Assessment of imidacloprid toxicity on reproductive organ system of adult male rats

In the current study it was aimed to investigate the toxicity of low doses of imidacloprid (IMI) on the reproductive organ systems of adult male rats. The treatment groups received 0.5 (IMI-0.5), 2 (IMI-2) or 8 mg IMI/kg body weight by oral gavage (IMI-8) for three months. The deterioration in sperm motility in IMI-8 group and epidydimal sperm concentration in IMI-2 and IMI-8 groups and abnormality in sperm morphology in IMI-8 were significant. The levels of testosterone (T) and GSH decreased significantly in group IMI-8 compared to the control group. Upon treatment with IMI, apoptotic index increased significantly only in germ cells of the seminiferous tubules of IMI-8 group when compared to control. Fragmentation was striking in the seminal DNA from the IMI-8 group, but it was much less obvious in the IMI-2 one. IMI exposure resulted in elevation of all fatty acids analyzed, but the increases were significant only in stearic, oleic, linoleic and arachidonic acids. The ratios of 20:4/20:3 and 20:4/18:2 were decreased and 16:1n-9/16:0 ratio was increased. In conclusion, the present animal experiments revealed that the treatment with IMI at NOAEL dose-levels caused deterioration in sperm parameters, decreased T level, increased apoptosis of germ cells, seminal DNA fragmentation, the depletion of antioxidants and change in disturbance of fatty acid composition. All these changes indicate the suppression of testicular function.     

Estimation of suspended sediment concentration in rivers using acoustic methods

Acoustic Doppler current meters (ADV, ADCP, and ADP) are widely used in water systems to measure flow velocities and velocity profiles. Although these meters are designed for flow velocity measurements, they can also provide information defining the quantity of particulate matter in the water, after appropriate calibration. When an acoustic instrument is calibrated for a water system, no additional sensor is needed to measure suspended sediment concentration (SSC). This provides the simultaneous measurements of velocity and concentration required for most sediment transport studies. The performance of acoustic Doppler current meters for measuring SSC was investigated in different studies where signal-to-noise ratio (SNR) and suspended sediment concentration were related using different formulations. However, these studies were each limited to a single study site where neither the effect of particle size nor the effect of temperature was investigated. In this study, different parameters that affect the performance of an ADV for the prediction of SSC are investigated. In order to investigate the reliability of an ADV for SSC measurements in different environments, flow and SSC measurements were made in different streams located in the Aegean region of Turkey having different soil types. Soil samples were collected from all measuring stations and particle size analysis was conducted by mechanical means. Multivariate analysis was utilized to investigate the effect of soil type and water temperature on the measurements. Statistical analysis indicates that SNR readings ob tained from the ADV are affected by water temperature and particle size distribution of the soil, as expected, and a prediction model is presented relating SNR readings to SSC mea surements where both water temperature and sediment characteristics type are incorporated into the model. The coefficients of the suggested model were obtained using the multivariate anal ysis. Effect of high turbidity conditions on ADV performance was also investigated during and after rain events.     

Polychlorinated biphenyls and organochlorine pesticides in amniotic fluids of pregnant women in south-central Turkey†

The concentrations of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) were determined in amniotic fluid of 200 pregnant women from the Cukurova region of Turkey. The concentrations of OCPs [hexachlorocyclohexane (HCH), hexachlorobenzene (HCB), dichlorodiphenyl trichloroethane (p,p′-DDT), and various metabolites], and different PCB congeners (28, 52, 101, 118, 138, 153, 180) were determined by gas chromatography with electron capture detection as follows: HCB 6.6 ± 4.7, ΣHCH 21.6 ± 14.2, ΣDDT 12.5 ± 7.5, and ΣPCBs 74.0 ± 54 ng mL^?1. Correlations of maternal or gestational age and levels of OCPs and PCBs were not significant. The levels of these organochlorine compounds (OCs) were below detection limit for 5% of the samples, 80% contained more than one OC. This study illustrates that prenatal exposure of a fetus to OCs is prevalent in the Cukurova region.     

