Steam reforming of glycerol for syngas generation under cold plasma conditions: A DFT study

Density functional theory (DFT) has been used to investigate the reaction pathways with steam reforming of glycerol under cold plasma conditions. Total energies, energy barriers, and reaction enthalpies at 298.15 K have been calculated at the GGA/PW91/DNP level. The calculation shows that, with the presence of steam, the energy barrier of glycerol conversion is reduced and the conversion from glycerol to H₂ and CO is promoted under cold plasma conditions. The formation of syngas was through a multi-step pathway via the conversion of OHCH₂CHOH, CH₂OH, CH₂O, HCO,·and CH₃, while the recombination of H generated extra H₂. The synthesis of hydrocarbons are from the recombination of·CH₃,·CH₂, and·CH, which could be primarily generated through glycerol dissociation. The structure of glycerol anion was also studied in this work, and it was less stable than the neutral molecule. The route for the formation of OHCH₂CHOH·and CH₂OH·from glycerol anion is thermodynamically favorable.     

Comparison on surface properties and desulfurization of MnO2 and pyrolusite blended activated carbon by steam activation

In this study, MnO₂ and pyrolusite were used as the catalysts to prepare modified activated carbon, that is, AC-Mn and AC-P, respectively, from coals by blending method and steam activation. The Brunauer–Emmett–Teller (BET) results indicated that the AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The relative contents of basic functional groups (i.e., C = O, π-π*) on AC-P were slightly lower than those on AC-Mn, while both contained the same main metal species, namely, MnO. The desulfurization results showed that with 3 wt% of blending ratio, AC-Mn3 and AC-P3 had higher sulfur capacities at 220 and 205 mg/g, respectively, which were much higher than for the blank one (149.6 mg/g). Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn, which might be attributed to the existence of other metals in pyrolusite. After the desulfurization process, MnO were gradually transferred into MnSO₄, and the relative contents of basic functional groups decreased evidently for both AC-Mn3 and AC-P3. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurization.

Implications: MnO₂ and pyrolusite were used as the additives to prepare modified activated carbon from coals by a blending method and by steam activation, that is, AC-Mn and AC-P, respectively. The AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The AC-Mn and AC-P had higher sulfur capacities than a blank one. Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurizatio.     

混合菌利用制酒废水产生的微生物絮凝剂的成分及理化特性研究

对蜡状芽孢杆菌(Bacillus cereus)和膜璞毕赤酵母菌(Pichia membranifaciens)混合后利用制酒废水作为替代培养基产生的复合型微生物絮凝剂XJBF-1进行了成分及理化特性研究。结果表明,XJBF-1的主要成分是多糖(质量分数为63.40%),总蛋白质质量分数仅为0.87%;XJBF-1为线型结构,分子量仅为50 798u,低于一般的微生物絮凝剂;XJBF-1具有较好的热稳定性,这一特性有利于絮凝活性物质的提取和纯化;XJBF-1对糖化酶作用敏感,而对蛋白酶作用不敏感;XJBF-1对鱼苗基本没有急性毒性,可以作为无毒水处理剂使用。     

四川酸性物湿沉降模式及预测

酸沉降是一复杂的大气物理和化学过程，涉及诸多复杂影响因素。目前，我国酸雨湿沉降模式还仅限于模拟云下洗脱成酸过程，而对云中的成酸过程还未进行深入研究，这不仅在理论上不完善，而且更重要是在许多情况下与我省实际情况不符。本课题针对四川省特定的地理，气象特点和严重的大气污染情况，并借鉴国外研究成果，提出了考虑酸性沉降的云中和云下成酸过程和各种影响因素的综合酸雨湿沉降模式，并根据此模式来估算和预测四川省酸雨     

大气中SO2的液相氧化研究

大气中ＳＯ２液相氧化是形成酸雨的重要途径，降雨中含有各种无机离子和有机物质，它们可能催化或抑制液相氧化反应的进行。本文根据四川酸雨样品组成，进行了ＳＯ２在模拟雨水及实际雨水中的氧化实验，考查了Ｖ，Ｆｅ，Ｍｎ等离子对ＳＯ２氧化的催化作用，Ｈ２Ｏ２对ＳＯ２的氧化以及降水中有机物质甲醛对各反应的影响。实验结果为了解酸雨的成固，研究酸雨控制对策提供了科学依据。     

低氮燃烧器改造后再热器管屏积渣原因分析

针对某发电厂锅炉低氮燃烧器改造后发生的高温再热器管屏积渣问题,从运行参数、 配煤方式、水平烟道吹灰器型式及受热面变形等方面进行了分析,提出了针对性的解决措施。结果表明:运行中锅炉含氧量偏低,导致炉膛出口烟温升高是造成高温再热器管屏间积渣的主要原因。     

微波加热对活性炭表面基团及其对SO2吸附性能的影响

采用了微波加热技术,通过在不同微波功率和辐射时间条件下对不同粒径活性炭进行改性,研究了改性前后活性炭的表面化学基团、元素组成的变化,以及对SO2吸附性能的影响.结果表明,经过微波改性后活性炭的SO2吸附性能大为提高,微波功率是影响改性活性炭脱硫性能的主要因素.活性炭经微波热处理后,酸性基团发生分解,表面含氧量减少,碱性特征增强,是吸附性能增加的主要原因之一.     

生物脱硫中细菌的载体培养条件优化与动力学研究

选用氧化亚铁硫杆菌作为烟气脱硫的主要菌种在活性炭载体上进行固定化培养,研究了不同培养条件下氧化亚铁硫杆菌的生长过程,考察了细菌在载体中培养时接种量、载体投加量对细菌生长的动力学过程的影响,同时通过计算机拟合,确定了各个条件下的细菌生长动力学参数．从而确定了培养的优化条件。     

软锰矿浆烟气脱硫反应器试验研究

研究了喷射鼓泡反应器 (JBR)的桨叶直径、桨叶埋深和气体喷射管分布等结构参数对脱硫率和锰浸出率的影响 ,从而优化了反应器结构。     

考虑偏应力比影响的主应力轴旋转下重塑黄土变形研究

采用浙江大学空心圆柱扭剪仪对重塑黄土试样进行了3种复杂应力路径下的试验,研究了主应力轴旋转条件下偏应力比η对重塑黄土变形特性的影响。试验结果表明,不同偏应力比下重塑黄土的强度差异较大,η=0.133时归一化强度最小,而η=0.433时强度最大,偏应力比η从0.133到0.5时归一化强度呈现增大—减小—增大—减小的规律。主应力轴旋转对重塑黄土的各应变增量均有影响,并且对中间主应变增量的影响最大,其中大主应变和小主应变在ε-q平面内对称开展,且总体表现出Δεz0,Δεθ0的趋势,中间主应变整体呈现Δεr0的发展趋势,当应力主轴旋转目标角度α45°时,中间主应变呈现出不同的开展形式,重塑黄土在应力主轴旋转下向异性较为显著。