Removal of arsenic from wastewater using iron compound: Comparing two different types of adsorbents in the context of LCA

A study was carried out in order to compare the environmental performance of two different types of adsorbents in removing arsenic (As) from wastewater. A FeCl₃-based adsorbent and a poly-Fe-based adsorbent were first synthesized and their abilities in adsorbing As from wastewater were investigated in terms of the adsorption density and the rate of adsorption. Here, it should be noted that the main material being used in the synthesis of the poly-Fe-based adsorbent was a waste product, known as polyferric sulfate or poly-Fe in short, which exits the manufacturing process of titanium dioxide.Both adsorbents were then compared in the context of life-cycle assessment (LCA). In other words, the experimental results (i.e. the value of the adsorption density and the rate of adsorption) were input into the LCA model in order to assess the environmental performance of each adsorbent in removing arsenic. An estimate for the environmental burden of each option was finally calculated as the sum of the depletion of abiotic resources (ADP), the global warming potential (GWP), the acidification potential (AP), the photo-oxidant formation potential (POCP), the eutrophication potential (EP), and the human toxicity potential (HTP). The main finding of this study was that the adsorption of arsenic by using the poly-Fe-based adsorbent is more attractive treatment option in the environmental protection point of view than the adsorption by using the FeCl₃-based adsorbent, which generates a relatively larger environmental burden.     

Detection of Rotavirus Strains in Freshwater Clams in Japan

Bivalve molluscan shellfish like clams and oysters, etc., are capable to bioaccumulate surrounding contaminants from waters into their digestive systems and posing serious threats of food poisoning. Detection of rotaviruses (RVs) in shellfish is of particular importance because RVs are prone to genome reassortment resulting in the emergence of new RV variants that may compromise vaccine safety. Herein, we have detected the wild-type RVs and Rotarix/RotaTeq vaccine strains in freshwater clams collected on the riverside, Kawasaki city, from July 2019 to January 2020 and correlated the detected genotypes with that of gastroenteritis cases of nearby clinics to understand the transmission of RVs in the environment. The wild-type RVs were detected in 62 (64.6%) out of 96 freshwater clams in every study month: July, September, November, and January that are considered as off-season for RV infections. The most frequent genotypes were G2 (42.9%), G8 (28.6%), G3 (14.3%), G1 (7.1%), and G10 (7.1%), which remained comparable with genotypic distribution found in the clinical samples over the last few years indicating that these RVs may accumulate in clams since a long time. However, G10 genotype was detected in clam but not in clinical samples suggesting the presence of asymptomatic infection or RVs could be carried out from a long distance. Importantly, vaccine strains, RotaTeq (1%) but not Rotarix (0%), were also detected in a clam. Attention must be paid to monitoring the potential transmission of wild-type and vaccine RV strains in the environment to prevent the emergence of new variants generated from genome reassortment with vaccine strains.

     

Development of a catalytic cracking process for converting waste plastics to petrochemicals

The catalytic degradation of polyolefin using H-gallosilicates was examined using a bench-scale reactor (0.8kg/h) with semicontinuous feeding and the following plastics: (1) low-density polyethylene (LDPE) pellets; (2) linear low-density polyethylene (L-LDPE) pellets; (3) high-density polyethylene (HDPE) pellets; (4) polypropylene (PP) pellets; (5) polyolefin obtained from pulverized industrial waste plastics. The yields of liquid compounds from these materials, which were aromatics in most cases, ranged from 55wt% to 68wt%. With an increase in the ratio of total reactant to catalyst, the liquid yield remained the same. Yields of benzene, toluene, and xylenes (BTXs) decreased rapidly to below 50wt% at a ratio of more than 30. Differences in this ratio for BTXs were always small and were independent of the material. Only about half of the gas product was propane with a fresh catalyst. When the experiments were repeated, propylene, isobutane, and isobutene were found to increase.     

Suppressive effect of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like polychlorinated biphenyls transfer from feed to eggs of laying hens by activated carbon as feed additive

In this study, we investigated the suppressive effect of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (DL-PCBs) transfer from the feed to the eggs of laying hens by using activated carbon as a feed additive. Four groups of six hens (White Leghorn egg-layers; age, 11 weeks) were housed as two control groups and two exposure groups for a period of 20 weeks. Two control groups were fed with either the basal feed “Control” or basal feed additing activated carbon “Control + C”. Another two exposure groups were fed with feed contaminated (about 6 ng TEQ kg⁻¹ feed) by standard solutions of PCDDs/PCDFs and DL-PCBs “Exposure” alone and contaminated feed adding activated carbon “Exposure + C”. There was no significant effect on each groups for the growth rate, biochemical blood components, and egg production: these were around the standard levels for poultry in general. Moreover the results in this study showed the availability of activated carbon as a feed additive owing to the reduction in the risk of food pollution by PCDDs/PCDFs and DL-PCBs. The concentration in the eggs of the Exposure group gradually increased following the start of egg-laying but reached a steady state after about 1 month. In contrast, the concentration for the Exposure + C group was stationary and below the maximum EU level (6 pg TEQ g⁻¹ fat). In comparison to the Exposure group, the Exposure + C group showed a significant decline in the percentage of bioaccumulation into the egg. This reduction due to activated carbon was also observed in the muscle and abdominal fat. The reductions were compound- and congener-dependent for DL-PCBs as follows: PCDDs/PCDFs, non-ortho-PCBs, and mono-ortho-PCBs were more than 90%, 80%, and 50%, respectively, irrespective of the type of tissues. Fat soluble vitamin concentrations in the eggs of the Exposure + C group showed lower trends than the Exposure group. The γ-tocopherol and α-tocopherol concentrations in eggs of Exposure + C group showed a significant reduction of about 40%. However, the addition of activated carbon into animal feed could obviate the remote potential for accidents causing unintentional food pollution with PCDDs/PCDFs and DL-PCBs.