Effects of cerium oxide nanoparticles on biochemical and oxidative parameters in marigold leaves

Abstract

The effects of suspensions of cerium oxide nanoparticles sprayed onto marigold seedlings (Calendula officinalis L.) at concentrations between 50 and 3200 mg L^?1 were studied. At concentrations of 50 and 100 mg L^?1, the nanoparticles had a slight positive effect on some growth parameters, but at higher concentrations they caused severe oxidative damage. Activities of phenylalanine ammonia lyase and lipoxygenase increased from 400 mg L^?1 upward, tyrosine ammonia lyase from 1600 mg L^?1. Ascorbate and glutathione contents decreased from 400 mg L^?1 upwards.     

An Overview of Solid Waste Management and Plastic Recycling in Qatar

Municipal solid waste management (MSWM) constitutes one of the most crucial health and environmental problems facing authorities in the Arabian Gulf. Recent literature on current solid waste management (SWM) in Qatar has been reviewed in this paper, and a focused study has been carried out to provide a review on the total amount of municipal solid waste generated, stored, collected, disposed as well as the constituents of the waste. The analysis showed that Qatar produced around 2,000,000 tons of solid municipal waste annually, corresponding to a daily generation rate per capita of about 2.5 kg. About 60% of MSW is organic material and about 300 kg is composed daily. Landfill and composting is considered the most appropriate waste disposal techniques in Qatar. Um-Al-Afai landfill has nearly 80% of MSW. Because of the increased migration in Qatar, there is a sharp rise in the volume and also in the variety of solid waste. It is important to alleviate societal concerns over the increased rate of resource consumption and waste production; thus, policy makers have encouraged recycling and reuse strategies to reduce the demand for raw materials and to decrease the quantity of waste going to landfill. An example of the benefit of mechanical recycling of plastics compared to land filling and composting was conducted by GaBi 4 life cycle analysis tool which showed the benefits to the global warming and human toxicity. Recycling is the favored solution for plastic waste management, because it has a lower environmental impact on the defined impact categories, from Global Warming Potential (GWP) and Human Toxicity Potentials (HTP) indicators.     

Estimating tree bole volume using artificial neural network models for four species in Turkey

Tree bole volumes of 89 Scots pine (Pinus sylvestris L.), 96 Brutian pine (Pinus brutia Ten.), 107 Cilicica fir (Abies cilicica Carr.) and 67 Cedar of Lebanon (Cedrus libani A. Rich.) trees were estimated using Artificial Neural Network (ANN) models. Neural networks offer a number of advantages including the ability to implicitly detect complex nonlinear relationships between input and output variables, which is very helpful in tree volume modeling. Two different neural network architectures were used and produced the Back propagation (BPANN) and the Cascade Correlation (CCANN) Artificial Neural Network models. In addition, tree bole volume estimates were compared to other established tree bole volume estimation techniques including the centroid method, taper equations, and existing standard volume tables. An overview of the features of ANNs and traditional methods is presented and the advantages and limitations of each one of them are discussed. For validation purposes, actual volumes were determined by aggregating the volumes of measured short sections (average 1 meter) of the tree bole using Smalian's formula. The results reported in this research suggest that the selected cascade correlation artificial neural network (CCANN) models are reliable for estimating the tree bole volume of the four examined tree species since they gave unbiased results and were superior to almost all methods in terms of error (%) expressed as the mean of the percentage errors.     

Green preparation of a novel red mud@carbon composite and its application for adsorption of 2,4-dichlorophenoxyacetic acid from aqueous solution

This study reports the eco-friendly preparation of a novel composite material consisting of red mud and carbon spheres, denoted as red mud@C composite, and its application for the removal of 2,4-dichlorophenoxyacetic acid herbicide (2,4-D) from aqueous solution. The preparation route has a green approach because it follows the low-energy consuming one-step hydrothermal process by using starch as a renewable carbon precursor and red mud as a waste from aluminum production industry. Characterization of the red mud@C composite was performed by FT-IR, TGA, SEM, TEM, BET, XRD, and Raman microscopy analyses. The batch adsorption studies revealed that the red mud@C composite has higher 2,4-D adsorption efficiency than those of the red mud and the naked carbon spheres. The maximum removal at initial pH of 3.0 is explained by considering the pKa of 2,4-D and pH of point of zero charge (pH_pzc) of the composite material. The adsorption equilibrium time was 60 min, which followed the pseudo-second-order kinetic model together with intra-particle diffusion model. The isotherm analysis indicated that Freundlich isotherm model better represented the adsorption data, with isotherm parameters of k [15.849 (mg/g) (mg/L)^?1/n] and n (2.985). The prepared composite is reusable at least 5 cycles of adsorption-desorption with no significant decrease in the adsorption capacity.

