Improved computational model (AQUIFAS) for activated sludge, integrated fixed-film activated sludge, and moving-bed biofilm reactor systems, Part I: Semi-empirical model development

Research was undertaken to develop a model for activated sludge, integrated fixed-film activated sludge (IFAS), and moving-bed biofilm reactor (MBBR) systems. The model can operate with up to 12 cells (reactors) in series, with biofilm media incorporated to one or more cells, except the anaerobic cells. The process configuration can be any combination of anaerobic, anoxic, aerobic, post-anoxic with or without supplemental carbon, and reaeration; it can also include any combination of step feed and recycles, including recycles for mixed liquor, return activated sludge, nitrates, and membrane bioreactors. This paper presents the structure of the model. The model embeds a biofilm model into a multicell activated sludge model. The biofilm flux rates for organics, nutrients, and biomass can be computed by two methods--a semi-empirical model of the biofilm that is relatively simpler, or a diffusional model that is computationally intensive. The values of the kinetic parameters for the model were measured using pilot-scale activated sludge, IFAS, and MBBR systems. For the semiempirical version, a series of Monod equations were developed for chemical oxygen demand, ammonium-nitrogen, and oxidized-nitrogen fluxes to the biofilm. Within the equations, a second Monod expression is used to simulate the effect of changes in biofilm thickness and fraction nitrifiers in the biofilm. The biofilm flux model is then linked to the activated sludge model. The diffusional model and the verification of the models are presented in subsequent papers (Sen and Randall, 2008a, 2008b). The model can be used to quantify the amount of media and surface area required to achieve nitrification, identify the best locations for the media, and optimize the dissolved oxygen levels and nitrate recycle rates. Some of the advanced features include the ability to apply different media types and fill fractions in cells; quantify nitrification, denitrification, and biomass production in the biofilm and mixed liquor suspended solids; and perform dynamic simulations.     

The cause and consequences of road mortality of herpetofauna in durgapur,West Bengal,India

The mortality rate of herpetofauna due to road accidents in one of the busiest tarmacked metalled roads of Durgapur, an industrial town of West Bengal, India was studied. Road survey for 27 days covering a total distance of 94.5 km was conducted. Within this span of time and the total stretch of road, 354 amphibians belonging to 6 species and 133 reptiles belonging to 11 species were observed to be killed in road-accidents. Among amphibians, Duttaphrynus melanostictus and amongst the reptiles Hemidactylus spp. were killed in highest numbers. The stretch of road under survey passed through different habitat patches like’s agricultural land, human habitation, dumping area, fragmented forest and wetland. On an average, 18 herpetofauna was noted to be killed daily. It was difficult to identify the species as the key characters were missing in the remains in a few cases of road casualties. High road mortality of herpetofauna would surely affect the balance of adjoining ecosystems as well as may be crucial for the local herpetofaunal population attributes.     

Sulfate and glutathione enhanced arsenic accumulation by arsenic hyperaccumulator Pteris vittata L.

This experiment examined the effects of sulfate (S) and reduced glutathione (GSH) on arsenic uptake by arsenic hyperaccumulator Pteris vittata after exposing to arsenate (0, 15 or 30 mg As L⁻¹) with sulfate (6.4, 12.8 or 25.6 mg S L⁻¹) or GSH (0, 0.4 or 0.8 mM) for 2-wk. Total arsenic, S and GSH concentrations in plant biomass and arsenic speciation in the growth media and plant biomass were determined. While both S (18-85%) and GSH (77-89%) significantly increased arsenic uptake in P. vittata, GSH also increased arsenic translocation by 61-85% at 0.4 mM (p < 0.05). Sulfate and GSH did not impact plant biomass or arsenic speciation in the media and biomass. The S-induced arsenic accumulation by P. vittata was partially attributed to increased plant GSH (21-31%), an important non-enzymatic antioxidant countering oxidative stress. This experiment demonstrated that S and GSH can effectively enhance arsenic uptake and translocation by P. vittata.     

