The grassroot development planning process: the role of physical planning in the rural environment

The concern of this paper is with the spatial consequences of development in a given rural setting and the way in which physical planning fits into the revival of a dying rural area, particularly in Third World Countries. It is based on experience derived from Dekinal in Benue State, Nigeria and endeavours to define a rural area by briefly discussing its characteristics and highlighting its problems. It proposes a comprehensive development planning process to induce development based on available resources.     

Behavior of a surface applied radionuclide and a dye tracer in structured and repacked soil monoliths

There has been increasing evidence in recent years about the impact of soil structure on vadose zone hydrology and the distribution of surface applied chemical substances. We have carried out a combined dye and radionuclide tracer study on two monoliths from the same location, one structured and one repacked, as part of an ongoing study to investigate the link between preferential flow, leaching of surface applied substances and their distribution within the soil.A tracer solution containing 1300 Bq/L (58)Co and 0.31 micromol/L Sulforhodamine B (SB) was added with roughly constant irrigation during a period of three weeks. The dye served as a tracer for water movement within the soil and thus allowed linkage of the radiotracer ((58)Co) with the flow pattern. Both were monitored in the outflow and measured within profile sections after monolith disassembly. Preferential flow in the structured monolith promoted the bypass and transport of both tracers, although transport was impeded at depths greater than 30 cm by compacted soil and reduced hydraulic conductivity. Eighty four percent of radiocobalt and 8% of SB were found in the upper 4 cm of the structured monolith. The homogenized monolith, on the other hand, showed mostly chromatographic infiltration and a more efficient soil filtering capacity with 91% of radiocobalt and 20% SB residing in the upper 4 cm. Furthermore no tracer was found in the outflow of the homogenized monolith during normal to high irrigation or at greater depth within the monolith. We have related flow characteristics and sorption of radiotracers by quantifying dye distributions and radionuclide activities throughout the profiles. Activities within the flow paths are up to 20-times higher than those measured in the soil matrix, and a fraction of radiocobalt follows the dye tracer in spite of cobalt's low mobility. The dye can thus be used to trace radionuclide distribution within the soil block.     

Removal of Remazol Brilliant Violet-5R dye using periwinkle shells

The purpose of this research is to obtain optimal processing conditions for the adsorption of Remazol Brilliant Violet-5R (RBV-5R) dye onto activated carbon prepared from periwinkle shells (PSAC) by chemical activation with KOH using response surface methodology. Central composite design (CCD) was used to determine the effects of three preparation variables; CO₂ activation temperature, CO₂ activation time and KOH:char impregnation ratio (IR) on two responses; percentage RBV-5R dye removal and PSAC yield. Based on the CCD, two quadratic models were developed for percentage RBV-5R dye removal and PSAC yield, respectively. The most influential factor on each experimental design response was identified from the analysis of variance (ANOVA). The optimum conditions for the adsorption of RBV-5R dye onto PSAC were CO₂ activation temperature of 811 °C, CO₂ activation time of 1.70 h and IR of 3.0, resulting in 81.28% RBV-5R dye removal and 28.18% PSAC yield. PSAC prepared under optimum conditions was mesoporous with a Brunauer–Emmett–Teller surface area of 1894 m²·g^?1, total pore volume of 1.107 cm³·g^?1 and average pore diameter of 2.32 nm. The surface morphology and functional groups of the activated carbon were respectively determined from the scanning electron microscopy and Fourier transform infrared analysis.     

Identification of best available techniques in the seafood industry: a case study

A Best Available Techniques (BAT) analysis of a mussel canning processing facility in northwest Spain was undertaken to investigate potential cleaner production and efficiency improvements. Potential techniques were identified from the literature and from our experience in the seafood sector. BATs were then assessed for possible implementation in a mussel canning facility. This work describes, in considerable detail, the advantages and disadvantages of the techniques discussed.     

An FTIR investigation of isocyanate skin absorption using in vitro guinea pig skin

Isocyanates may cause contact dermatitis, sensitization and asthma. Dermal exposure to aliphatic and aromatic isocyanates can occur in various exposure settings. The fate of isocyanates on skin is an important unanswered question. Do they react and bind to the outer layer of skin or do they penetrate through the epidermis as unreacted compounds? Knowing the kinetics of these processes is important in developing dermal exposure sampling or decontamination strategies, as well as understanding potential health implications such exposure may have. In this paper the residence time of model isocyanates on hairless guinea pig skin was investigated in vitro using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectrometry. Model isocyanates tested were octyl isocyanate, polymeric hexamethylene diisocyanate isocyanurate (pHDI), polymeric isophorone diisocyanate isocyanurate (pIPDI) and methylenediphenyl diisocyanate (MDI). Isocyanates in ethyl acetate (30 microL) were spiked directly on the skin to give 0.2-1.8 micromol NCO cm(-2) (NCO = -N=C=O), and absorbance of the isocyanate group and other chemical groups of the molecule were monitored over time. The ATR-FTIR findings showed that polymeric isocyanates pHDI and pIPDI may remain on the skin as unreacted species for many hours, with only 15-20% of the total isocyanate group disappearing in one hour, while smaller compounds octyl isocyanate and MDI rapidly disappear from the skin surface (80+% in 30 min). Isocyanates most likely leave the skin surface by diffusion predominantly, with minimal reaction with surface proteins. The significance of these findings and their implications for dermal exposure sampling and isocyanate skin decontamination are discussed.     

Evaluation of various tests for the diagnosis of soil contamination by 2,4,5-trichlorophenol (2,4,5-TCP)

Soil response to contamination with 2,4,5-triclorophenol was studied to test the validity of the concept of Generic Reference Levels (GRL), the main criterion used to define soil contamination. Soil samples were artificially contaminated with doses between 0 and 5000 mg kg⁻¹ of 2,4,5-triclorophenol, and analysed by various tests. Where possible, the response of soils to the contaminant was modelled by a sigmoidal dose-response curve in order to estimate the ED₅₀ values. The tests provided different responses, but only microbial biomass-C and dehydrogenase and urease activities demonstrated soil deterioration in response to contamination. The results suggest that the diagnosis of soil contamination has been greatly simplified in the legislation by the provision of a single figure for each compound, and that the GRL concept could perhaps be substituted by measurement of ED₅₀ values, which better reflect the alteration of a soil due to the presence of a xenobiotic substance.     

The clinical impact of the first-trimester nuchal translucency between the 95th–99th percentiles

Objectives

To evaluate the clinical significance of nuchal translucency (NT) between the 95th–99th percentile in terms of typical and atypical chromosomal abnormalities (ACAs), associated fetal congenital defects and postnatal outcome.

Methods

A retrospective cohort study of fetuses with NT between the 95th–99th percentile. Data regarding the rate of associated fetal defects, genetic abnormalities and postnatal outcome were collected.

Results

A total of 306 cases of fetuses with an NT between the 95th–99th percentiles were included. The overall rate of genetic abnormalities was 12.1% (37/306). Chromosomal abnormalities were found in 10.1% (31/306) of cases and 2% were ACA (6/306). Within this group, two were pathogenic Copy Number Variants (CNVs) and four were single gene disorders. The overall rate of fetal congenital defects was 13.7% (42/306). All ACAs were found in fetuses with congenital defects. Postnatally, a new diagnosis of a single gene disorder was made in 0.85% of cases (2/236).

Conclusions

The presence of an NT between the 95th–99th percentiles carries a 10-fold increased risk of fetal defects, representing an indication for referral for a detailed fetal anatomy evaluation. The risk of ACA is mainly related to the presence of fetal defects, irrespective of the combined test risk.