Trends in background levels of persistent organic pollutants at Kosetice observatory, Czech Republic.2) Part II. Aquatic and terrestrial environments 1996-2005

A multimedia sampling of ambient air, wet deposition, surface water, sediment, soil and biota has been performed at Kosetice background observatory in the southern Czech Republic since 1988. An integrated monitoring approach was applied to assess the current state, anthropogenic impacts, and possible future changes of terrestrial and freshwater environments. Average PCB concentrations in the individual matrices calculated from ten years of sampling on multiple sites varied between 2 ng g(-1) in sediment and 7 ng g(-1) in soil or moss. DDT concentrations were lower in moss and needles (2 ng g(-1) and 4 ng g(-1), respectively) than in sediment (11 ng g(-1)) and soil (20 ng g(-1)), while the HCH level was higher in moss and needles (5 ng g(-1) and 6 ng g(-1), respectively) than in soil or sediment (1 ng g(-1) and 2 ng g(-1), respectively). The highest average level of PAHs was found in soil (600 ng g(-1)), while it was lower in needles (230 ng g(-1)), moss (210 ng g(-1)) or sediment (210 ng g(-1)). Time related trends of concentration levels of persistent organic pollutants in all matrices were investigated. Moss and needle trend patterns resembled those of the ambient air, showing a slight concentration decrease of all compounds, except for hexachlorobenzene. The soil, water and sediment concentrations showed a similar decrease of PAHs, PCBs, and HCHs, but there was no clear trend for DDTs and HCB.     

Characterization of products from fluidized-bed combustion of coal

The technology of fluidized-bed combustion (FBC) of coal generates byproducts that have a series of unique characteristics and potential uses in technological practice. In this study, the products of fluidized-bed combustion (FBC-P) of coal derived from Moravian heat stations, a.s. Zlin, Cinergy Global Resources, Czech Republic, were characterized. Particular attention was paid to determining the chemical composition of FBC-P, the content of polycyclic aromatic hydrocarbons (PAHs) and toxic metals in the water leachates of these FBC-P, the content of unburned carbon, the capability of FBC-P to solidify with water and form a solid matrix, and the method for discovering optimum mixing water content for FBC-P solidification. The results suggest that one of the qualitatively more important means of utilizing FBC-P could be their application during solidification/stabilization (S/S) of wastes, particularly wastewater treatment sludges.     

Stabilization/Solidification of Salt from a Waste Incinerator

ABSTRACT

A laboratory procedure was developed and verified for stabilizing salt produced by an industrial waste incinerator. This procedure is based on salt stabilization by means of an asphalt binder. Conductivity values and relevant anion contents in leachates of stabilized waste with an asphalt coating were near zero. The pH value of these leachates equaled the pH value of the water used, so that the stabilized waste salt represented inert material, posing no environmental hazard. An unusually significant reduction in the volume of processed salt occurred during stabilization. After compacting under 10.4 MPa pressure, the volume of test specimens was almost 55% smaller than the initial salt volume. In practice, this would mean more than a doubling of landfill waste capacity. Volume reduction was successfully explained by means of a mathematical model.     

Stabilization/solidification of salt from a waste incinerator

A laboratory procedure was developed and verified for stabilizing salt produced by an industrial waste incinerator. This procedure is based on salt stabilization by means of an asphalt binder. Conductivity values and relevant anion contents in leachates of stabilized waste with an asphalt coating were near zero. The pH value of these leachates equaled the pH value of the water used, so that the stabilized waste salt represented inert material, posing no environmental hazard. An unusually significant reduction in the volume of processed salt occurred during stabilization. After compacting under 10.4 MPa pressure, the volume of test specimens was almost 55% smaller than the initial salt volume. In practice, this would mean more than a doubling of landfill waste capacity. Volume reduction was successfully explained by means of a mathematical model.     

Biomass of Speckled Alder on an Air-Polluted Mountain Site and its Response to Fertilization

The article summarizes outcomes of a biomass study conducted in a young speckled alder plantation on a cold mountain site. At this location, the previously existing old forest was clear felled because of damage from air pollution, and present-day surface humus is in need of restoration. The intention of this study was to quantify the biomass and nutrients accumulated by alders and their components and assess whether the initial fertilization resulted in increased biomass production and nutrient accumulation in the biomass. Besides the control, two fertilized treatments were installed. In the surface treatment (SUT), the amendment was applied as a base dressing in small circles around trees. In the planting-hole treatment (PHT), the amendment was incorporated into soil inside the planting holes. Five growth seasons after planting and fertilization, six alders from each treatment were harvested including roots. Their biomass was quantified and analyzed for macroelements. The greatest pool of dry mass (DM) was branches in the control and stem wood in the fertilized treatments. The greatest pools of macroelements were leaves and branches. The most pronounced effects of fertilization were recorded in the DM and consequently in the absolute quantities of nutrients. The DM of an average tree in the control, SUT, and PHT was 85, 226, and 231 g, respectively. The absolute contents of nutrients per tree in the fertilized treatments showed the following increases, as compared with the control: (N) 2.5–2.6 times; (P) 1.6–2.4 times; (K) 1.8–2.1 times; and (Mg) 1.8–2.0 times, respectively. Speckled alder responded positively to fertilization.     

Stabilization/solidification of waste ferrous sulphate from titanium dioxide production by fluidized bed combustion product

A treatment procedure to allow the disposal of waste ferrous sulphate was developed. This waste contains sulphuric acid and originates from titanium dioxide production. The process is based on simultaneous neutralization and stabilization/solidification (S/S) of the waste by means of fluidized bed combustion product (FBC-P). The prepared stabilized waste specimens have a solid matrix and their batch leachates display practically neutral pH and also satisfactory conductivity values. The leachate composition is notable in its absence of toxic metals and even iron.     

Characterization of Products from Fluidized-Bed Combustion of Coal

ABSTRACT

The technology of fluidized-bed combustion (FBC) of coal generates byproducts that have a series of unique characteristics and potential uses in technological practice. In this study, the products of fluidized-bed combustion (FBC-P) of coal derived from Moravian heat stations, a.s. Zlin, Cinergy Global Resources, Czech Republic, were characterized. Particular attention was paid to determining the chemical composition of FBC-P, the content of polycyclic aromatic hydrocarbons (PAHs) and toxic metals in the water leachates of these FBC-P, the content of unburned carbon, the capability of FBC-P to solidify with water and form a solid matrix, and the method for discovering optimum mixing water content for FBC-P solidification. The results suggest that one of the qualitatively more important means of utilizing FBC-P could be their application during solidification/stabilization (S/S) of wastes, particularly wastewa-ter treatment sludges.