Social cost of environmental pollution and application of counter measures through clean development mechanism: in the context of developing countries

The developing countries i.e., the non-Annex-I countries (parties to the Kyoto Protocol but not responsible to any reduction target yet) in the Kyoto Protocol whose economies are in transition are also allowed to reduce GHG emissions. Among these, the countries that have accepted the Kyoto Protocol may be benefited from CDM projects to promote sustainable development. The developed countries i.e., the Annex-I countries (that have signed the Kyoto Protocol & are responsible to have specific GHG emission reduction target) or the investing countries, in return, have privilege to purchase CER credits (in units equivalent to one tonne of CO₂ gas emission reduction) to meet the emission target as specified in the Kyoto Protocol. The key step in understanding about CDM is to grasp the concept of “baseline” and “additionality”. The “Baseline” is the emissions level that would have existed if a CDM project had not happened. The feature of an approved CDM project is that the planned reductions would not occur without the additional incentive provided by emission reduction credits; this concept is known as “Additionality”. According to environmental additionality concept, baseline emission minus project emission is equal to emissions reduction. “Investment Additionality,” ultimately rejected during negotiation of the “Marrakech Accords” and “Financial Additionality,” are the two important concepts. The concept of trading of CER matches to the idea of Pigovian tax (equal to the negative externality and which is considered one of the “traditional” means of bringing a modicum of market forces) in Economics, making pollution more costly to the polluter, as the polluters have negative cost since they save money by polluting; hence, there are supposed negative externalities associated with the market activity. Economic theory predicts that in an economy where the cost of reaching mutual agreement between parties is high and where pollution is diffuse, Pigovian tax will be an efficient way to promote the public interest and will lead to an improvement of the quality of life measured by the Genuine Progress Indicator and other human economic indicators, as well as higher gross domestic product growth. We can seek a level of pollution such that the marginal savings (MS) to one polluting unit from pollution (−MC) is equal to marginal damage (MD) from pollution over the entire population, since pollution is a public bad i.e., MS (x*) = ∑MD_i (x*) where ∑D_i (x) is the total damage. Though the responsibility of reduction in emission does not lie on the non-Annex-I countries, still effort of maintaining global emission balance can be expected equally from developed and developing countries. The responsibilities of Kyoto Protocol are (a) to reduce global GHG emissions, (b) to bring about sustainable development in the developing countries lie on above two groups since its effect on February 16, 2005. Different polluters have different costs of pollution control. The least costly way of controlling pollution from various sources that reflects different costs of pollution control making the set of environmental regulations to achieve the emission target at the lowest cost makes the regulation cost-effective. Though efficiency is not attainable for many regulations, cost-effectiveness is attainable.     

Effect of fatty acids and oils on photodegradation of azadirachtin‐A

Abstract

Azadirachtin‐A on exposure to UV‐light (254 nm) as a thin film on glass surface gave a isomerised (Z)‐2‐ methylbut‐2‐enoate product. Half‐life of azadirachtin‐A as thin film under UV light was found to be 48 min. Azadirachtin ‐A was irradiated along with saturated and unsaturated fatty acids, and fatty oils under ultra‐violet light as thin film. Saturated fatty acid increased the rate of photodegradation of azadirachtin‐A, whereas unsaturated fatty acids such as oleic, linoleic and elaidic acid reduced the rate of degradation. Castor, linseed and olive oil accelerated the rate of degradation, whereas neem oil showed no or little change in the rate of degradation of azadirachtin‐A. None of these fatty acids and fatty oils were effective in controlling the rate of degradation of azadirachtin‐A under UV‐light as thin film.     

Response surface optimization of a dynamic dye adsorption process: a case study of crystal violet adsorption onto NaOH-modified rice husk

The adsorption of crystal violet from aqueous solution by NaOH-modified rice husk was investigated in a laboratory-scale fixed-bed column. A two-level three factor (2³) full factorial central composite design with the help of Design Expert Version 7.1.6 (Stat Ease, USA) was used for optimisation of the dynamic dye adsorption process and evaluation of interaction effects of different operating parameters: initial dye concentration (100–200 mg L^?1), flow rate (10–30 mL min^?1) and bed height (5–25 cm). A correlation coefficient (R ²) value of 0.999, model F value of 1,936.59 and its low p value (<0.0001) along with lower value of coefficient of variation (1.38 %) indicated the fitness of the response surface quadratic model developed during the present study. Numerical optimisation applying desirability function was used to identify the optimum conditions for a targeted breakthrough time of 12 h. The optimum conditions were found to be initial solution pH?=?8.00, initial dye concentration?=?100 mg L^?1, flow rate?=?22.88 mL min^?1 and bed height?=?18.75 cm. A confirmatory experiment was performed to evaluate the accuracy of the optimised procedure. Under the optimised conditions, breakthrough appeared after 12.2 h and the column efficiency was determined as 99 %. The Thomas model showed excellent fit to the dynamic dye adsorption data obtained from the confirmatory experiment. Thereby, it was concluded that the current investigation gives valuable insights for designing and establishing a continuous wastewater treatment plant.     

