A simply fabricated microfluidic device integrated with a fluorescence detection system has been developed for on-line determination of ammonium in aqueous samples. A 365-nm light-emitting diode (LED) as an excitation source and a minor band pass filter were mounted into a polydimethylsiloxane (PDMS)-based microchip for the purpose of miniaturization of the entire analytical system. The ammonium sample reacted with o-phthaldialdehyde (OPA) on-chip with sodium sulfite as reducing reagent to produce a fluorescent isoindole derivative, which can emit fluorescence signal at about 425 nm when excited at 365 nm. Effects of pH, flow rate of solutions, concentrations of OPA-reagent, phosphate and sulfite salt were investigated. The calibration curve of ammonium in the range of 0.018-1.8 μupg/mL showed a good linear relationship with R2 = 0.9985, and the detection limit was (S/N = 3) 3.6 × 10-4 μupg/mL. The relative standard deviation was 2.8% (n = 11) by calculating at 0.18 μupg/mL ammonium for repeated detection. The system was applied to determine the ammonium concentration in rain and river waters, even extent to other analytes fluorescence detection by the presented device. 相似文献
Thirteen isomers of branched para-nonylphenols (para-NP) in three technical mixtures were isomer-specifically determined using their synthesized standards by SIM of structurally specific ions, m/z 135, 149 or 163 with GC–MS. Of the 13 isomers, four isomers, 4-(2,4-dimethylheptan-4-yl)phenol, 4-(4-methyloctan-4-yl)phenol, 4-(3-ethyl-2-methylhexan-2-yl)phenol (3E22NP) and 4-(2,3-dimethylheptan-2-yl)phenol synthesized for their determinations were first used as standard substances. The 13 isomers in the technical mixtures individually occurred at mass percent portion of more than 2%. The total mass percent portions in the mixtures from Tokyo Chemical Industry (TCI), Aldrich, and Fluka covered with 89 ± 2%, 75 ± 4% and 77 ± 2%, respectively. The abundance of 4-(3,6-dimethylheptan-3-yl)phenol in the three mixtures was the largest with 11.1 ± 2% to 9.9 ± 0.3%, while that of 4-(2-methyloctan-2-yl)phenol was the smallest with 2.9 ± 0.3% to 3.0 ± 0.2%. Additionally, structures of four new isomers of more than 1% portion present in a technical mixture were elucidated as two pairs of diastereomeric isomers: two types of 4-(3,4-dimethylheptan-4-yl)phenol (344NP) and those of 4-(3,4-dimethylheptan-3-yl)phenol (343NP). By estrogenic assay of 13 isomers with yeast estrogen screen system, the activity of 3E22NP was the highest, while that of 4-(3-methyloctan-3-yl)phenol was the least. Their relative activities to that of 3E22NP were individually calculated. Estrogenic equivalent concentrations of the three technical mixtures were predictively evaluated. The ratio of the EEC to the conventional concentration, total mass percent portions of the 13 isomers in technical mixtures were 0.208 for TCI, 0.206 for Aldrich and 0.205 for Fluka. The predicted estrogenic activity of measured concentration of para-NP in technical mixtures was approximately 5-fold greater than the measured estrogen agonist activity. 相似文献
Two sets of new diastereomeric 4-nonylphenol (NP) isomers [4-(3,4-dimethylheptan-4-yl)phenol (344NP, NP-J, L) and 4-(3,4-dimethylheptan-3-yl)phenol (343NP, NP-K, P)] were separated from a commercial NP mixture. The mixture of these diastereomers was synthesized at the same time by a single Friedel-Crafts reaction of 3,4-dimethyl-4-heptanol and phenol, and the mixture was separated into individual NPs by HPLC equipped with Hypercarb column. For the first time, in this study the stereostructure-estrogenic activity relationship of NP diastereomers was investigated. The NP isomers (NP-L and NP-P) having the beta-methyl group over the benzene ring were found to be 2-4 times more estrogenic than their diastereomers (NP-J and NP-K). In the case of the other set of diastereomer [4-(3,5-dimethylheptan-3-yl)phenol, (353NP, NP-E, G)] containing gamma-methyl group in the molecule, the gamma-methyl proton signal (delta 0.49) in the more estrogenic isomer (NP-G) also appeared in a higher field than the corresponding methyl signal (delta 0.76) of the less estrogenic isomer (NP-E). 相似文献
Pesticide residues in five freshwater areas that are directly affected by rice paddy effluents in southern Japan were measured to determine their maximum concentrations and temporal variations. Water samples were collected every week during the 2005 rice planting season in Kagoshima Prefecture and stations were established in Amori River, Sudo River, Nagaida River (that drains into the bigger Kotsuki River), rice paddy drainage canal, and wastewater reservoir (that collects effluents from rice paddy fields). Of the 14 target pesticides examined, a total of 11 were detected in all stations. Mefenacet, fenobucarb, and flutolanil were the three pesticides with the highest maximum concentrations and were also detected frequently. Analysis of temporal variations of pesticides showed that herbicides had relatively higher concentrations in the earlier stages of the rice planting season, while insecticides and fungicides had relatively higher concentrations at the later stages. There was no significant difference among stations with regards to the temporal patterns of the top three pesticides. The calculated toxic units were less than 1 in all stations, implying low or negligible environmental risk of pesticides detected to freshwater organisms. 相似文献
