Greenhouse impacts of anthropogenic CH4 and N2O emissions in Finland

The Finnish anthropogenic CH₄ emissions in 1990 are estimated to be about 250 Gg, with an uncertainty range extending from 160 to 440 Gg. The most important sources are landfills and animal husbandry. The N₂O emissions, which come mainly from agriculture and the nitric acid industry are about 20 Gg in 1990 (uncertainty range 10–30 Gg). The development of the emissions to the year 2010 is reviewed in two scenarios: the base and the reduction scenarios.According to the base scenario, the Finnish CH₄ emissions will decrease in the near future. Emissions from landfills, energy production, and transportation will decrease because of already decided and partly realized volume and technical changes in these sectors. The average reduction potential of 50%, as assumed in the reduction scenario, is considered achievable.N₂O emissions, on the other hand, are expected to increase as emissions from energy production and transportation will grow due to an increasing use of fluidized bed boilers and catalytic converters in cars. The average reduction potential of 50%, as assumed in the reduction scenario, is optimistic.Anthropogenic CH₄ and N₂O emissions presently cause about 30% of the direct radiative forcing due to Finnish anthropogenic greenhouse gas emissions. This share would be even larger if the indirect impacts of CH₄ were included. The contribution of CH₄ can be controlled due to its relatively short atmospheric lifetime and due to the existing emission reduction potential. Nitrous oxide has a long atmospheric lifetime and its emission control possiblities are limited consequently, the greenhouse impact of N₂O seems to be increasing even if the emissions were limited somehow.     

Meeting emission targets under uncertainty—the case of Finnish non-emission-trading sector

The European Union (EU) has set a target to reduce its greenhouse gas (GHG) emissions at least 10 % below the 2005 levels by 2020 in the non-Emission Trading Sector (non-ETS). As part of this, each Member State has a binding national emission limitation target for the non-ETS sector. Finland’s target, examined as a case study in this paper, is to reduce emissions at least 16 % below 2005 levels by 2020. The objective of this study is to find cost optimal mitigation portfolios that meet Finland’s reduction target and to analyze the risks of not attaining the emission target or exceeding the assumed costs. The question was addressed with a stochastic optimization model, Stochastic Optimization of non-ETS Emissions (SONETS) selecting separate mitigation measures that meet the target on expectation. The results show that optimal portfolios include relatively high uncertainty both in costs and achieved reductions. The prices of crude oil and diesel, and the abatement cost of reducing hydrofluorocarbon (HFC) emissions seem to account for the majority of uncertainty regarding total costs. The baseline predictions for various non-ETS subsectors (such as transport and agriculture) were found to have the greatest contribution to the uncertainty of attaining emission target. The results also show that some abatement actions are chosen in nearly all efficient portfolios, while other actions are seldom chosen. For example replacing oil burners in the end of technical life time or recovery of methane (CH₄) from waste are often chosen whereas ban of landfilling of organic waste is chosen extremely seldom. It also seems that the results are somewhat sensitive to the inclusion or exclusion of the interdependencies of mitigation measures.     

Overview of strontium-89,90 deposition measurements in Finland 1963-2005

In Finland the deposition of strontium-89 (⁹⁰Sr) and strontium-90 (⁹⁰Sr) has been monitored since the early 1960s. The measured cumulative ⁹⁰Sr deposition in 1963-2005 is on average 1200 Bq m⁻², of which 150 Bq m⁻² originates from the Chernobyl accident. Adding to this the deposition in 1945-1962 produces a value of 2040 Bq m⁻² for the cumulative deposition in Finland. The nuclear explosion-derived deposition up to 1985 obtained in this study, 1850 Bq m⁻², is in good agreement with the zonal ⁹⁰Sr deposition of 1740 Bq m⁻² in the 60°N-70°N latitude band estimated by UNSCEAR. The regional deposition patterns of ⁸⁹Sr and ⁹⁰Sr following the Chernobyl accident resemble those of the refractory nuclides such as ^239,240Pu and ⁹⁵Zr. The total deposition of Chernobyl-derived ⁹⁰Sr in Finland was about 5.3 × 10¹³ Bq. This activity corresponds to 0.027% of the reactor core inventory and 0.66% of the atmospheric emissions from the accident. The corresponding figures for ⁸⁹Sr are 4.5 × 10¹⁴ Bq, 0.023% and 0.56%, respectively.     

