solution for phytostabilization of soil with moderate mercury contamination as well as the basis for plant selection.     

Approaches for prevention and environmental management of novel COVID-19

Environmental Science and Pollution Research - The World Health Organization (WHO) recognized a novel coronavirus as the causative agent of a new form of pneumonia. It was subsequently named...     

A sceptical vision of the environmental Kuznets curve: The case of sulfur dioxide

The aim of this paper is to check the hypothesis for the environmental Kuznets curve for sulfur dioxide. This involved analysis of: 1. the theoretical basis of the model; 2. the technical problem of SO2 generation; 3 the kind of information used in the estimations; 4. changes in the structure of electric energy production; 5. improvements in energy efficiency; and 6. the recent introduction of cleaning mechanisms in a favourable political context. The conclusion is that, if it is possible to prove the existence of environmental Kuznets curve models, their utility as instruments of economic policy is debatable.     

Determining Attenuation of Impulse Noise With an Electrical Equivalent of a Hearing Protection Device

Determining the effectiveness of impulse noise attenuation with hearing protection devices (HPDs) is an important part of their selection. Measuring impulse noise parameters under an HPD would involve exposing subjects to impulses with a high peak sound pressure level. This paper presents a computational method of determining impulse noise parameters under the cups of earmuffs. Calculations are done using the transfer function of earmuffs, determined with Shaw’s electrical equivalent of an HPD, taking into account the design parameters of earmuffs. The developed method was used for calculations in the presence of impulse noise generated by gunshots. To verify the computational method, the results of these calculations were compared with the results of measurements.