Mutagenic and cytotoxic potential of Endosulfan and Lambda-cyhalothrin - In vitro study describing individual and combined effects of pesticides

Excessive use of pesticides poses increased risks to non target species including humans. In the developing countries, lack of proper awareness about the toxic potential of pesticides makes the farmer more vulnerable to pesticide linked toxicities, which could lead to diverse pathological conditions. The toxic potential of a pesticide could be determined by their ability to induce genetic mutations and cytotoxicity. Hence, determination of genetic mutation and cytotoxicity of each pesticide is unavoidable to legislate health and safety appraisal about pesticides. The objective of current investigation was to determine the genotoxic and cytotoxic potential of Endosulfan（EN） and Lambda-cyhalothrin（LC）; individually and in combination. 3-（4,5-Dimethylthiazol-2-yl）-2,5-Diphenyltetrazolium Bromide（MTT） assay was utilized to determine cytotoxicity, while two mutant histidine dependent Salmonella strains（TA98, TA100） were used to determine the mutagenicity of EN and LC.Moreover, mutagenicity assay was conducted with and without S9 to evaluate the effects of metabolic activation on mutagenicity. Even though a dose dependent increase in the number of revertant colonies was detected with EN against both bacterial strains, a highly significant（p 〈 0.05） increase in the mutagenicity was detected in TA98 with S9. In comparison, data obtained from LC revealed less mutagenic potential than EN. Surprisingly,the non-mutagenic individual-concentrations of EN and LC showed dose dependent mutagenicity when combined. Combination of EN and LC synergistically induced mutagenicity both in TA98 and TA100. MTT assay spotlighted comparable dose dependent cytotoxicity effects of both pesticides. Interestingly, the combination of EN and LC produced increased reversion and cytotoxicity at lower doses as compared to each pesticide, concluding that pesticide exposure even at sub-lethal doses can produce cytotoxicity and genetic mutations, which could lead to carcinogenicity.     

Levels,distribution profile,and risk assessment of polychlorinated biphenyls (PCBs) in water and sediment from two tributaries of the River Chenab,Pakistan

The first study aimed to investigate the polychlorinated biphenyl (PCB) concentration level, spatial distribution pattern, and ecological risk assessment of water and sediment samples from two tributaries (Nullah Aik and Palkhu) of the River Chenab, Punjab Province, Pakistan. A total of 32 PCB congeners were analyzed, and PCB concentration in sediment and water samples ranged between 0.80 and 60 ng/g and 0.20 and 28 ng/L, respectively, where tetra-CBs and tri-CBs dominated over other studied PCB homologs. Dioxin toxicity equivalency (TEQ) was calculated and PCB-126 and PCB-169 showed the higher TEQ values compared with the WHO guidelines, and sediment samples were more toxic than the water samples. The results of the present study should be considered seriously by government authorities to take a proper action against unchecked discharge of contaminants in ecological integrities; otherwise, there may be drastic results in the near future.     

Trace metals in Ganges soft-shell turtle (Aspideretes gangeticus) from two barrage: Baloki and Rasul, Pakistan

The concentration of nine metals was measured in liver, kidney, heart, muscle, plastron, and carapace of Aspideretes gangeticus from Rasul and Baloki barrages, Pakistan. The results indicated that metal concentration were significant different among tissues of Ganges soft-shell turtles. However, higher concentrations of Co (5.12 μg/g) and Ni (1.67 μg/g) in liver, Cd (0.41 μg/g) in heart, Fe (267.45 μg/g), Cd (2.12 μg/g) and Mn (2.47 μg/g) in kidney, Cd (0.23 μg/g), Cu (2.57 μg/g), Fe (370.25 μg/g), Mn (5.56 μg/g), and Pb (8.23 μg/g) in muscle of A. gangeticus were recorded at Baloki barrage than Rasul barrage. Whereas mean concentrations of Pb (3.33 μg/g) in liver, Co (1.63 μg/g), Cu (11.32 μg/g), Pb (4.8 μg/g) and Zn (144.69 μg/g) in heart, Co (4.12 μg/g) in muscle, Ni (1.31 μg/g), Pb (2.18 μg/g), and Zn (9.78 μg/g) in carapace were recorded higher at Rasul barrage than Baloki barrage. The metals followed the trend Fe > Zn > Ni > Cu > Mn > Pb > Cr > Co > Cd. Metals of toxicological concern such as Cr, Pb, and Cd were at that level which can cause harmful effects to turtles. The results provide baseline data of heavy metals on freshwater turtle species of Pakistan.     