Exposure to methylhexahydrophthalic anhydride (MHHPA) in two workplaces of the electric industry

Methylhexahydrophthalic anhydride (MHHPA) is a hardener for hot-cured epoxy resins employed as insulators in the electric industry. MHHPA has only been measured as an ingredient with other alicyclic anhydrides, albeit there are also large processes which use only MHHPA. We collected MHHPA vapour in a set of devices: Teflon filter, glass spiral, TenaxTA tube connected consecutively together. Elution was performed with a solvent mixture of methyl-tert-butyl ether (70%), acetonitrile (30%), and acetic anhydride (0.5%). By capillary GC-ECD, the regression was linear (0.9994) in the practical low concentration range of 0.04-1 microg ml(-1) being equal to 0.001-0.035 mg m(-3) in 30 l of air. The exposure was measured in two factories manufacturing electric appliances. The assembled objects were first impregnated with a liquid epoxy/hardener mixture, and then the resin hardened at elevated temperature. In condenser manufacturing, the operators' 8 h exposure ranged from 0.068 to 0.118 mg m(-3), and the short-term exposure was during operation at ovens mean 1.90 mg m(-3). The impregnation of coiled resistors and transfer of them to ovens caused the worst exposures, short-term mean 3.846 mg m(-3) and long-term mean 2.191 mg m(-3). During the 'baking', the ovens were closed and evacuated, but when the hot objects were moved out of the ovens, they continued during chilling to emit MHHPA, mean 0.366 mg m(-3). In the adjacent areas, assembling, control rooms, offices, the exposure was still significant, 0.017-0.043 mg m(3), due to leaks from the high exposure areas. Mechanical general ventilation and local exhausts were functioning. Respirators were available for short supervising of the hot equipment.     

Extension of EU Emissions Trading Scheme to Other Sectors and Gases: Consequences for Uncertainty of Total Tradable Amount

Emissions trading in the European Union (EU), covering the least uncertain emission sources of greenhouse gas emission inventories (CO₂ from combustion and selected industrial processes in large installations), began in 2005. During the first commitment period of the Kyoto Protocol (2008–2012), the emissions trading between Parties to the Protocol will cover all greenhouse gases (CO₂, CH₄, N₂O, HFCs, PFCs, and SF₆) and sectors (energy, industry, agriculture, waste, and selected land-use activities) included in the Protocol. In this paper, we estimate the uncertainties in different emissions trading schemes based on uncertainties in corresponding inventories. According to the results, uncertainty in emissions from the EU15 and the EU25 included in the first phase of the EU emissions trading scheme (2005–2007) is ±3% (at 95% confidence interval relative to the mean value). If the trading were extended to CH₄ and N₂O, in addition to CO₂, but no new emissions sectors were included, the tradable amount of emissions would increase by only 2% and the uncertainty in the emissions would range from −4 to +8%. Finally, uncertainty in emissions included in emissions trading under the Kyoto Protocol was estimated to vary from −6 to +21%. Inclusion of removals from forest-related activities under the Kyoto Protocol did not notably affect uncertainty, as the volume of these removals is estimated to be small.     

Accumulation of Chernobyl-derived 137Cs in bottom sediments of some Finnish lakes

The amount and vertical distribution of Chernobyl-derived 137Cs in the bottom sediments of some Finnish lakes were studied. Sediment and surface water samples were taken in 2000 and 2003 from 12 stations in nine lakes and the results were compared with those obtained in corresponding surveys carried out in 1969, 1978, 1988 and 1990. Each of the five deposition categories of Chernobyl fallout in Finland were represented. The depth profiles of 137Cs in the sediments showed considerable variety in the lakes studied. The peak values varied between 1.5 and 46 kBq kg(-1) dry wt. The size and shape of the peak did not always correlate with the amount of deposition in the area, but on the other hand, reflected differences in sedimentation processes in different lakes. In some of the lakes the peak still occurred in the uppermost (0-2 cm) sediment layer, but in an extreme case the peak occurred at a depth of 22-23 cm corresponding to a sedimentation rate of 16 mm year(-1) during the 14 years after the Chernobyl accident. The total amounts of 137Cs in sediments varied from 15 to 170 kBq m(-2) at the sampling stations studied. Since 1990, the amounts have continued to increase slightly in two lakes, but started to decrease in the other lakes. In most of the lakes, the total amounts of 137Cs in sediments were about 1.5-2 times higher than in local deposition. In two lakes, the ratio was below 1, but in one case 3.2. Compared with the total amounts of 137Cs at the same stations in the late 1960s and 1970s, the values were now at their highest, at about 60-fold. The most important factors affecting 137Cs values in sediments were the local amount of deposition and the type of the lake and the sediment, but in addition, there were a number of other factors to be considered.     