     

Urban/rural division in environmental justice frameworks: revealing modernity-urbanisation nexus in Turkey’s small-scale hydropower development

Environmental justice frameworks predominantly focus on exploration of socio-environmental inequalities faced by racial, ethnic, religious, cultural and low-income groups. This article aims to expand this mainstream focus of the environmental justice concept on these groups by conceptualising urban/rural division as a group difference, based on which rural communities face with socio-environmental burdens of environmental policies in relation to their urban counterparts. It is based on the analysis of Turkey’s small-scale hydroelectricity power plant (HPP) development policies, referring to the planning and constructions of approximately 1500 hydropower plants across the country, along with country’s modernist agenda, i.e. achievement of economic development, social progress and urban transformation of Turkey. These power plants are also strongly associated with numerous socio-economic, environmental and cultural impacts on local rural communities and local environments with dozens of local opposition movements, while favouring needs, interests and lifestyles of urban communities. This point deserves a systematic conceptualisation within the environmental justice frameworks as it helps to further explain deep causes of socio-environmental inequalities particularly in developing country contexts. Thus, this article is built on such a conceptualisation arguing the necessity to integrate urban/rural division as a separate group difference to environmental justice frameworks by examining modernisation and urbanisation nexus in Turkey’s small-scale HPP development process.     

Tree species diversity and its relationship to stand parameters and geomorphology features in the eastern Black Sea region forests of Turkey

We studied the effects of stand parameters (crown closure, basal area, stand volume, age, mean stand diameter number of trees, and heterogeneity index) and geomorphology features (elevation, aspect and slope) on tree species diversity in an example of untreated natural mixed forest stands in the eastern Black Sea region of Turkey. Tree species diversity and basal area heterogeneity in forest ecosystems are quantified using the Shannon-Weaver and Simpson indices. The relationship between tree species diversity basal area heterogeneity stand parameters and geomorphology features are examined using regression analysis. Our work revealed that the relationship between tree species diversity and stand parameters is loose with a correlation coefficient between 0.02 and 0.70. The correlation of basal area heterogeneity with stand parameters fluctuated between 0.004 and 0.77 (R2). According to our results, stands with higher tree species diversity are characterised by higher mean stand diameter number of diameter classes, basal area and lower homogeneity index value. Considering the effect of geomorphology features on tree species or basal area heterogeneity we found that all investigated relationships are loose with R < or = 0.24. A significant correlation was detected only between tree species diversity and aspect. Future work is required to verify the detected trends in behaviour of tree species diversity if it is to estimate from the usual forest stand parameters and topography characteristics.     

Cloud point extraction of trace cyanide from environmental waters for indirect flame atomic absorption spectrometric determination

A method has been developed for indirect determination of cyanide in environmental waters based on cloud point extraction (CPE), preconcentration and determination by flame atomic absorption spectrometry (FAAS). The method was based on reduction of Cu(II) to Cu(I) in the presence of cyanide and complexation of the produced Cu(I)(CN)₂^? with gallocyanin (GC⁺) as an ion-pairing reagent at pH 4.0, followed by its extraction into polyethyleneglycol mono-p-nonylphenylether (Ponpe 7.5). Selectivity was improved with the use of suitable masking agents. Various factors influencing separation and preconcentration of cyanide have been investigated, and conditions were optimized, allowing determination of cyanide in the range of up to 1.2 mg L^?1 with a detection limit of 0.00045 mg L^?1. The method has been applied to the determination of cyanide in environmental waters, the results being in agreement with those obtained by a reference method.