Control of combustion-generated nitrogen oxides by selective non-catalytic reduction

Controlling nitrogen oxides (NO(x)) emissions is becoming a daunting technical challenge as increasingly strict emission limits are being imposed. The stringent regulations have prompted the innovation and characterization of NO(x) control technologies suitable for various applications. This paper presents a review on NO(x) removal techniques with particular reference to selective non-catalytic reduction (SNCR) technology. This includes initially how SNCR emerged as a technology along with a comparison with other relevant technologies. A review of various features related to selective non-catalytic gas phase injection of ammonia and ammonium salts (as reducing agent) is presented. The use of urea solution as a reducing agent and its performance in laboratory and pilot scale tests as well as large-scale applications is also discussed. Use of cyanuric acid as a potential reducing agent is also presented. The underlying reaction mechanisms have been reviewed for ammonia, urea and cyanuric acid for the explanation of various observations. Computational fluid dynamics (CFD) modeling as applied to SNCR is also presented. Subsequently the use of SNCR coupled with other in-combustion and post-combustion NO(x) control techniques is elaborated. Additionally, a two-stage NO(x) removal strategy to control un-reacted ammonia slip and to improve overall efficiency is discussed. At the end a summary is given which highlights various areas needing further research.     

Removal of a cationic dye from aqueous solutions by adsorption onto bentonite clay

The ability of bentonite to remove malachite green from aqueous solutions has been studied for different adsorbate concentrations by varying the amount of adsorbent, temperature, pH and shaking time. Maximum adsorption of the dye, i.e. >90% has been achieved in aqueous solutions using 0.05 g of bentonite at a pH of 9. Thermodynamic parameters such as ΔH°, ΔS° and ΔG° were calculated from the slope and intercept of the linear plots of ln K_D against 1/T. Analysis of adsorption results obtained at 298, 308, 318 and 328 K showed that the adsorption pattern on bentonite seems to follow the Langmuir, Freundlih and D–R isotherms. The temperature increase reduces adsorption capacity by bentonite, due to the enhancement of the desorption step in the mechanism. The numerical values of sorption free energy (E_a) of 1.00–1.12 kJ mol⁻¹ indicated physical adsorption. The kinetic data indicated an intraparticle diffusion process with sorption being first order. The rate constant k was 0.526 min⁻¹. The concentration of malachite green oxalate was measured before and after adsorption by using UV–Vis spectrophotometer.     

Metal contamination of surface soils of industrial city Sialkot,Pakistan: a multivariate and GIS approach

In this study concentrations of selected metals viz., Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Na, Ni, Pb and Zn in surface soils of Sialkot city known worldwide for tanneries and pharmaceutical industries were measured to assess the status of urban soil pollution and to identify sources of contamination. Hierarchical cluster analysis (HACA) indicated concentrations of Mg and Ca related to parent rock material, Cd, Co, and Pb with traffic related activities, Cr, Cu, Ni and Zn either associated with automobiles activities or industrial pollution and Fe, K and Na related with anthropogenic activities or lithogenous materials. Correlation analyses and principal component analysis based on factor analysis confirmed the results of HACA. Spatial distribution maps exhibited relatively higher concentrations of Cd, Co, Cu, Ni, Pb, Cr and Zn along traffic routes in the city and streams. The results highlighted concentration of Cd, Ni, Cr, Zn, and Pb measured in urban soil exceeded the permissible limit of surface soils and advocated an imperative need for detailed baseline investigations of spatial distribution of heavy metals and other contaminants for the formulation of geochemical database that should be made available to stakeholder involved in monitoring, assessment and conservation of soil contamination for future planning and management of the Sialkot city.     

Detection of Human Adenovirus,Rotavirus, and Enterovirus in Tap Water and Their Association with the Overall Quality of Water in Karachi,Pakistan

Food and Environmental Virology - Drinking water supplies in the developing world often serve as a biosphere for various organisms. Viral gastroenteritis is a neglected area of research in...     

A blessing in disguise: new insights on the effect of COVID-19 on the carbon emission,climate change,and sustainable environment

Environmental Science and Pollution Research - COVID-19, declared by the World Health Organization (WHO) to be a pandemic, has affected greenhouse gas emissions and contributed to the uncertainty...     

Geo-based model of intrinsic resilience to climate change: an approach to nature-based solution

A substantial amount of researches have been done on the understanding and assessment of resilience from multiple perspectives, e.g., ecological, social, economic, and disaster management; however, recent international approach is trending toward more systematic and comprehensive risk assessment processes. Pivotal element of such approach is to emphasizing on promoting resilience in the face of climate change impacts. Conceptualization and identification of parameters to assess climate change resilience is one of the remaining challenges that academia is facing. Reviewing the principles of the climate change resilience highlighted in the literature, the goal of this study is to introduce a theoretical model about the climate change resilience concept to facilitate and enhance future climate change resilience-related researches. The model proposed in this study is named as the climate change resilience of place (C-CROP) model, a geo-based model which is designed to assess climate change resilience for any geographic region with an approach to the incorporation of nature-based solution (NBS). C-CROP model considers vulnerability, exposure, sensitivity to climate change on one side; another side is co-benefit, climate proofing, and disservices of proposed NBS. An operational framework of the C-CROP model is also proposed, that allows spatially explicit assessment of climate change resilience in real world by developing an indicator-based framework and comprehensive mapping using the geospatial approach. Therefore, this model includes vulnerability hotspots identification; better understanding of the pathways of resilience; and solutions (i.e., NBS) to infer the impacts and effectiveness of resilience-building interventions.