Keeping the blood flowing—plasminogen activator genes and feeding behavior in vampire bats

The blood feeding vampire bats emerged from New World leaf-nosed bats that fed on fruit and insects. Plasminogen activator, a serine protease that regulates blood coagulation, is known to be expressed in the saliva of Desmodus rotundus (common vampire bat) and is thought to be a key enzyme for the emergence of blood feeding in vampire bats. To better understand the evolution of this biological function, we studied the plasminogen activator (PA) genes from all vampire bat species in light of their feeding transition to bird and subsequently mammalian blood. We include the rare species Diphylla ecaudata and Diaemus youngi, where plasminogen activator had not previously been studied and demonstrate that PA gene duplication observed in Desmodus is not essential to the vampire phenotype, but relates to the emergence of predominant mammalian blood feeding in this species. Plasminogen activator has evolved through gene duplication, domain loss, and sequence evolution leading to change in fibrin-specificity and susceptibility to plasminogen activator inhibitor-1. Before undertaking this study, only the four plasminogen activator isoforms from Desmodus were known. The evolution of vampire bat plasminogen activators can now be linked phylogenetically to the transition in feeding behavior among vampire bat species from bird to mammalian blood. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Occupational Safety and Health in Finland

In Finland, occupational safety is the responsibility of the employer, while the occupational safety and health laws are enforced by the Labour Inspection Service, an organization of the state. The Labour Inspection is divided in 11 administrative districts, and it employs 360 professionals. They are mandated to carry out site visits without prearranged appointments to inspect safe work situations, working hours, construction safety, or any aspect of accident risks. The inspectors are also mandated to verify the existence of sufficient occupational health services as prescribed by the Occupational Health Services Act for all employees. The occupational health services are typically provided by enterprise-owned medical departments, by mutually owned health care centers, by private practitioners, or by municipal health care centers. The latter are required by law to provide all services as prescribed by the legislation to anyone who comes to the facility. This situation is prevalent in the countryside, where there are very few private caregiving centers. Declaring occupational accidents and disease cases is mandatory, and the Inspection districts examine all accidents to establish causes and consequences, and to initiate prosecution in case of criminal negligence. Labour Inspection Districts are also notified of the new occupational disease cases as they are declared to insurance companies. Insurance for occupational disease, accidents, and death is an obligation of the employer, although they can choose the insurance company. The medical confidentiality between the workers and their occupational health care providers is very strict. Official statistics are maintained by the state Statistics Finland organization, and they may be used, for example, for research purposes by scientific institutes like the Finnish Institute of Occupational Health. Construction industry accounts for 25% of all fatal accidents (120 cases per 1 million working hours), followed by mechanical, wood, metal, machinery, and pulp and paper industry (10% each of fatal accidents) with rates ranging from 100–160 cases per 1 million working hours. There are some 5,000 occupational disease cases per year (rate 22/10,000 employed). The major disease categories include repetitive strain injuries (1,300 cases), respiratory allergies (600 cases), occupational skin diseases (1,000 cases), and 900 cases of noise-caused hearing loss. In 1998, 589 cases of asbestos-related diseases were reported.     

Colony foundation and polygyny in the ant Formica podzolica

We document the variation in number of queens occurring naturally in founding, immature and mature nests of the ant Formica podzolica, and compare development of colonies and survivorship of queens in experimental nests started with 1–16 foundresses. Number of queens per nest was associated with stage of colony development. Most nests were monogynous, but 20% of immature nests (n = 66) and 25% of mature nests (n = 92) were oligogynous or polygynous. Colonies were usually established by single queens (i.e., haplometrosis), but colony establishment by multiple queens (i.e., pleometrotis) was also common, occurring in 27% of founding nests (n = 492). Foundress groups in the field were small ( = 1.47 ± 0.04 queens/nest), and large groups experienced high mortality and low productivity in artificial nests. Therefore, the many queens (up to 140) in some immature and mature colonies were probably secondarily pleometrotic. Experimental nests started with 1–4 queens were more successful than those initiated by 8 or 16 queens. Small groups (2–4 queens) produced more pupae before the first nests reared workers than single foundresses or larger groups (8 or 16 queens). Although single foundresses were less productive than queens in small groups, they experienced greater survivorship and less weight loss than queens in pleometrotic associations. Besides low productivity, queen mortality and weight loss were greatest in large groups.     

The role of CH4 and N2O emission reductions in the cost-effective control of the greenhouse gas emissions from Finland

The reduction of carbon dioxide (CO₂) emissions may be quite expensive and it is necessary to consider reduction measures for other anthropogenic greenhouse gases, such as methane (CH₄) and nitrous oxide (N₂O) as well. Their contribution to the total GHG emission from Finland is about 15–20%. In Finland most of the CH₄ emissions are due to waste management, agriculture and burning processes. N₂O emissions originate from burning processes, agriculture, industry and atmospheric deposition of nitrogen. The cost-effective reduction of the Finnish GHG emissions has been studied with the EFOM-ENV model, which is a quasi-dynamic linear energy system optimisation model. The target function to be minimised is the total discounted cost for the modelled system. In this study the model has been expanded to cover all well-known anthropogenic CO₂, CH₄ and N₂O sources and reduction measures. The results indicate it is economic to reduce the emissions of CO₂, CH₄ and N₂O in Finland. It is profitable to exploit the economic reduction potential of CH₄ and N₂O, because then the abatement of CO₂ emissions does not need to be as extensive as when the reduction is aimed only at CO₂ emissions. The inclusion of CH₄ and N₂O decreases the annual reduction costs about 20% in the year 2010.