Removal of copper from a copper sulphate solution using an ultrasonic-electrolysis process

The application of ultrasonic-electrolysis process for the removal of copper is studied.In the ultrasonic field cavitation acts as jets and agitates the solution and breaks the barrier layer between the cathode surface and the bulk of the solution.Thus increases metal deposition on the cathode surface.The results show that an ultrasonic field is successful for the removal of low copper concentrations in solution.     

Magnetic nanoparticles incorporation into different substrates for dyes and heavy metals removal—A Review

Environmental Science and Pollution Research - Substantial discharge of hazardous substances, especially dyes and heavy metal ions to the environment, has become a global concern due to...     

Modeling of Cr contamination in the agricultural lands of three villages near the leather industry in Kasur,Pakistan, using statistical and GIS techniques

Kasur is one of the hubs of leather industry in the Punjab, Pakistan, where chrome tanning method of leather processing is extensively being used. Chromium (Cr) accumulation levels in the irrigation water, soil, and seasonal vegetables were studied in three villages located in the vicinity of wastewater treatment plant and solid waste dumping site operated by the Kasur Tanneries Waste Management Agency (KTWMA). The data was interpreted using analysis of variance (ANOVA), clustering analysis (CA), and principal component analysis (PCA). Interpolated surface maps for Cr were generated using the actual data obtained for the 30 sampling sites in each of the three villages for irrigation water, soil, and seasonal vegetables. The level of contamination in the three villages was directly proportional to their distance from KTWMA wastewater treatment plant and the direction of water runoff. The highest level of Cr contamination in soil (mg kg^?1) was observed at Faqeeria Wala (37.67), intermediate at Dollay Wala (30.33), and the least in Maan (25.16). A gradational variation in Cr accumulation was observed in the three villages from contaminated wastewater having the least contamination level (2.02–4.40 mg L^?1), to soil (25.16–37.67 mg kg^?1), and ultimately in the seasonal vegetable crops (156.67–248.33 mg kg^?1) cultivated in the region, having the highest level of Cr contamination above the permissible limit. The model used not only predicted the current situation of Cr contamination in the three villages but also indicated the trend of magnification of Cr contamination from irrigation water to soil and to the base of the food chain. Among the multiple causes of Cr contamination of vegetables, soil irrigation with contaminated groundwater was observed to be the dominant one.     

Wastewater reuse in Muslim countries: An Islamic perspective

Recycling wastewater seems to have become a highly useful technique for meeting the shortage of fresh water in all parts of the world. It seems all the more important for Muslim countries because a large number of these countries face acute fresh water shortage. This paper views the problem from an Islamic viewpoint, that is, in the light of the Qur'n, theSunnah, andFiqh works.In Islamic law, water is classified into three categories oftahr,thir, andmutanajjis. The last two categories can be transmuted intotahr water and thus may be used for all mundane as well as religious purposes if they are assimilated into the overall supply oftahr water. This would be lawful from the Islamic viewpoint even without treating the water. To make use of modern technology in order to recycle wastewater effluents after treatment seems quite in keeping with the spirit and letter of the Islamic teachings.     

Advanced microbial fuel cell for waste water treatment—a review

Environmental Science and Pollution Research - Petroleum, coal, and natural gas reservoir were depleting continuously due to an increase in industrialization, which enforced study to identify...     

Chlorination and water quality monitoring within a public drinking water supply in Rawalpindi Cantt (Westridge and Tench) area, Pakistan

Concern over the presence of fecal coliform in public drinking water supplies has been expressed in recent years in Pakistan since it has been regarded as pathogenic organism of prime importance in gastroenteritis. Two major drinking water distribution systems in the Cantt area of Rawalpindi district covering the Westridge and Tench areas was monitored over a 2-month period to determine the prevalence of fecal coliform and chlorine residual. The collected samples were examined for total chlorine, free chlorine residual, chloramines, total coliforms, fecal coliforms, and turbidity. The drinking water quality monitoring in the distribution network was performed by collecting samples from water source, overhead reservoir, and residential taps. In the Westridge area, total chlorine varied from the lowest value of 0.27 mg/L at Station # W-5 to the highest value of 0.42 mg/L at Station # W-2, total coliforms varied from 1.1 to 3.6 most probable number (MPN)/100 mL with presence of Escherichia coli in all samples, total dissolved solids (TDS) ranged from 199.5 to 205 mg/L, conductivity fluctuated between 399 and 411 microS/cm, and turbidity varied from 0.43 to 0.73 NTU. In the Tench area, the value of total chlorine ranged from 0.14 mg/L at Station # T-7 to 0.55 mg/L at Station # T-1. Total coliform varied from 3.6 to 5.1 MPN/100 mL and fecal coliform were detected at all the stations except at Station # T-1. TDS ranged from 201.4 to 257 mg/L, conductivity varied from 343 to 513 microS/cm, and turbidity ranged between 0.66 and 1.55 NTU. It is recommended to the respective agencies to ensure that the chlorine residual is available at consumer end.     

Evaluation of CMIP5 models and ensemble climate projections using a Bayesian approach: a case study of the Upper Indus Basin,Pakistan

Environmental and Ecological Statistics - The availability of a variety of Global Climate Models (GCMs) has increased the importance of the selection of suitable GCMs for impact assessment studies....     

Optimization of alkaline extraction of natural dye from Henna leaves and its dyeing on cotton by exhaust method

The alkaline conditions for extraction of natural dye from Henna leaves were optimized and the resulting extract was used to further optimize its dyeing conditions on cotton by exhaust method. Dyeings without any mordant were compared with those obtained with premordanting and postmordanting with alum and iron. It was found that dyeings produced with alkaline extracts of Henna leaves have better colour strength than the dye extracts obtained in distilled water. Furthermore, dyeings with alkaline extracts have moderate to good fastness properties and that mordanting did not result in any significant improvement in fastness properties. Finally, in comparative studies between synthetic and this natural dye, it was inferred that natural dye has good potential to act as co-partner with synthetic dye.