Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

基于复杂系统建模的水管理政策研究进展

基于Agent的建模方法（ABSS）通过自下而上的方式，考察系统中主体的不同状态和行为特征、主体与环境的作用、主体之间的作用，来表征系统的宏观特征，是进行复杂社会环境系统分析和政策研究的重要手段，在水资源、水环境管理系统中得到了有效的应用。本文在大量文献调研的基础上，讨论了ABSS建模方法的基本原理、主要特征、系统构成、分类方法和开发工具等特征，总结了其供水系统发展、水资源分配和流域水资源管理、农业土地和水资源利用、居民用水行为、农业污染控制及人类活动的水环境影响等方面的应用，分析了其在研究内容、研究方法、研究结果等方面的发展趋势，讨论了利用该方法研究我国水资源管理和水污染控制政策的必要性和重要性。     

A fragment constant QSAR model for evaluating the EC50 values of organic chemicals to Daphnia magna.

The quantitative relationship between the median effective concentration (EC50) of organic chemicals to Daphnia magna and the number of molecular fragments was investigated based on experimental EC50 values for 217 chemicals derived from the literature. A fragment constant model was developed based on a multivariate linear regression between the number of fragments and the logarithmically transformed reciprocal values of EC50. Functional correction factors were introduced into the model. The model was verified using an independent set of randomly selected data. The mean residual of the final model was 0.4 log-units. The robustness of the model was discussed based on the results of three jackknife tests.     

灰色协调度模型在产业用水系统分析中的应用

揭示产业用水系统的时空动态发展规律，探讨其内部的协调关系，是开展节水型社会建设规划，实现水资源可持续利用的关键。然而，目前对产业用水系统的协调性分析还缺乏较为有效的理论和方法。以往在利用协调度模型进行用水系统有序度研究时，通常采用两段叙述的线性分段函数表示，较不适用于描述产业用水系统内部要素的非线性结构。因此，针对产业用水系统的特性，利用灰关联原理建立有序度函数，以建立更适于用水系统分析的灰色协调度模型。利用该模型对上海市1997~2005年产业用水系统进行实证研究，结果显示：上海市产业用水系统基本有序，发展比较协调，其用水综合效益较大，但距离最优状态尚有潜力可挖；其中，农业用水子系统的发展较为欠缺，在未来用水规划中应予以重视。     

Processes involved in uptake and release of nitrogen dioxide from soil and building stones into the atmosphere

Atmospheric NO₂ was taken up by samples of various soils and building stones. The NO₂ uptake rate constants were highest in soil samples taken during the summer months. However, the NO₂ uptake rate constants of the soils and building stones were not significantly correlated with any of the following variables: moisture, pH, ammonium, nitrite, or nitrate. NO₂ uptake by soil and stone was not abolished by autoclaving indicating a chemical uptake process. NO₂ uptake by acidic and air-dry soils and stones resulted in nearly stoichiometric reduction of NO₂ to NO. This reduction was enhanced by the addition of ferrous iron and was further enhanced by incubation under 1 ppmv SO₂. The results suggest that NO₂ reduction may be coupled to oxidation of ferrous to ferric iron which may be reduced again by atmospheric SO₂ thus regenerating the ferrous iron content of the soil or stone. Conversion of NO₂ to NO was not observed in neutral or/and moist soils and stones. NO₂ was also taken up by purified and sterilized quartz sand moistend with water. This uptake was enhanced by addition of humic material but not by addition of bacteria which both had been extracted from genuine soil. Under most conditions, only uptake but no release of NO₂ was observed. However, NO₂ was released in air-dry soils that were heated to 45–65°C, or in ammonium-fertilized soil or stone that was drying up at room temperature. Under the latter conditions mimicking field practice, the NO₂ release reached rates that were similar to the NO release rates.     

Prenatal diagnosis of congenital cystic adenomatoid malformation of the lung by fetal lung biopsy

A case of type III congenital cystic adenomatoid malformation of the lung was successfully diagnosed prenatally by fetal lung biopsy. We performed this procedure at 22 weeks of gestation, using a biopsy gun system under ultrasound guidance. The pregnancy was undisturbed by the procedure but as the condition was incompatible with life, an abortion was performed. The diagnosis was confirmed at post-mortem examination. Fetal lung biopsy appears to be a useful method for prenatal diagnosis of fetal lung disorders.     

金属加工过程中应力状态的分析方法

分析简单地拉伸、压缩和扭转的情况时,应力状态能容易地被确定.但是,实际上在金属加工过程中材料是承受复杂的应力状态,在模具——工件接触面上增加有摩擦力.而且,这些应力和摩擦力一般地沿着接触面变化.准确的计算或预测载荷、力、应力和温度,不但对设计适宜的设备是重要的,而且对研究工艺期间材料的变化过程也是重要的.本文将讨论材料变形过程中所运用的主要分析方法及其优缺点.     

湖北省土地资源遥感调查与评价

根据1999年TM影像解译了湖北省土地利用现状，然后以土地利用现状图为基础，采用地理信息系统技术，结合湖北省的实际情况，选择土壤、地形、坡度等评价因子，对湖北省土地资源进行了适宜性评价，简要地将全省土地资源划分为九等。评价结果表明：湖北省水热条件好，土地适宜性广，宜农林牧业同时利用的土地广泛分布；但是该省的基本农田面积小，土地垦殖率高，低产田面积大，后备耕地资源严重不足；土地利用结构与土地资源的供给条件、利用要求不相适宜，利用效益末得到充分发挥。     

生态社区综合评价指标体系的初步探讨

生态社区的出现和发展一直广受关注，建立生态社区综合评价指标体系对于生态社区的实践和发展具有重要的意义。本文通过对社区可持续发展理论，生态平衡理论以及生态社区本身系统特点的探讨，尝试建立一个综合评价指标体系，同时对评价指标体系应体现的功能，以及评价指标体系构建的原则做了初步探讨。