Application of dynamic models to estimate greenhouse gas emission by wastewater treatment plants of the pulp and paper industry

Greenhouse gas (GHG) emission in wastewater treatment plants of the pulp-and-paper industry was estimated by using a dynamic mathematical model. Significant variations were shown in the magnitude of GHG generation in response to variations in operating parameters, demonstrating the limited capacity of steady-state models in predicting the time-dependent emissions of these harmful gases. The examined treatment systems used aerobic, anaerobic, and hybrid—anaerobic/aerobic—biological processes along with chemical coagulation/flocculation, anaerobic digester, nitrification and denitrification processes, and biogas recovery. The pertinent operating parameters included the influent substrate concentration, influent flow rate, and temperature. Although the average predictions by the dynamic model were only 10 % different from those of steady-state model during 140 days of operation of the examined systems, the daily variations of GHG emissions were different up to ±30, ±19, and ±17 % in the aerobic, anaerobic, and hybrid systems, respectively. The variations of process variables caused fluctuations in energy generation from biogas recovery by ±16, ±17, and ±14 % in the three examined systems, respectively. The lowest variations were observed in the hybrid system, showing the stability of this particular process design.     

Effects of surfactant and temperature on biotransformation kinetics of anthracene and pyrene

The biotransformation and mineralization of a mixture of two polycyclic aromatic hydrocarbons (PAHs), anthracene and pyrene, which are known contaminants of soil and groundwater, by an enrichment culture in the presence or absence of 100 mg l(-1) Tergitol NP-10, a non-ionic surfactant, and at temperatures of 10 degrees C and 25 degrees C were investigated. The overall biotransformation of 2 mg l(-1) total PAHs with free cell suspensions in batch culture was greater than 97.2% at both examined temperatures. At 25 degrees C, the overall mineralization of anthracene was 48.8% and that of pyrene was 66.1%. However, the decrease of temperature to 10 degrees C had a negative effect on the mineralization of PAHs and reduced it to 18.5% and 61.5% for anthracene and pyrene, respectively. Using a higher PAHs concentration of 20 mg l(-1) at 25 degrees C, the overall biotransformation of anthracene was 80.7% and that of pyrene was 100%, where only 17.3% anthracene and 7.6% pyrene were mineralized to carbon dioxide and water. The addition of surfactant at 25 degrees C increased the overall mineralization of anthracene and pyrene to 33.0% and 27.6%, respectively. However, the addition of surfactant at 10 degrees C had a negative impact on the overall biotransformation of anthracene and pyrene, reducing them to 20.6% and 14.0%, respectively. These results have significant implications in the bioremediation of PAHs-contaminated sites.     

Pilot-scale application of a single-stage hybrid airlift BioCAST bioreactor for treatment of ammonium from nitrite-limited wastewater by a partial nitrification/anammox process

Environmental Science and Pollution Research - This paper presents the treatment of a nitrite-limited wastewater by partial nitrification/anammox process under different dissolved oxygen (DO)...     

Removal of pyrene and benzo(a)pyrene from contaminated water by sequential and simultaneous ozonation and biotreatment.

The removal of pyrene and benzo(a)pyrene from contaminated water by sequential and simultaneous ozonation-bioremediation techniques was investigated. During the sequential treatment, ozonation using 0.5 or 2.5 mg/L ozone was used as a pretreatment process, whereas, during the simultaneous treatment process, ozonation of hydrocarbon-contaminated water at a predetermined duration using 0.5 mg/L ozone was made in the presence of microbial biomass. Ozonation was not beneficial for the removal of pyrene. However, despite a decreased specific biodegradation rate, ozonation improved the overall elimination of benzo(a)pyrene during both treatment processes. The overall removal of benzo(a)pyrene increased from 23 to 91% after exposure of the water to 0.5 mg/L ozone for 30 minutes during the simultaneous treatment process and further to 100% following exposure to 2.5 mg/L ozone for 60 minutes during the sequential treatment mode, demonstrating the benefits of combined ozonation-biological treatment for the removal of polycyclic aromatic hydrocarbons.