PBDEs in leachates from municipal solid waste dumping sites in tropical Asian countries: phase distribution and debromination

Polybrominated diphenyl ethers (PBDEs) are extensively used as flame retardants in many consumer products, and leachates from landfills have been identified as one of the possible sources of PBDEs in the environment. Meanwhile, the unprecedented economic and population growths of some Asian countries over the last decade have led to significant increases in the amount of waste containing PBDEs in that region. This study investigates the status of PBDEs in leachates from municipal solid waste dumping sites (MSWDS) in tropical Asian countries. A total of 46 PBDE congeners were measured, both in the adsorbed (n?=?24) and dissolved (n?=?16) phases, in leachate samples collected, from 2002 to 2010, from ten MSWDS distributed among the eight countries of Lao PDR, Cambodia, Vietnam, India, Indonesia, Thailand, the Philippines, and Malaysia. PBDEs were predominantly found in the adsorbed phase. Partitioning of PBDEs in the dissolved phase was associated with the presence of dissolved organic matter; the apparent organic carbon-normalized partition coefficients (K′_oc) of the BDE congeners were lower by two to four orders of magnitude than the K _oc predicted from the octanol–water partition coefficients (K _ow). The total PBDE concentrations from mono- to deca-BDEs ranged from 3.7 to 133,000 ng/L, and showed a trend toward higher concentrations in the more populous and industrialized Asian countries. The congener profiles in the leachates basically reflected the composition of PBDE technical mixtures. The occurrence of congeners not contained, or in trace concentrations, in technical products (e.g., BDEs 208, 207, 206, 202, 188, 179, 49, 17/25, 8, 1) was observed in most of the leachate samples, suggesting the debromination of technical mixtures, including BDE-209, in the MSWDS of tropical Asian countries. Moreover, the temporal trend indicated the reduction of BDE-209 over time, with a corresponding increase in and/or emergence of lower brominated PBDE congeners. The results indicated that MSWDS of tropical Asian countries are potential sources of environmental PBDEs, which may be transported to the aquatic environment via dissolution with dissolved organic matter. MSWDS could be amplifiers of PBDE toxicity in the environment, possibly through debromination.     

Biophysical and socioeconomic characterization of a water-stressed area and simulating agri-production estimates and land use planning under normal and extreme climatic events: a case study

This study aims in linking the biophysical and socioeconomic data base layers with the technical coefficients or simulation models for agri-production estimates and land use planning under normal and extreme climatic events, and exploring the resource and inputs management options in village Shikohpur, Gurgaon district located in the northwest part of India. The socioeconomic profile of Shikohpur is highly skewed with mostly small and marginal farmers. Though the areas under wheat in Shikohpur are increasing, the productivity is declining or remaining stagnant over the years. Most of the area during kharif season (June-September) remains fallow. Pearl millet based cropping systems (pearl millet-mustard and pearl millet-wheat) are predominant. Soils are mostly loamy sand to sandy loam with average of 70-80% sand content. Organic C content in soil is less than 0.3%, due to high prevailing temperature with little rainfall and also intensive agriculture followed in this region. Though the annual average seasonal rainfall in Gurgaon did not have much variation over the years, occurrence of extreme climate events has increased in the last two decades. The crop intensity is low and the water table is declining. Water and nitrogen production functions were developed for the important crops of the region, for their subsequent use in scheduling of the inputs. InfoCrop, WTGROWS and technical coefficients were used for crop planning and resource management under climate change and its variability, extreme events, limited resource availability and crop intensification. These will help in disseminating necessary agro-advisories to the farmers so that they will be able to manipulate the inputs and agronomic management practices for sustained agricultural production under normal as well as extreme climatic conditions.