The effects of water-extractable organic matter (WEOM) from compost-like materials on peroxidative stress were investigated for hydroponic culture of barley exposed to Cd. In the presence of WEOM, lipoxygenase activity and malondialdehyde, indices of peroxidative stress in barley, were significantly reduced, compared to those with Cd alone (5 μM) for a 30-d culture (p < 0.05). In addition, Cd uptake in the presence of WEOM samples was significantly lower than that in their absence (p < 0.05). These results indicate that the addition of WEOM can be effective in mitigating the peroxidative stress in barley exposed to Cd. Of the total Cd in the solution, 7–8% was complexed with WEOM, indicating that the complexation of Cd with WEOM is a minor factor in reducing Cd-induced stress in barley. The WEOM sample was purified by cation-exchange column and ultrafiltration to remove the nutrient minerals, such as Ca, Mg and Fe. When the purified WEOM was employed for hydroponic culture in the presence of Cd, significant decreases in peroxidative stress and Cd uptake were observed (p < 0.05). These results show that the organic components in WEOM contribute to the mitigation of peroxidative stress in barley exposed to Cd. 相似文献
Microplastic pollution is occurring in most ecosystem, yet their presence in high altitude clouds and their influence on cloud formation and climate change are poorly known. Here we analyzed microplastics in cloud water sampled at the summits of Japan mountains at 1300–3776 m altitude by attenuated total reflection imaging and micro-Fourier transform infrared spectroscopy. We observed nine microplastics including polyethylene, polypropylene, polyethylene terephthalate, polymethyl methacrylate, polyamide 6, polycarbonate, ethylene–propylene copolymer or polyethylene–polypropylene alloy, polyurethane, and epoxy resin. Microplastic were fragmented, with mean concentrations ranging from 6.7 to 13.9 pieces per liter, and with Feret diameters ranging from 7.1 to 94.6 μm. Microplastics bearing hydrophilic groups such as carbonyl and/or hydroxyl groups were abundant, suggesting that they might have acted as condensation nuclei of cloud ice and water. Overall, our finding suggest that high-altitude microplastics cloud influence cloud formation and, in turn, might modify the climate.
Measures for vehicle exhaust emissions aimed at reducing either air pollution or global warming could have counterproductive effects on one another. Increasing diesel passenger vehicles, which generally have lower CO2 emissions than gasoline counterparts, leads to increasing particulate matter (PM) emissions, while gasoline has lower PM emissions than diesel. It is said that stringent limits on PM emission factors discourages improved CO2 emission factors. Without including both effects in a risk evaluation, one cannot evaluate whether the total risk is reduced or not. Hence, we evaluated representative exhaust emission measures based on risk evaluation for both air pollution and global warming. Considering consumer choice between diesel and gasoline passenger vehicles and emissions standards adopted in Japan from 1995 to 2005, we built five cases for vehicle policy evaluation. For each case, we estimated disability-adjusted life years (DALY) as an index of human health risk caused by lung cancer linked to inhalation exposure of elemental carbon in PM as well as due to global warming linked to CO2. The results of our risk evaluation reveal that the case adopting the 2005 new long-term Japanese emission standard reduces the human health risk caused by lung cancer due to air pollution by 0.6 × 103 DALY, but would increase the risk due to global warming by 31.9 × 103 DALY compared with the case of adopting EURO 4, for the same conditions of passenger vehicle choice from 1995. These results suggest that the characteristics of Japanese emissions standards are mainly designed to reduce air pollution. 相似文献
Environmental Chemistry Letters - The abundance of humic-like substances in the atmosphere has received considerable attention since these substances play an important role in various atmospheric... 相似文献
Rapid economic growth in Asia and the increasing transboundary movement of secondary resources will increasingly require both
3R endeavors (reduce, reuse, recycle) in each country and appropriate control of international material cycles. Recently,
managing electrical and electronic waste (E-waste) has become an important target for domestic and international material
cycles from the viewpoints of environmental preservation and resource utilization efficiency. To understand the current status
of E-waste issues in the context of international material cycles and to discuss the future tasks related to achieving 3R
in the region, we organized the National Institute for Environmental Studies (NIES) E-waste Workshop in December 2004. This
article reviews past studies on E-waste and briefly describes the topics presented and discussions held at the workshop. The
topics at the workshop included E-waste generation, recycling systems, international trade, and environmental impacts. In
addition, we discussed various issues such as terminology, current environmental concerns, and possible solutions. Transboundary
shipments of E-waste should be conducted taking into consideration the concept of sustainable development. The direction of
future research and possible collaborations are also discussed. 相似文献